AIM Sports Tactical Shotgun Quad Rail User Manual
Parts Included:
(A)
1 qty. Battle rail
(B)
6 qty. 15/64” beveled head allen screws
(C)
4 qty. 23/64” beveled head allen screws
(D)
2 qty. 1” beveled head allen screws
(E)
2 qty. 1 11/64” beveled head allen screws
(F)
2 aluminum barrel/magazine tube clamps
(G)
2 qty. allen wrenches
(H)
1 qty. 1/4” trigger pin
(I)
1 qty. 3/16” trigger pin
(J)
2 plastic insert spacers
(K)
1 shell holder
Additional tools required:
• Mallet
• Pin/drift punches
• Optional – thread locking compound
FEATURES
• Black a nodized aircr aft grade aluminum
• Accep ts all standar d Weaver / Picatinny 1913 accesso ries
• No gunsm ithing requir ed
• Design a llows for unimp eded loadin g / unloading
• Compatible wi th Remington 870 & Rem ington 1100
NOTES:
AIM SPORTS INC. WARRANTY
LIMIT ED LIFETIME WARR ANTY - USA & CANADA O NLY
The Aim Sp orts Inc. Limi ted Lifetime War ranty covers a gainst defect s in materials a nd workmansh ip.
Aim Spor ts Inc. will rep lace or repair d efective pro duct(s) upon insp ection by our tec hnical staf f. Defects
or damage f rom abnormal u se, improper st orage, unautho rized modifi cations, unau thorized rep air,
misuse, ne glect, abus e, alteration or i mproper inst allation will v oid the produc t(s) warranty and e ligibilit y.
Limited L ifetime Warran ty covers item(s) pu rchased from a n authorized de aler, within the fi rst 90 days
of owners hip, with proof of r eceipt purc hase (duplicat ions only). Aim Spo rts Inc. will w aive the $10.00
shippi ng and handlin g fee for returned p roduct(s). Returne d items over 90 days o f ownership or n o proof
of recei pt purchase pr ior to 90 days, a $10.00 fee w ill apply to cove r shipping an d handling char ges.
Make che cks or money orde rs payable to: Aim S ports Inc.
RETURNING ITEMS
Before shi pping item(s) bac k to Aim Sports I nc. a Return Autho rization Numb er (RA#) must be ob tained
by callin g Technical Assi stance. All ret urn item(s) must be re ceived with RA #. There will be a del ay in
proces sing for all item (s) received with out RA#.
DO NOT ATTEM PT TO SHIP YOUR PRODUCT BACK WI THOUT FIRST
CONTACTIN G OUR TECHNICAL ASSISTANCE:
WE WILL REPLACE O R REPAIR ANY DEFECTIVE ITEM THAT IS
PURCHASED OR MA NUFACTURED BY AIM SPORTS INC.
IMPORTANT NOTICE!
AIM SPORTS INC.
TECHNICAL ASSISTANCE
Telephone: (8 55) ASK-4AIM
E-mail: RMA@aimsportsinc.com
Tactical Shotgun Quad Rail
with 6 Round Shell Carrier
Downloadable PDF Version Online
Quick Start ManualAIMSPORTSINC.COM
Step 1: Locate barrel/magazine tube clamp and two 1 11/64”
screws. Assemble clamp using the two beveled holes finger
tight only. Note that the openings are different sizes and
shapes. The smaller sized opening attaches to the barrel, and
the larger opening attaches to the magazine tube.
Step 2: Disassemble the clamp and assemble it onto the
barrel/magazine tube in the same position pictured on left.
Do not tighten the screws down all the way as you will need
to be able to align the clamp to the battle rail in Step 8.
Step 3: Lay the shotgun on a flat surface, and remove the
trigger assembly pins by using a pin punch. Leave the trigger
assembly in place.
Step 4: Slide the battle rail over the barrel and position
it over the receiver.
Step 5: Insert the plastic spacers provided on both sides
of the receiver. Align the holes in the spacers with the
trigger pin holes in the receiver with a punch or drift pin.
Step 6: Insert the new provided trigger pins into the
appropriate sized trigger pin hole, using a rubber
mallet if needed.
Step 7: Insert the provided 23/64” allen screw into
each end of the trigger pins and tighten with the
provided allen wrench.
Step 8: Align the battle rail with the barrel/
magazine clamp, and install 1” screw and tighten.
Tighten screws on clamp as well.
Step 9: Locate shell holder and 6 15/64” screws.
Step 10: Attach shell holder to rail side
plate using the six small screws provided.
Step 11: WARNING – make sure firearm is
unloaded before performing final step. Cycle the
action and test the trigger for proper function.
Loading...