AIM Sports H-style Bipods User Manual
NOTES:
CAUTIO N
Failure to mount bipod with legs folding forward may affect
firearm accuracy or cause stock damage.
AIM SPORTS INC. WARRANTY
LIMIT ED LIFETIME WARR ANTY - USA & CANADA O NLY
The Aim Sp orts Inc. Limi ted Lifetime War ranty covers a gainst defect s in materials a nd workmansh ip.
Aim Spor ts Inc. will rep lace or repair d efective pro duct(s) upon insp ection by our tec hnical staf f. Defects
or damage f rom abnormal u se, improper st orage, unautho rized modifi cations, unau thorized rep air,
misuse, ne glect, abus e, alteration or i mproper inst allation will v oid the produc t(s) warranty and e ligibilit y.
Limited L ifetime Warran ty covers item(s) pu rchased from a n authorized de aler, within the fi rst 90 days
of owners hip, with proof of r eceipt purc hase (duplicat ions only). Aim Spo rts Inc. will w aive the $10.00
shippi ng and handlin g fee for returned p roduct(s). Returne d items over 90 days o f ownership or n o proof
of recei pt purchase pr ior to 90 days, a $10.00 fee w ill apply to cove r shipping an d handling char ges.
Make che cks or money orde rs payable to: Aim S ports Inc.
RETURNING ITEMS
Before shi pping item(s) bac k to Aim Sports In c. a Return Autho rization Numb er (RA#) must be ob tained
by callin g Technical Assi stance. All ret urn item(s) must be re ceived with R A#. There will be a del ay in
proces sing for all item (s) received with out RA#.
DO NOT ATTEM PT TO SHIP YOUR PRODUCT BACK WI THOUT FIRST
CONTACTIN G OUR TECHNICAL ASSISTANCE:
WE WILL REPLACE O R REPAIR ANY DEFECTIVE I TEM THAT IS
PURCHASED OR MA NUFACTURED BY AIM SPORTS INC.
IMPORTANT NOTICE!
AIM SPORTS INC.
TECHNICAL ASSISTANCE
Telephone: (8 55) ASK-4AIM
E-mail: RMA@aimsportsinc.com
Downloadable PDF Version Online
AIMSPORTSINC.COM
H-STYLE
BIP ODS
Quick Start Manual
H-STYLE BIPODS
BPHS01
H-Style Spring
Tension Bipod (short)
Always check and be cer tain that the firearm is unloaded
before undertaking any work upon it.
BPHS02
H-Style Spring
Tension Bipod (medium)
CAUTIO N
BPHS03
H-Style Spring
Tension Bipod (tall)
INSTALLATION WITH WEAVER / PICATINNY RAIL
For installation on most rifles with a Weaver / Picatinny rail fixed to
the stock / hand guard. Make sure to mount the bipod with legs
folding forward.
1. Loosen the mounting screw on the side of the bipod rail adapter.
2. Slide the rail adapter into the desired position on the rail.
3. Insert the mounting screw into the rail adapter and tighten the screw
to ensure a snug fit. Do NOT over tighten the screw.
INSTALLATION WITH SLING SWIVEL STUD
For installation on rifles with a sling swivel stud only.
1. Loosen the tension dial located in the center of the bipod until the rail
adapter comes loose and can be removed.
2. Place the t wo studs protruding from the attachment claws into the holes
on either side of the sling swivel stud.
3. Tighten the tension dial until the mount is tight. Do NOT over tighten.
4. To use sling in conjunction with bipod, attach front sling swivel to the
lower half of the attachment claws.
BIPOD ADJUSTMENTS
1. With bipod legs in the shooting position (unfolded), adjust the leg length
by pushing the locking button located midway on the leg, and pull the
leg until it locks into the nex t position.
2. Keep the button depressed and move the legs back and forth until you
reach the desired length before releasing the button and locking the legs
into their desired position.
CAUTIO N
Do not reach in front of firearm muzzle to make adjustments or
manipulate the bipod. Failure to comply may cause property
damage, personal injury or death.
When using the bipod in the unfolded (legs down) position, the
firearm must not be pulled rearward or rotated side to side with
the resting surface. Failure to do so may result in the firearm
dropping unexpectedly, causing damage to the firearm or an
unsafe shooting condition.
FEATURES
• Adjustable from 6.5” - 20”
• Mounts directly to sling swivel stud
• Weaver / Picatinny 1913 rail mount
• Spring-loaded, telescoping legs adjust quickly
• Won’t change zero
• Made of aluminum and high carbon steel
• Black hard anodized finish
SPECIFICATIONS
HEIGHT
WEIGHT
Do not over tighten the screws or you may strip the
threaded holes. Stripped holes are NOT covered by warranty.
BPHS01
6.5” - 9”
14 oz.
CAUTIO N
BPHS02
9.5” - 15”
1 lbs. 0.6 oz.
BPHS03
11.5” - 20”
1 lbs. 1.9 oz.
Loading...