Page 1
HyperPen USB Tablet
Installation Guide
1
Page 2
ontents
C
FCC Statement.........................................................................3
EEC Statement.........................................................................4
System Requirements...............................................................5
Contents Checklist.....................................................................6
Tablet Installation
HyperPen USB Driver.......................................................7
Software Installation
Cadix CyberSign screen saver.........................................10
2
Page 3
CC Statement
F
This equipment generates and uses radio frequency energy and if not installed
and used in accordance with the manufacturer’s instructions, it may cause
interference to radio and television reception. This equipment has been tested
and certified to comply with the limits for a Class B computing device, pursuant
to sub-part J of part 15 of FCC Regulation, which are designed to provide reasonable protection against such interference in a residential installation.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by more of the following
measures:
Reorient the receiving antenna
Relocate the computer with respect to receiver
Plug the computer into a different power outlet so that the computer and
receiver are on different branch circuits.
If necessary, the user should consult with the dealer or an experienced radio/
television technician for additional suggestions. The user may find the following
booklet helpful, which was prepared by the Federal Communication
Commission:
“How to Identify and Resolve Radio-TV Interference Problems.”
3
Page 4
EC Statement
E
This device complies with requirement of EEC directive 89/336/EEC
with regard to Electromagnetic Compatibility.
Dieses Gerät entspricht den Anforderungen der EEC-Richtlinie
89/336/EEC für elektromagnetische Verträglichkeit.
Cet appareil est conforme aux exigences de la directive de la
Communauté européenne 89/336/EEC sur la compatibilité
électromagnétique.
Questo apparecchio è conforme alla direttiva comunitaria 89/336/
CEE relativa alla compatibilità elettromagnetica.
Este dispositivo cumple con los requerimientos de la normativa de la
CEE 89/336/EEC en lo referente a Compatibilidad Electromagnética.
4
Page 5
ystem Requirements
S
IBM compatible PC with 200MHz Pentium processor or higher
An available USB port
Microsoft Windows 98
32MB RAM
CD-ROM Drive
Color monitor
5
Page 6
ontents Checklist
C
1
2
USB TABLET
PEN
3
APPLICATION / DRIVER CD
6
Page 7
ablet Installation
T
HyperPen USB Driver
*For the fastest and easiest installation of the HyperPen tablet,we recommend
NOT TO connect your USB tablet until prompted to do so by the
HyperPen driver installation. The HyperPen is also supported by Plug and
Play.
Begin by inserting the autorun installation CD. The following
1
screen appears(Step2).
OR
If the screen in step 2 does not appear,
click Start and choose Run.
In the Run dialog box, type “d” or where your CD
drive is located and click OK.
2
The screen appears.
7
Page 8
3
Click the
HyperPen USB Driver
icon .
4
The welcome screen appears, click “
Next
”.
5
The driver files will begin to install to the proper location.
6
Installation will prompt you to plug in your USB tablet.
8
Page 9
7
Connect the tablet’s USB connector into an available USB port
on your computer.
8
Windows will detect your newly installed Aiptek HyperPen
USB tablet and will proceed with the final steps of the
installation.
You have now successfully installed your HyperPen USB tablet.
9
Page 10
oftware Installation
S
Cadix CyberSign
Begin by inserting the autorun installation CD. The following
1
screen appears(Step2).
If the following screen does not appear, click Start
and choose Run.
In the Run dialog box, type “d:\” where drive is your CD drive and
click OK. Then choose Setup icon.
OR
2
The screen below appears.
3
Click the Cadix Signature icon.
10
Page 11
4
A Welcome dialog box appears. Click “Next” to start the
installation.
5
Choose the tablet you have installed. Click “Next”.
6
Select the directory where you would like Cadix to be installed
, or accept the suggested directory.
Click “Next”.
11
Page 12
7
Y ou can set the Cadix as the default screen saver and click “Y es”, or
click “No” to continue.
You will see a Done! dialog box. Now the installation is
complete!
Continue to install the rest of the software provided on the CD. Click
on the icon of the program you wish to install and follow the on-screen
instructions.
12
Loading...