User’s Guide
Nero Express
www.nero.com
Copyright and Trademark Information
The Nero Express User’s Guide and all contents are copyrighted and the property
of Ahead Software. All rights reserved. This User’s Guide contains materials
protected under International Copyright Laws. No part of this Guide may be
reproduced, transmitted or transcribed without the expressed written permission of
Ahead Software AG.
All brand names and trademarks are properties of their respective owners.
The product and material in this manual is subject to change without prior notice
and does not represent a commitment on the part of the manufacturer, who
assumes no liability or responsibility for any errors that may appear in this manual.
Ahead Software accepts no claims beyond those in the warranty. Ahead Software
accepts no liability for the correctness of the contents of the Nero Express User’s
Guide. The contents of the enclosed software and the Nero Express User’s Guide
is subject to change.
All trademarks are for information purposes only.
Unless you own the copyright or have the permission of the copyright
holder, the unauthorized copying of discs can represent a violation of
national or international laws and may result in serious penalties.
Copyright © 1995 -2003 by Ahead Software
Copyright © 2002 – 2003 Ahead Software AG
REV 1.0
Table of Contents
1 Introduction.......................................................................................... 5
1.1 Welcome to Nero Express ..................................................................5
1.2 OEM vs. Retail Versions of Nero Express .........................................6
2 Installing Nero Express....................................................................... 7
2.1 System Requirements .........................................................................7
2.2 Installing Nero Express.......................................................................8
2.3 Uninstalling Nero Express ..................................................................8
3 Getting Started..................................................................................... 9
3.1 Opening Nero Express for the first time!...........................................9
3.2 Go Nero! Button.................................................................................12
3.3 More Button........................................................................................ 13
3.3.1 Configure .............................................................................................13
3.3.2 Save Tracks To Hard Drive .................................................................13
3.3.3 Erase Disc ...........................................................................................16
3.3.4 Disc Info...............................................................................................18
3.3.5 Cover Designer....................................................................................18
3.4 Nero Toolkit........................................................................................20
3.4.1 Nero CD-DVD Speed...........................................................................20
3.4.2 Nero DriveSpeed .................................................................................21
3.5 Nero Wave Editor (Retail Only)......................................................... 23
4 Data..................................................................................................... 24
4.1 Creating your first data disc .............................................................24
4.2 Bootable Data Discs ..........................................................................31
4.3 For Advanced Users..........................................................................34
4.3.1 Hide Files.............................................................................................34
5 Music .................................................................................................. 35
5.1 Music...................................................................................................35
5.2 Creating your first audio disc........................................................... 36
5.3 Creating a disc with audio and data.................................................41
5.4 MP3 .....................................................................................................45
5.4.1 Information mp3PRO encoder plug-in .................................................48
5.5 WMA....................................................................................................50
5.6 For Advanced Users..........................................................................54
5.6.1 Image Recorder ...................................................................................54
Nero Express Table of Contents • 3
5.6.2 Audio Properties ..................................................................................55
6 Video/Pictures.................................................................................... 61
6.1 Video/Pictures....................................................................................61
6.2 Creating your first video disc ...........................................................61
6.3 Creating your first super video disc ................................................67
6.4 Advanced Users................................................................................. 72
6.4.1 Video and Super Video Properties ......................................................72
7 DVD ..................................................................................................... 74
7.1 DVD .....................................................................................................74
7.2 Selecting your recorder ....................................................................75
7.3 Creating your first DVD disc.............................................................76
7.4 Creating a DVD-Video disc from DVD-Video files...........................77
8 Copy Entire Disc................................................................................ 79
8.1 Copy Entire Disc ................................................................................79
9 Disc Image or Saved Project ............................................................ 84
9.1 Disc Image or Saved Project ............................................................84
9.2 Creating a disc from a disc image ...................................................84
9.3 Creating a disc from a saved project...............................................88
10 Preferences ........................................................................................ 92
10.1 Preferences ........................................................................................92
10.2 General Tab ........................................................................................92
10.3 Cache Tab...........................................................................................94
10.4 Language Tab ....................................................................................95
10.5 Sounds Tab ........................................................................................96
10.6 Expert Features Tab .......................................................................... 97
10.7 Database Tab .....................................................................................98
10.8 Ultrabuffer Tab .................................................................................100
10.9 Dialogs Tab ......................................................................................101
11 Technical Support ........................................................................... 102
11.1 F.A.Q.’s .............................................................................................102
11.2 Contact .............................................................................................104
12 Glossary ........................................................................................... 105
13 Index ................................................................................................. 117
Nero Express Table of Contents • 4
1 Introduction
1.1 Welcome to Nero Express
Welcome to the world of CD burning! Thank you for your purchase of Nero
Express – one of the easiest and most reliable CD recording packages to help
store your data, music, and video on CD or DVD.
With our state-of-the-art technology and nonstop drive for improving our software,
we are continuously implementing the latest know-how, to do our part in making
sure that your burning experience is easy and trouble-free.
As you read this step-by-step instruction guide, it will assist you in creating your
first disc – whether it is Data, Audio, Video, or SVCD. You will soon see how easy
the process can be and you will shortly be on your way to making your first disc!
Ahead Software realized that not everyone is a long time user or an expert their
first time burning a CD and many users needed a little help with their first
recording. So with this understanding, the User’s Guide was created with the very
new users in mind.
Nero Express is a new and innovative wizard based recording application based
on the main application Nero. With the main essentials included such as data,
audio, copy, and video, it will also work with the DVD-RW, and DVD+RW drives.
You are able to record MP3’s, archive your favourite photo’s, among the many
features of this software.
If you are a user of Nero, Nero Express is automatically integrated. For details
about Nero, please see the Nero manual.
Nero Express Introduction • 5
1.2 OEM vs. Retail Versions of Nero Express
OEM stands for Original Equipment Manufacturer. It basically means that the
Ahead software that was bundled with your burner is a smaller version of the Retail
package. It will not have as many features and you would need to upgrade in order
to have full functionality and take advantage of the great new features!
If you are an owner of the Nero Retail version, the following options are included:
Virus checking before burning
Crossfading option
Use of two burners simultaneously
Nero Express Introduction • 6
2 Installing Nero Express
2.1 System Requirements
Your system should come with a pre-installed operating system or you may choose
to upgrade your operating system to the latest. Below you will find a list of those
that Nero Express support. Please check to make sure that you have one of the
following operating systems:
Operating System
Windows 95
Windows 98/SE
Windows ME
Windows NT 4.0 (service pack 6)
Windows 2000 (service pack 2 or higher)
Windows XP
Hardware
Your PC must have a 500 MHz system or higher recommended. Please refer to
the PC manuals that came with your system for system configuration
information.
You must have at least 64 MB RAM memory. Generally, more would be better.
The hard disk access time should be less than 19 milliseconds
Graphics card with 8 MB or higher (for video).
We recommend that Nero Express will be most comfortable to work with in a
screen resolution of 1024x768 or greater.
700 MB of free hard drive space for drive images recommended. Generally,
more would be better.
Nero Express Installing Nero Express • 7
2.2 Installing Nero Express
Step 1: Insert the Nero Express CD-ROM into your CD/DVD drive on your PC.
If you have a feature called “Autorun” activated, this will start your installation
process automatically.
If you do not have “Autorun” activated, you can go to My Computer > Click on the
drive letter of the CD/DVD drive > click setup.exe
Step 2: Follow prompts until you are finished installing the software.
Step 3: Restart your PC
2.3 Uninstalling Nero Express
Step 1: Go to Start > Control Panel > Add or Remove Programs.
In some operating systems, you will find - Start > Settings > Control Panel.
Step 2: Select Nero Express in the Add or Remove Programs window and click
“remove”.
Step 3: In some cases, you will find that when removing software, there will be one
or two files that the operating system will ask if you want them removed since they
may be shared by other programs. If you are unsure, always opt to keep these
files.
Nero Express Installing Nero Express • 8
3 Getting Started
3.1 Opening Nero Express for the first time!
Now that we are ready to start recording your first disc, let us begin by opening the
program Nero Express.
Depending on the version, you can open up the software program as follows:
a. Start >(All) Programs > Nero > Nero 6 > Nero Express.
b. Start >(All) Programs > Nero > Nero 6 Ultra Edition > Nero Express.
c. Start > (All) Programs > Nero > Nero OEM > Nero Express.
F.Y.I.! The path how to open Nero Express described above can differ in
some versions.
Nero Express Getting Started • 9
Step 1: As the window opens up, the software will scan for your CD-R/RW/DVD to
make sure that you have a supported device on your PC. If you do not, please
contact www.nero.com
to find out if your burner is supported or to locate the latest
driver.
F.Y.I.! You can disable this window in the future by checking the box in the
lower hand corner of the window
Step 2: A request for a serial number will only appear if a retail registered version
of Nero 5.5 or Nero Express 5.5 was not found on the system and the following
window will appear:
Please personalize your software by entering your name, company, and serial
number. When you are finished, please click “OK”.
If you have a demo version of Nero Express, please click the “Demo” button for
your trial period.
Nero Express Getting Started • 10
You will have an option to purchase your serial number online so that you are able
to register your software copy.
Step 3: From this window, you will be able to select the project you want to burn.
As you further explore this User’s Guide, you will be able to make the CD of your
choice! Please see the following chapters on how to make various types of
projects.
F.Y.I.! You can switch over to the main application Nero Burning ROM by
selecting the “Nero” button at the bottom.
Nero Express Getting Started • 11
3.2 Go Nero! Button
When this option is selected, you will change over to the more powerful burning
program Nero Burning ROM with additional features and options.
You can toggle back and forth between the user-friendly interface Nero Express
and the full version Nero Burning ROM.
If you are a first time user of software burning products, may we suggest you start
first with Nero Express. As you gradually become familiar with the burning
technology, you can switch over to Nero Burning ROM for a more powerful user
interface and additional features.
Nero Express Getting Started • 12
3.3 More Button
When you click the “More” button on the bottom of the Nero Express screen, an
extra window will appear for additional options
3.3.1 Configure
Change the settings on your Nero Express software for optimal use. When you
click on “More” then the “Configure” button, the “Preferences” window will appear.
You are able to modify the settings for the database, language, cache, and many
other features in this software.
For further information, please have a look on chapter 'Preferences'.
3.3.2 Save Tracks To Hard Drive
You can save individual tracks or an entire disc to your hard drive with this
function. In addition, you are able to play the audio tracks, remove the silences
between the audio tracks and use jitter control. These are some of the many
features in “Save Tracks To Hard Drive”.
Nero Express Getting Started • 13
When you select “Save tracks to hard drive”, a window will appear asking you to
select your drive:
When your drive has been selected, you are now able to view all the files on your
disc.
You will also have various other options in this window.
Select All – To select all the files in your Track List window
Output way – You have the option of Digital or Analog.
Output file format – Select the type of format you would like to save your audio
file as.
Nero Express Getting Started • 14
Settings – Select the stereo or mono settings for your audio file.
Path – Select the place on your hard drive in which you will save your audio file.
File name creation method – Type in the name of your audio file by checking
“User Defined” or select “Manual” for the default name.
Options – A drop-down box will appear when the “Options” button is clicked.
Nero Express Getting Started • 15
Jitter correction - Jitter correction synchronizes the data information by
overlapping the sectors and therefore no gaps are created.
Remove silence – Removes the silences at the end of each audio track.
Automatically generate an M3U playlist of stored audio tracks – This option
will automatically generate a playlist of all the audio tracks that are stored on your
hard disk or CD reading device.
Read speed – Select the speed in which your CD device will read the files.
3.3.3 Erase Disc
When a CD-RW disc is in your drive, you have the option to erase your disc so that
additional data may be added to it.
Nero Express Getting Started • 16
Quick-erase rewritable media – The media will appear to be empty but the data
is not physically erased. The table of contents is left on the disc.
Full-erase rewritable media – This option will fully erase all data on the media.
This procedure will take some time.
Use Multiple Recorders (option only available in the retail package) – Erase
discs in multiple recorders attached to your PC.
Choose erase speed – Select the erase speed.
Nero Express Getting Started • 17
3.3.4 Disc Info
This option will allow you to view all the contents on your disc.
The total capacity and available capacity will be shown in addition to the sessions
and tracks.
3.3.5 Cover Designer
Included with your version of Nero Express is the Nero Cover Designer with
which you are able to create covers and labels for your CD´s and DVD´s using predesigned templates or your own designs.
When launched from or after a Data, Audio or Audio and Data project in Nero
Express, the contents will be automatically imported, saving you the annoyance of
having to manually type them in.
You can also start the Nero Cover Designer independently of Nero Express by going to the Start > All Programs > Ahead Nero > then > Nero Cover Designer.
(For some operating systems, you will find - Start > Programs > Ahead Nero >
Nero Cover Designer
Please see the separate Nero Cover Designer User´s Guide for full instructions
on how to make professional looking covers and labels.
Nero Express Getting Started • 18
Included with your version of Nero Express is Nero’s Cover Designer. You are
now able to create labels for your jewel cases and discs with the pre-designed
templates or create them on your own with the user-friendly interface.
You will have the ability to automatically create playlists and/or filename lists, thus
saving you the annoyance of having to manually type them in. In addition, playlists
from external sources (such as FreeDB) can be accessed and used.
Please see enclosed manual for instructions on how to use this feature.
Nero Express Getting Started • 19
3.4 Nero Toolkit
The Nero Toolkit is a collection of tools and utilities designed to give you detailed
information about your drive(s) as well as advanced control. To start the Nero
Toolkit utilities, go to Start > All Programs > Ahead Nero> then > Nero Toolkit>
then select the desired utility. (For some operating systems, you will find - Start
> Programs > Ahead Nero > Nero Toolkit
3.4.1 Nero CD-DVD Speed
CD-DVD Speed is a CD-ROM/DVD benchmark which can test the some of the
important features of a CD-ROM/DVD drive. These tests include:
Transfer rate
Seek times
CPU usage
Burst rate
DAE quality
Transfer rate
Spinup/spindown time
Insert a relatively full disc into your CD-ROM or CD-R/RW/DVD drive and click
“Start”. It will then start to run all the benchmark tests on your drive.
There are regular updates for this utility so please make sure you go to
www.cdspeed2000.com
Nero Express Getting Started • 20
to check for the latest version from time to time.
The latest important change is the addition of a new test: ScanDisc. Basically,
ScanDisc will show you the quality of a disc.
The test consists of two parts:
File Test which simply reads all files on the disc and reports all errors. This test
can also be used for benchmarking to give you an idea on how well the drive
performs with for example software installing.
Surface Scan checks the quality of each sector and shows the results in a graph.
3.4.2 Nero DriveSpeed
Nero DriveSpeed is an Ahead utility, which will set the reading speed of a CD-
ROM/DVD drive.
When you are running this utility for the first time, this window will appear. You can
detect all the support speeds of your burner by clicking on the “Detect” button and
the information will appear to the left.
You can remove certain supported speeds if you feel they are not needed by
clicking on the “Remove” button.
In addition, you can select the language of your choice by going to the Language
box and choosing your preferred language.
After your speed selection and language has been made, you can view the read
speed and spin down time of your burner.
Nero Express Getting Started • 21
Run at startup – You can select to run Nero Drive Speed when you turn on your
computer.
Start minimized – You can have Nero Drive Speed start when you turn on your
computer but minimized in the background so it will not disturb your work.
Restore speed settings at startup – You can return to default speed settings
once you restart your computer.
The ability for limiting the reading speed of a CD-ROM drive is a must have feature
for high speed drives. Although a high speed drive allows you to transfer data in
less time, there are some disadvantages of using such a drive
A drive faster than 24x can be very noisy which is not surprising as the spindle
speed can be as high as 12000 RPM which is much faster than for example a hard
disk. If the drive only needs to access the CD for a short period of time, for
example software installation, then this is not such a big problem. But it can get
irritating when you're using the drive to play MP3 files. In many cases the noise
from the drive is louder than the sound from the audio file. The data rate of a MP3
file is usually about 16 KB/sec (@128 kbps) which equals to approximately 0.1X!
So a reading speed of 4X is more then adequate for playing MP3's.
You can also use Nero DriveSpeed to increase the DAE speed with some drives.
Asus drives for example set the default DAE speed to 8X while these drives are
actually capable of DAE at up to 20X or even higher!
Speed set after a disc is inserted (Auto Insert Notification must be enabled)
This has been implemented because many drives lose their speed setting when
a new disc is inserted.
Bug fix: speed settings not saved on some configurations
Other small bug fixes/improvements
Nero Express Getting Started • 22
3.5 Nero Wave Editor (Retail Only)
When you right-mouse click on an audio title in an Audio CD compilation, a window
will appear in which you can select the “Audio Editor”.
This will launch the Nero Wave Editor with the audio file you selected where you
can edit your song in the minutest of detail, create enhancements for your audio
track, add fades, effect filters and numerous other features.
Nero Express Getting Started • 23
4 Data
4.1 Creating your first data disc
Step 1: From the project selection page, select Data > Data Disc.
Nero Express Data • 24
Step 2: From this next window, you are now ready to start adding data to your
layout for recording to disc.
Step 3: There are three very simple ways to add data to the layout window to make
this process quick and easy.
Option One
: Click the button to select the files you would like to
burn. A window will appear that looks very similar to Windows Explorer and from
here, you are able to choose the files you would like to record and save on disc.
Once you have selected your file(s), please click Add.
Option Two
: Add data using Windows Explorer - please go to the Start button in
the corner of your screen All Programs > Accessories > Windows Explorer.
F.Y.I.! Some operating systems will have Start > Programs > Windows
Explorer
When the Windows Explorer appears, you can drag the data you would like to
record into the Nero Express layout.
Option Three
: Add data using My Computer - please click the icon. From
this window, you can drag and drop your files into the Nero Express layout.
Nero Express Data • 25
The options for the following feature will vary depending on the project you select.
When selecting Data, MP3, WMA, or CD-Extra (Music and Data) projects, your
window will look like this:
You will have additional options for the date and time for your file name.
See chapter 'For Advanced Users' how to hide files
Nero Express Data • 26
Step 4: Once all your files have been added, click “Next” to prepare your disc for
burning.
Please make your final settings before burning your disc.
Current Recorder – The supported burners you have connected to your PC will be
displayed and the Image Recorder if you chose to save to your hard drive.
Disc Name – Select a title for your disc.
Writing Speed – Select the speed in which you would like to burn.
Number Of Copies – Select the number of copies you would like to burn.
If you are having trouble burning your disc, please refer to Chapter 'Technical
Support' for F.A.Q. information and technical support.
Nero Express Data • 27
When you are ready to burn and click the “More” button at the “Final Burn
Settings” window, another window will appear:
Track-At-Once - With this method, each track is individually written onto the disc.
The write operation is briefly interrupted after each track. This means that a CD-R
or CD-RW can be written on just like any standard disk.
Disc-At-Once - In this mode, all of the tracks are written in a single process onto
the disc without the laser being switched off. This format is best for audio CD’s that
will be played in home and car stereo equipment.
Finalize Disc – The disc will be closed and no additional data or audio can be
written to the disc after finalizing it.
Remove silence at end of *.cda tracks – Each audio track when written will have
a 2-second gap at the end. When checked, this silence is removed.
Nero Express Data • 28
Step 5: Ready to record? Click the “Burn” button and you are on your way to
recording your first data disc! As you are burning, you will receive a status window
of the recording process.
Step 6: When it is completed, you will be notified that the burn process has
completed successfully.
F.Y.I.! As one of the many great features in Nero Express, it has the ability
to make labels for the jewel case and disc you just burned.
Nero Express Data • 29
Step 7: When you click OK after the successful recording, you will be returned
back to the recording window. Please click “Next” to move forward to the following
window.
If you would like to burn the same project again, start another project, make labels,
or add more data to your current disc it can be done from this window.
Nero Express Data • 30
4.2 Bootable Data Discs
Creating bootable CD’s as an emergency startup and backup disc is highly
recommended. Bootable CDs are compatible only under Windows 95/98, Windows
ME, Windows 2000, NT or XP.
Step 1: Select your recorder then, under Data, select “Bootable Data Disc”.
Step 2: You will be brought to the “Disc Content” window where you will be able to
add files. The files and folders will all be visible when you boot from the bootable
disc later on.
Nero Express Data • 31
Step 3: Click the “Add” button to select the files for your bootable disc.
When you have completed adding all your files, click “Finished".
Step 4: When you click on “Next”, a dialog will pop up prompting you to insert a
boot floppy disk. The information required to make a bootable data disc will be read
from the boot floppy disk. These are system files which actually allow a system to
boot from a CD and/or DVD. If you do not have a boot floppy disk or do not know
how to create one, please check the help files of your Windows operating system.
Nero Express Data • 32
Step 5: When the files have been read from the boot floppy disk, you will be at the
“Final Burn Settings” window.
Step 5: When you click the “More” button, you will have additional write options for
your disc. You can determine the maximum write speed, simulate burning, or just
write straight to the disc.
When you have made your selection and are ready to record, please click the
“Burn” button!
F.Y.I.! You cannot make bootable Multisession discs!
Nero Express Data • 33
4.3 For Advanced Users
4.3.1 Hide Files
If you would like to “Hide” files on your CD for extra added security or protection,
this can easily be done from the project window.
Right-mouse click on the file in your project window and select “Properties”.
An additional window will appear with information on your file and the option to
check “Hide” to conceal your file.
Nero Express Data • 34
5 Music
5.1 Music
Audio
Now you can record your favourite audio CD’s, make a compilation of only the
songs you like, record MP3 discs and also WMA. Learn how to make WAV files
and discs to play in your favorite MP3 player too!
Create a CD-Extra disc in which both data and audio are recorded to one disc. You
can play it in either your PC or your home/car stereo.
Editing title in Audio Contents window
When clicking on the title of your audio track, an edit window will appear in which
you can edit the song title.
Nero Express Music • 35
5.2 Creating your first audio disc
Step 1: From the project selection page, select Music > Audio CD.
Step 2: From this next window, you are now ready to start adding audio to your
layout for recording to disc.
Nero Express Music • 36
Step 3: There are three very simple ways to add audio to the layout window to
make this process quick and easy.
F.Y.I.! If you want to make audio CDs from existing MP3/mp3PRO music files
you don’t need to convert these files into WAV files first. Nero includes a free
MP3/mp3PRO decoder, than automatically converts your MP3/mp3PRO files into
the appropriate format while you burn your audio CD. The audio CD can then be
played on all commercially available CD players (and most DVD players), provided
that the player can read CD-R (or CD-RW if you recorded on a CD-RW) discs.
To make your own MP3/mp3PRO files (using music from your audio CDs or audio
files in supported formats such as WAV) you need the Nero MP3/mp3PRO
encoder, which can be purchased separately. You can find out more about the
MP3/mp3PRO encoder in chapter 5.3 or simply visit the Ahead website at
www.nero.com
.
Option One
- Click the button to select the files you would like to
burn. A window will appear that looks very similar to Windows Explorer and from
here, you are able to choose the files you would like to record and save on disc.
Once you have selected your file(s), please click Add.
Option Two
- Add audio using Windows Explorer - please go to the Start button in
the corner of your screen All Programs > Accessories > Windows Explorer.
F.Y.I.! Some operating systems will have Start > Programs > Windows
Explorer
When the Windows Explorer appears, you can drag the audio you would like to
record into the Nero Express layout.
Option Three
- Add audio using My Computer - please click the icon. From
this window, you can drag and drop your files into the Nero Express layout.
Nero Express Music • 37
Editing title in Audio Contents window
When clicking on the title of your audio track, an edit window will appear in which
you can edit the song title.
Step 4: Once all your files have been added, click “Next” to prepare your disc for
burning.
Please make your final settings before burning your disc.
Nero Express Music • 38
For additional Burn Settings information, please refer to Chapter 'Preferences'.
If you are having trouble burning your disc, please refer to Chapter 'Technical
Support' for F.A.Q. information and technical support.
Step 5: Ready to record? Click the “Burn” button and you are on your way to
recording your first audio disc! As you are burning, you will receive a status window
of the recording process.
Step 6: When it is completed, you will be notified that the burn process has
completed successfully.
Nero Express Music • 39
Step 7: If you click OK after the successful recording, you will be returned back to
the recording window. Please click “Next” to move forward to the following window.
If you would like to burn the same project again, start another project, make labels,
or add more data to your current disc it can be done from this window.
Nero Express Music • 40
5.3 Creating a disc with audio and data
Step 1: When creating a disc with both Audio and Data, you can play the audio in
your home or car stereo and view the data files on your PC. From the project
selection page, select Music > Audio and Date CD.
Step 2: From this next window, you are now ready to start adding audio to your
layout. You will add data first and music later.
Nero Express Music • 41
There are three very simple ways to add data to the layout window to make this
process quick and easy.
Option One
- Click the button to select the files you would like to
burn. A window will appear that looks very similar to Windows Explorer and from
here, you are able to choose the files you would like to record and save on disc.
Once you have selected your file(s), please click Add.
Option Two
- Add data using Windows Explorer - please go to the Start button in
the corner of your screen All Programs > Accessories > Windows Explorer.
F.Y.I.! Some operating systems will have Start > Programs > Windows
Explorer
When the Windows Explorer appears, you can drag the data you would like to
record into the Nero Express layout.
Option Three
- Add data using My Computer - please click the icon. From
this window, you can drag and drop your files into the Nero Express layout.
Please click Next
Step 3: From here, you will add your data tracks. Please use the same method for
adding music files as you did for the data above.
Once all your files have been added, click “Next” to prepare your disc for burning.
Nero Express Music • 42
Step 4: Please make your final settings before burning your disc.
For additional Burn Settings information, please refer to Chapter 'Preferences'.
If you are having trouble burning your disc, please refer to Chapter 'Technical
Support' for F.A.Q. information and technical support.
Step 5: Ready to record? Click the “Burn” button and you are on your way to
recording your first data disc! As you are burning, you will receive a status window
of the recording process.
Nero Express Music • 43
Step 6: When it is completed, you will be notified that the burn process has
completed successfully.
Step 7: When you click OK after the successful recording, you will be returned
back to the recording window. Please click “Next” to move forward to the following
window.
If you would like to burn the same project again, start another project, make labels,
or add more data to your current disc, it can be done from this window.
Nero Express Music • 44
5.4 MP3
Step 1: From the project selection page, select Music > MP3 Disc.
Step 2: From this next window, you are now ready to start adding MP3 files to your
layout.
There are three very simple ways to add data to the layout window to make this
process quick and easy.
Nero Express Music • 45
Option One - Click the button to select the files you would like to
burn. A window will appear that looks very similar to Windows Explorer and from
here, you are able to choose the files you would like to record and save on disc.
Once you have selected your file(s), please click Add.
Option Two
- Add data using Windows Explorer - please go to the Start button in
the corner of your screen All Programs > Accessories > Windows Explorer.
F.Y.I.! Some operating systems will have Start > Programs > Windows
Explorer
When the Windows Explorer appears, you can drag the data you would like to
record into the Nero Express layout.
Option Three
- Add data using My Computer - please click the icon. From
this window, you can drag and drop your files into the Nero Express layout.
Once all your files have been added, click “Next” to prepare your disc for burning.
Step 3: Please make your final settings before burning your disc.
If you are having trouble burning your disc, please refer to Chapter 'Technical
Support' for F.A.Q. information and technical support.
Nero Express Music • 46
Step 4: Ready to record? Click the “Burn” button and you are on your way to
recording your first data (MP3) disc! As you are burning, you will receive a status
window of the recording process.
Step 5: When it is completed, you will be notified that the burn process has
completed successfully.
Nero Express Music • 47
Step 6: If you click “OK” after the successful recording, you will be returned back to
the recording window. Please click “Next” move forward to the following window.
If you would like to burn the same project again, start another project, make labels,
or add more data to your current disc it can be done from this window.
5.4.1 Information mp3PRO encoder plug-in
What is ?:
Using advanced technology and music structure analysis, mp3PRO creates files
that are more compact than original mp3 files with equal or better sound quality
and complete backwards and forwards compatibility. Your old mp3 files will play
without a problem on a new mp3PRO player. New mp3PRO files will play correctly
on old mp3 players, however, without the dramatic mp3PRO improvements. Of
course, new mp3PRO files played on a new mp3PRO decoder will provide the
optimal listening experience!
How the mp3PRO technology works:
When making an mp3PRO file, the new mp3PRO encoder splits audio recordings
into two parts. One part analyzes the low frequency band information and encodes
it into a normal mp3 stream. This allows the encoder to concentrate on less
information and allows it to do a better job of encoding. This also maintains
complete compatibility on old mp3 players. The second part analyzes the high
frequency band information and encodes it into a part of the mp3 stream that is
normally ignored by old mp3 decoders. New or upgraded mp3PRO decoders will
tap into this part of the stream and put the two bands back together, resulting in the
full audio bandwidth.
Nero Express Music • 48
More Music on your media:
Offering 128 kbps (kilo bits per second) performance at a 64 kbps encoding rate,
mp3PRO doubles the digital music capacity of flash memory and of compact discs.
For example, traditional audio CDs hold about 15 songs, and an mp3 CD can hold
150 or more songs encoded at 128 kbps. In the near future, when mp3 CD players
incorporate the mp3PRO decoder, consumers will be able to store over 300 songs
on an mp3PRO encoded Compact Disc.
Sound Quality:
The fact is, mp3PRO provides superior sound quality at lower bit rates than
traditional mp3. You simply have to experience the difference yourself.
Download
the new demo version of Nero which includes a 30 times demo version
for the mp3PRO encoder.
If you already own the version 5.5.4.0 or higher of Nero (not the demo version),
then add UNLIMITED
mp3PRO encoder Plug-in
mp3PRO AND MP3 Encoding support with the "Nero
".
If you own an older version of Nero (below 5.5.4.0) you are still able to order the
MP3-Encoder (without "PRO").
The demo and update version of Nero 5.5.4.0 (and future updates) includes a 30
times trial version of the mp3PRO encoder for you to enjoy. After you’ve tested the
encoder 30 times you can decide if you want to buy the unlimited mp3PRO
encoder plug-in. The encoder will let you make both standard mp3s as well as
enhanced mp3PRO files!
If you already own the version 5.0.0.0 or higher (including Nero 5.5) of Nero (not
the demo version), then add UNLIMITED MP3 Encoding support with the "Nero
MP3 encoder Plug-in".
This encoder (without "PRO") cannot be upgraded later to mp3PRO.
Nero Express Music • 49
5.5 WMA
Step 1: From the project selection page, select Music > WMA Disc.
Step 2: In the next window, you are now ready to start adding WMA files to your
layout.
Nero Express Music • 50
There are three very simple ways to add data to the layout window to make this
process quick and easy.
Option One
- Click the button to select the files you would like to
burn. A window will appear that looks very similar to Windows Explorer and from
here, you are able to choose the files you would like to record and save on disc.
Once you have selected your file(s), please click Add.
Option Two
- Add data using Windows Explorer - please go to the Start button in
the corner of your screen All Programs > Accessories > Windows Explorer.
F.Y.I.! Some operating systems will have Start > Programs > Windows
Explorer
When the Windows Explorer appears, you can drag the data you would like to
record into the Nero Express layout.
Option Three
- Add data using My Computer - please click the icon. From
this window, you can drag and drop your files into the Nero Express layout.
Once all your files have been added, click “Next” to prepare your disc for burning.
Step 3: Please make your final settings before burning your disc.
Current Recorder – The supported burners you have connected to your PC will be
displayed and the Image Recorder if you chose to save to your hard drive.
Disc Name – Select a title for your disc.
Writing Speed – Select the speed in which you would like to burn.
Nero Express Music • 51
Number Of Copies – Select the number of copies you would like to burn.
If you are having trouble burning your disc, please refer to Chapter 'Technical
Support' for F.A.Q. information and technical support.
F.Y.I.! The WMA plugin will install WMA support within Nero 5.5. To install,
just download and execute the file.
Step 4: Ready to record? Click the “Burn” button and you are on your way to
recording your first data (WMA) disc! As you are burning, you will receive a status
window of the recording process.
Step 5: When it is completed, you will be notified that the burn process has
completed successfully.
Nero Express Music • 52
Step 6: When you click “OK” after the successful recording, you will be returned
back to the recording window. Please click “Next” move forward to the following
window.
If you would like to burn the same project again, start another project, make labels,
or add more data to your current disc it can be done from this window.
Nero Express Music • 53
5.6 For Advanced Users
5.6.1 Image Recorder
For details about how to create an image file, please see the Nero manual.
Enable Image Recorder for all supported recorder formats – When checked,
this will enable the Image recorder to be seen for all supported formats in the main
window.
Nero Express Music • 54
Current Recorder – When the “Image Recorder” has been selected for your audio
project, you will have two new additional options.
Title (CD-Text) – Select a title for your disc. It will appear on your LCD screen of
your home or car stereo provided that it supports the CD-Text function. Not all
players do!
Artist (CD-Text) – Select an artist name for your disc. It will appear on your LCD
screen of your home or car stereo provided that it supports the CD-Text function.
Number of copies – Select the number of disc copies you would like to make
5.6.2 Audio Properties
Normalize Audio files – Equalize levels of all the all audio tracks (Volume etc.).
No pause between tracks - When applied, all the audio tracks that will be burned
to disc will no longer have the two second gap between each song.
“Properties” button. You will be able to see the resources of each audio file and
have the capabilities to change and edit the track.
5.6.2.1 Track Properties Tab
You will be able to see the basic track information and also edit the properties of
your audio files.
Select your music track in the audio layout then click the
Nero Express Music • 55
File: Name of the MP3 file
Frequency: Stereo requirements for audio
Channels: Stereo requirements for audio
Resolution: Stereo requirements for audio
Title (CD-Text): The name of your song and the artist will be displayed on the LCD
panel of your stereo. Please make sure your equipment supports CD-Text.
Artist: Here you can enter the name of the artist for the song.
Pause: You can set the pause in-between each song by seconds or frames.
International Standard Recording Code (ISRC): An international identification
code for music, which was developed for identifying sound and music video
recordings.
Protection: When applied, you will add protection to your disc, so that it may not
be copied in the future.
Crossfade with previous track: When applied, this feature will blend the audio
tracks together. You can specify the amount of seconds you would like to blend inbetween each track
5.6.2.2 CD EXTRA tab
All information pertaining to the music track is defined in this window including the
language preferences.
Nero Express Music • 56
5.6.2.3 Indexes, Limits, Split Tab
Positions: Defines the start and end of your music track.
New Index: You are able to create a new index within your song. With this you can
then skip through the indexes with your audio player to find the particular audio
area you are looking for. Select an area in your song then click “New Index”.
Define a place in the audio track and click your mouse there. Click the “New index”
button and a marker will be place there to mark the spot. If you want to be
extremely accurate, you can use the “Zoom In” button to view the tracks more
closely.
Split: This function will divide the song into the areas which you specified. Select
an area in the song and click “Split”. As an example, if you have one large audio
file of a live concert in which they play 12 songs and you would like to split the
audio into 12 tracks, you would use this function. You can then play the audio in a
Nero Express Music • 57
CD player and each track would be identified as a separate song so that you can
use the seek function to play each track without having to listen to the whole music
piece.
Define a place in the audio track and click your mouse there. Click the “Split”
button and a marker will be place there to mark the spot. If you would like to be
extremely accurate, you can use the “Zoom In” button to view the tracks more
closely.
Play: To play the song in its entirety or a selected portion by highlighting the area,
click “Play”.
Edit: You are able to edit the index or split markers by minutes, seconds, or
frames.
Select the marker and click “Edit”.
Nero Express Music • 58
You can edit the actual minutes, seconds, and frames of the audio file.
Delete: Delete the index or split markers that you have made by selecting the
index or split marker and clicking “Delete”.
Zoom In: View your song at close range.
Zoom Out: Have an overall large picture of your song.
Full View: View your song in full.
5.6.2.4 Filters Tab
You can change the audio effects by selecting one or more of the checkboxes
below. After selecting your filters, you can test the effects by choosing “Test
selected filters”.
Normalize: This filter may be used to set the volume of a track to a standard
volume. It may be useful to adjust the volumes of several tracks that were read
from different sound input devices.
DeClick: This filter can be used to remove click/pop/crackle sounds like those that
are caused by old scratched LP’s.
Nero Express Music • 59
Hiss Reduction: This filter reduces the hiss level of a given sound. It will remove
all audio in all frequencies that are below a certain threshold (hiss level). If audio
has a constant background hiss then it can be “noise gated” or removed
completely.
Fade In: this filter will gradually fade and blend tracks from silence to full volume.
It’s especially useful to shorten tracks. You will also need to edit the track limits
property page to shorten the track.
Fade Out: This filter will gradually fade out tracks from full volume to silence. It’s
especially useful to shorten tracks. You will also need to edit the track limits
property page to shorten the track.
Stereo Widening: This filter allows you to enhance or reduce the stereo effect of
an audio track. The filter will only have an effect if the original track is already
recorded in stereo. It will leave mono tracks unchanged.
Karaoke: This filter can be used to eliminate the vocals of a song. It works by
removing those parts of the song that are equal on both stereo channels.
Echo: This filter allows you to add an echo effect to the audio track.
Equalizer: This filter allows you to change the frequency, gain, bass, and treble in
your audio track.
Nero Express Music • 60
6 Video/Pictures
6.1 Video/Pictures
Video
Get those home movies ready! You can now take your movies or video clips and
store them to CD in Video or Super Video CD format. Super Video CD or (SVCD)
is very similar to a video CD, however, this format uses a compression standard
called MPEG to store the audio and data. VCD’s can be played on most home
video players that support this format and CD-ROM and DVD-ROM players with
appropriate software. SVCD discs can be played on DVD players, PC’s with DVDROMS or a CD-ROM drive with software which allows this type of video format to
be seen.
6.2 Creating your first video disc
Step 1: From the project selection page, select Video > Video CD.
Nero Express Video/Pictures • 61
Step 2: From this next window, you are now ready to start adding data to your
layout for recording to disc.
Step 3: There are three very simple ways to add data to the layout window to make
this process quick and easy.
Option One
- Click the button to select the files you would like to
burn. A window will appear that looks very similar to Windows Explorer and from
here, you are able to choose the files you would like to record and save on disc.
Once you have selected your file(s), please click Add.
Option Two
- Add data using Windows Explorer - please go to the Start button in
the corner of your screen All Programs > Accessories > Windows Explorer.
F.Y.I.! Some operating systems will have Start > Programs > Windows
Explorer
When the Windows Explorer appears, you can drag the data you would like to
record into the Nero Express layout.
Option Three
- Add data using My Computer - please click the icon. From
this window, you can drag and drop your files into the Nero Express layout.
Nero Express Video/Pictures • 62
Step 4: Once all your files have been added, click “Next” to prepare your disc for
the layout.
In the My Video CD (VCD) menu, you can change the look of the menu by clicking
on the layout, background, and text buttons.
Layout – You are able to change the thumbnails and add or remove the header
and footer.
Nero Express Video/Pictures • 63
Background – Add an image to your background or color. You can also change
the background mode so that you can scale to fit, center, etc…
Text – Change the font style, size, and enter footer and header text.
Show full screen menu – When applied, you will enlarge the screen to full size.
Set as default – Keep the settings you have just made as default if you like the
layout you have created.
Nero Express Video/Pictures • 64
Step 5: Please make your final settings before burning your disc.
If you are having trouble burning your disc, please refer to Chapter 'Technical
Support' for F.A.Q. information and technical support.
Step 6: Ready to record? Click the “Burn” button and you are on your way to
recording your first data (VCD) disc! As you are burning, you will receive a status
window of the recording process.
Nero Express Video/Pictures • 65
Step 7: When it is completed, you will be notified that the burn process has
completed successfully.
Step 8: If you click OK after the successful recording, you will be returned back to
the recording window. Please click “Next” to move forward to the following window.
If you would like to burn the same project again, start another project, make labels,
or add more data to your current disc it can be done from this window.
Nero Express Video/Pictures • 66
6.3 Creating your first super video disc
Step 1: From the project selection page, select Video Pictures > Super Video CD
(SVCD)
Step 2: From this next window, you are now ready to start adding data to your
layout for recording to disc.
Nero Express Video/Pictures • 67
Step 3: There are three very simple ways to add data to the layout window to make
this process quick and easy.
Option One
- Click the button to select the files you would like to
burn. A window will appear that looks very similar to Windows Explorer and from
here, you are able to choose the files you would like to record and save on disc.
Once you have selected your file(s), please click Add.
Option Two
- Add data using Windows Explorer - please go to the Start button in
the corner of your screen All Programs > Accessories > Windows Explorer.
F.Y.I.! Some operating systems will have Start > Programs > Windows
Explorer
When the Windows Explorer appears, you can drag the data you would like to
record into the Nero Express layout.
Option Three
- Add data using My Computer - please click the icon. From
this window, you can drag and drop your files into the Nero Express layout.
Step 4: Once all your files have been added, click “Next” to prepare your disc for
the layout.
In the My Super Video CD (SVCD) menu, you can change the look of the menu by
clicking on the layout, background, and text buttons.
Nero Express Video/Pictures • 68
Layout – You are able to change the thumbnails and add or remove the header
and footer.
Background – Add an image to your background or color. You can also change
the background mode so that you can scale to fit, center, etc…
Text – Change the font style, size, and enter footer and header text.
Nero Express Video/Pictures • 69
Show full screen menu – When checked, you will enlarge the screen to full size.
Set as default – Keep the settings you have just made as default if you like the
layout you have created.
Step 5: Please make your final settings before burning your disc.
If you are having trouble burning your disc, please refer to Chapter 'Technical
Support' for F.A.Q. information and technical support.
Nero Express Video/Pictures • 70
Step 6: Ready to record? Click the “Burn” button and you are on your way to
recording your first data (SVCD) disc! As you are burning, you will receive a status
window of the recording process.
Step 7: When it is completed, you will be notified that the burn process has
completed successfully.
Nero Express Video/Pictures • 71
Step 8: If you click OK after the successful recording, you will be returned back to
the recording window. Please click “Next” to move forward to the following window.
If you would like to burn the same project again, start another project, make labels,
or add more data to your current disc it can be done from this window.
6.4 Advanced Users
6.4.1 Video and Super Video Properties
You are able to change the video parameters within the Video and Super Video
layout. When in the layout window, select the file and click “Properties”.
Nero Express Video/Pictures • 72
Scaling method – When scaling the size of your video, you will have the choice of
Maximize, Scale and clip, or Scale and fit.
Pause after Track – After each picture clip or video, you have the option to replay
infinitely until the user stops the program or sets the pause after the track by
seconds.
Select picture to use as thumbnail – The slider can move your video frame by
frame. Select the frame in which you would like to represent your thumbnail.
Title – Select the title for your video
Nero Express Video/Pictures • 73
7 DVD
7.1 DVD
DVD Disc
If you have a supported DVD recorder (Please visit www.nero.com
currently supported DVD+R/+RW/-R/-RW recorders) you can burn DVD discs in
the same way you would burn CDs. Not all the various formats that exist for CD
have their counterpart on DVD. Therefore, once you have chosen to record a DVD,
the “Project Selection” page will look slightly different. You have the choice of
burning a data disc, an MP3 audio disc, an WMA audio disc, burning existing DVDVideo files to DVD-Video, copying an entire DVD, opening a previously saved
project or burning a previously created DVD disc image.
Please note that to make a DVD-Video title from video files (such as AVI, etc), you
must use a DVD authoring tool such as NeroVision Express. In Nero Express
you can only files which already exist in the format and file structure required by
the Video-DVD standard.
the list of
F.Y.I.! It is not possible to read or copy copy-protected DVD’s or CD’s with
Nero Express.
Nero Express DVD • 74
7.2 Selecting your recorder
If your DVD recorder is supported and has been detected, simply seclect it from
the “Which recorder would you like to use?” drop-down box. Some DVD recorders
can also record CDs. These so-called “combo recorders” will be listed twice in the
drop-down menu, followed by the extension “CD-R/RW” and “DVD”. To use the
recorder to burn DVD discs, select the entry with the “DVD” extension.
If you do not have a DVD recorder available, you have the possibility to burn DVD
disc images using the DVD Image Recorder. These images can later be opened in
Nero Express and burnt to DVD when a DVD-recorder is available.
If the Image Recorder (DVD) is not available to you as an option, most likely the
feature has not been activated.
Please click on the “More” button then “Configure”.
Nero Express DVD • 75
In the Expert Features tab, near the bottom, you will see an option called “Enable
Image Recorder for all supported recorder formats”. Please check this box and the
Image Recorder (DVD) option will appear at your “Start” screen.
7.3 Creating your first DVD disc
To make data or music discs, or to copy an entire DVD disc, the steps are the the
same as with CD’s. Please refer to the relevant sections in the user’s guide. Only
the “DVD-Video files” project is a little different and will be explained in detail
below.
Nero Express DVD • 76
7.4 Creating a DVD-Video disc from DVD-Video files
Once the DVD recorder or DVD Image Recorder has been selected, the option to
burn DVD files will appear in your “Start” menu.
Step 1: From the project selection page, select DVD-Video files
Step 2: From this next window, you are now ready to start adding existing DVD-
Video files with extensions such as .VOB, .IFO, .BUP. To ensure a proper
functioning of the DVD-Video disc, it is best to add all the files of the VIDEO_TS
folder.
Nero Express DVD • 77
Step 3: When you are ready, click “Next” to proceed to the next window to start the
burn process.
In the “Final Burn Settings” window, you will only have the option to change back
and forth between your DVD burner (if you have one available to you) and the DVD
Image Recorder and to label your disc under “Disc Name”. All other options will be
grayed out and not available to you.
Step 4: When ready, click “Burn”!
Nero Express DVD • 78
8 Copy Entire Disc
8.1 Copy Entire Disc
Copy Entire Disc
Copy the complete contents of an entire disc to a blank CD bit by bit. If you are
backing up a disc or making a copy for your personal use, this feature allows you
to make an efficient exact copy.
Step 1: From the project selection page, select Copy entire disc
Nero Express Copy Entire Disc • 79
Step 2: From this next window, you are now ready to start the process of copying
from disc to disc.
If you have more than one CD-ROM or CD-R/RW drive in your PC, please use the
drop down box to select the drive(s) you would prefer to use.
Source Drive – This is the drive in which it contains the disc you would like copied.
Destination drive – This drive will contain the blank disc which you will be burning
to.
Quick Copy – Select this option if you would like to copy directly from the source
to the destination drive. No space will be used on your hard disk.
If you are having trouble burning your disc, please refer to Chapter 'Technical
Support' for F.A.Q. information and technical support.
Nero Express Copy Entire Disc • 80
If you have selected “Copy entire disc” as your project, you will have this option
when selecting the “More” button.
You will have the burn options for your disc.
Determine maximum speed – When checked, the software will determine the
safest maximum speed for burning your disc.
Simulation – When checked, the software will simulate an actual burn to disc
without actually writing to it.
Write – When checked, the software will immediately burn to disc.
When you are ready to burn and click the “More” button at the “Final Burn Settings”
window, another window will appear:
Nero Express Copy Entire Disc • 81
Step 3: Ready to record? Click the “Burn” button and you are on your way to
recording your disc! The source disc will first be analyzed to check for copyrights
and errors on the disc. As you are burning, you will receive a status window of the
recording process.
Step 4: When it is completed, you will be notified that the burn process has
completed successfully.
Nero Express Copy Entire Disc • 82
Step 5: When you click OK after the successful recording, you will be returned
back to the recording window. Please click “Next” to move forward to the following
window.
If you would like to burn the same project again, start another project, make labels,
or add more data to your current disc it can be done from this window.
Nero Express Copy Entire Disc • 83
9 Disc Image or Saved Project
9.1 Disc Image or Saved Project
Disc Image or Saved Project
If you are unable to finish your project or would like to save it to record multiple
copies, you can save your work and open at a later time.
You can also save to Disc Image if you are having problems with corrupted source
discs/disks or performance problems with your PC. Disc Image is the safest way to
record your data to disc.
9.2 Creating a disc from a disc image
Step 1: From the project selection page, select Disc image of saved project
Nero Express Disc Image or Saved Project • 84
Step 2: From this next window, you are now ready to retrieve your disc image or
saved project.
Step 3: Please make your final settings before burning your disc.
For additional Burn Settings information, please refer to Chapter 'Preferences'.
If you are having trouble burning your disc, please refer to Chapter 'Technical
Support' for F.A.Q. information and technical support.
Nero Express Disc Image or Saved Project • 85
Step 4: Ready to record? Click the “Burn” button and you are on your way to
recording your first data disc! (Disc image or saved project) As you are burning,
you will receive a status window of the recording process.
Step 5: When it is completed, you will be notified that the burn process has
completed successfully.
Nero Express Disc Image or Saved Project • 86
Step 6: If you click OK after the successful recording, you will be returned back to
the recording window. Please click “Next” to move forward to the following
window.
If you would like to burn the same project again, start another project, make labels,
or add more data to your current disc it can be done from this window.
Nero Express Disc Image or Saved Project • 87
9.3 Creating a disc from a saved project
Step 1: From the project selection page, select Disc image of saved project
Step 2: From this next window, you are now ready to retrieve your disc image or
saved project.
Select the file that you would like to burn and click “Open”.
Nero Express Disc Image or Saved Project • 88
Step 3: The files from the saved disc image or save project will be displayed and
ready for burning.
Step 4: Once you are ready, click “Next” to prepare your disc for burning.
Please make your final settings before burning your disc.
For additional Burn Settings information, please refer to Chapter 'Preferences'.
If you are having trouble burning your disc, please refer to Chapter 'Technical
Support' for F.A.Q. information and technical support.
Nero Express Disc Image or Saved Project • 89
Step 5: Ready to record? Click the “Burn” button and you are on your way to
recording your first data disc! (Disc image or saved project) As you are burning,
you will receive a status window of the recording process.
Step 6: When it is completed, you will be notified that the burn process has
completed successfully.
Nero Express Disc Image or Saved Project • 90
Step 7: If you click OK after the successful recording, you will be returned back to
the recording window. Please click “Next” to move forward to the following
window.
If you would like to burn the same project again, start another project, make labels,
or add more data to your current disc it can be done from this window.
Nero Express Disc Image or Saved Project • 91
10 Preferences
10.1 Preferences
In Nero Express you have the possibility to change many settings in order to
configure your software for optimal use. When you click on “More” then the
“Configure” button, the “Preferences” window will appear. The settings are grouped
in various tabs to make it easier for you to make the required changes.
10.2 General Tab
Check for correct disc format before burning – When checked, the software will
check to make sure that the disc you are using is in the correct format and suitable
for burning.
Nero Express Preferences • 92
Check for Joliet filenames before burning – Joliet filename standard supports up to
64 characters in a filename not including the extension (the characters after the “.”
in a filename). When checked, the software will check for this standard before
burning.
Show compilation size in the Nero status bar – When creating your compilation,
you will have a status bar at the bottom of your window to show you just how much
space you will be using on the blank disc.
Status Bar – This feature is very useful especially if you are creating a full disc of
an audio compilation. It works like a meter as you add your tracks or data.
Depending on the disc size you are using as the source, it could be 74 or 80
minutes. When your compilation reaches over 74 minutes, you can set the yellow
marker to show exactly when your compilation reaches over this target. When you
reach over 80 minutes, you can set the red marker to alert you that your
compilation is over the disc limit.
Yellow marker (min, sec, frm) – This can be set for a 74 minute disc by minute,
seconds, and frame.
Red marker (min, sec, frm) - This can be set for a 74 minute disc by minute,
seconds, and frame.
Horizontal scaling - You can select the drop down box to specify the type of media
that you are using. It will then scale the meter to the size of the media. If you select
“automatic”, the software will select for you.
Plugin Directory – If you have any plugins (software file that would enhance or fix
your program) for your Nero software, it would be located in this directory.
Plugin lookup – When you click this button, it will look up all the plugins associated
with your software.
Unsupported plugins – When you click this button, it will locate all the plugins that
are not supported by your software. Please go to www.nero.com
for additional
upgrade options if necessary.
Nero Express Preferences • 93
10.3 Cache Tab
Path for cache – You can select the directory and path for the cache. This is
important since you will be using this space as a temporary cache when burning
large files or full discs. It can help prevent buffer underruns.
Test all drive speeds – You can test all hard drive speeds on your system for
performance.
Minimum disc space reserved – Reserve the minimum disc space for your cache.
Nero Express Preferences • 94
10.4 Language Tab
Selecting your language - Select the language of choice in the box above. If your
system only supports one language, it will be selected as default.
For CD-Extra discs, you can add pictures and additional information that are
language specific.
Choose Font – Select the font that you would like to appear on your layout screen.
If you should have any suggestions on how to improve the translations in this
software, please contact us at translations@nero.com
all suggestions and comments.
. We would be happy to take
Nero Express Preferences • 95
10.5 Sounds Tab
If you would like to change the sounds in your Nero software when a certain
function has been performed such as Burn Process Successful/Unsuccessful or
Waiting For A Disc, you can select one of the many sounds in the Nero directory or
choose your own. Select the “Browse” button for the appropriate category you
would like to change and find the sound you prefer.
Nero Express Preferences • 96
10.6 Expert Features Tab
Don’t eject the disc after the burn is complete – When checked, the disc that was
written will not be ejected after the burn is complete.
Enable overburn ‘disc at once’ burning – All blank discs have a little bit more space
that is usually not used. When written to this space, it is called “overburning”. This
feature is popular among those who are trying to get as much as possible on the
disc. Disc At Once will be enabled since the entire disc needs to be written in one
session.
Since maximum overburn CD capacity cannot be determined automatically, the
user must estimate the amount as best as possible. You can try adding a few
minutes to the capacity that is mentioned on your blank disc.
F.Y.I. Warning! Since normal CD-R’s are not designed for this amount of
data nor made for this purpose, there may be errors at the end of the disc. You
could also possibly damage your burner. Please use this option at your own risk!
Clear archive bits of written files during ISO refresh – When checked, this option
will clear the archive bits that were written during the ISO refresh.
Nero Express Preferences • 97
Enable Image Recorder for all supported recorder formats – When checked, this
will enable the Image recorder to be seen for all supported formats in the main
window.
10.7 Database Tab
Nero Express Preferences • 98
Program database path – The program has set a database path in which your CD
titles and songs will be located.
User database path – This is a user defined database path in which the user’s CD
titles and songs will be located.
Read Server (http) – If you would like to use the free internet CD database, this
option can be checked. When you insert your music CD into the drive, you can
search the internet through FreeDB for the song names and CD titles. This will
save you countless hours entering in your own name.
Address – The web address in which FreeDB is located. This has been set for you
by default.
Port – The port address in which FreeDB is located. This has been set for you by
default.
Proxy – If you are behind a firewall and unable to access the FreeDB database,
you can key in the proxy information manually.
Submit E-Mail address – If you would like to submit your CD Titles or song names
to FreeDB that are not in their database, this address has been provided to send
the information.
Your E-Mail address - If you would like to submit your E-Mail address to the
FreeDB database, you can enter this information here.
SMPT Server – Your server address, in which the CD title and song names are
located.
Application Name – The application you are using to submit information to FreeDB
and the version number.
Open the database during ‘Save track’ – The database will open when the ‘Save
track’ option is open.
Open the database during ‘CD copy’ - The database will open when the ‘CD Copy’
option is open.
Open the database during ‘*.cda drag&drop’ – When you drag and drop audio files
into the Nero window, the database window will open.
Nero Express Preferences • 99
10.8 Ultrabuffer Tab
Automatic configuration – The amount of memory that Nero Express will use as
RAM buffer will be set automatically for you. This secondary buffer in addition to
your recorder’s physical buffer will make burn process more reliable
Manual configuration - This allows you to set the amount of memory that Nero
Express will use as RAM buffer. This secondary buffer in addition to your
recorder’s physical buffer will make burn process more reliable
Data buffer size – When you select the “Manual configuration” option, this option
will become available for you to set the amount of memory.
Nero Express Preferences • 100
Loading...