Agusta MV F4 750 Service Manual 101-120

- 101 -

MAINTENANCE 6

In the State of California only, emission related warranted parts are specifically defined by the state's
Emission Warranty Parts List. These warranted parts are: carburetor and internal parts; intake manifold;
fuel tank; fuel injection system; spark advance mechanism; crankcase breather; air cutoff valves; fuel
tank cap for evaporative emission controlled vehicles; oil filler cap; pressure control valve; fuel/vapour
separator; canister; igniters; breaker governors; ignition coils; ignition wires; ignition points; condensers,
and spark plugs if failure occurs prior to the first scheduled replacement; and hoses, clamps, fittings and
tubing used directly in these parts. Since emission related parts may vary from model to model, certain
models may not contain all of these parts and certain models may contain functionally equivalent parts.
In the State of California only, Emission Control System emergency repairs, as provided for in the
California Administrative Code, may be performed by other than an authorized MV Agusta dealer. An
emergency situation occurs when authorized MV Agusta dealer is not reasonably available, a part is not
available within 30 days, or a repair is not complete within 30 days. Any replacement part can be used
in an emergency repair. MV Agusta will reimburse the owner for the expenses, including diagnosis, not
exceeding MV Agusta's suggested retail price for all warranted parts replaced and labour charges based
on MV Agusta's recommended time allowance for the warranty repair and the geographically appropri­ate hourly labour rate. The owner may be required to keep receipts and failed parts in order to receive
compensation.

6.15.2 LIMITATIONS

This Emission Control System warranty shall not cover any of the following:
A. Repair or replacement required as a result of

(1) accident

6

- 102 -

MAINTENANCE 6

(2) misuse,
(3) repairs improperly performed or replacements improperly installed
(4) use of replacement parts or accessories not conforming to MV Agusta specifications which

adversely affect performance and/or

(5) use in competitive racing or related events.

B. Inspections, replacement of parts and other services and adjustments needed for required mainte-

nance.

C. Any motorcycle on which the odometer mileage has been changed so that actual mileage cannot be

readily determined.

6.15.3 LIMITED LIABILITY

A. The liability of MV Agusta under this Emission Control System Warranty is limited solely to the rem-

edying of defects in material or workmanship by an authorized MV Agusta motorcycle dealer at its
place of business during customary business hours. This warranty does not cover inconvenience or
loss of use of the motorcycle or transportation of the motorcycle to or from the MV Agusta dealer. MV
Agusta shall not be liable for any other expenses, loss or damage, whether direct, incidental, conse­quential or exemplary arising in connection with the sale or use of or inability to use the MV Agusta
motorcycle for any purpose. Some states do not allow the exclusion or limitation of any incidental or
consequential damages, so the above limitations may not apply to you.

B. No express emission control system warranty is given by MV Agusta except as specifically set forth

herein. Any emission control system warranty implied by law, including any warranty of mer­chantability or fitness for a particular purpose, is limited to the express emission control system war-

6

- 103 -

MAINTENANCE 6

ranty terms stated in this warranty.
The foregoing statements of warranty are exclusive and in lieu of all other remedies. Some states do
not allow limitations on how long an implied warranty lasts so the above limitations may not apply to
you.

C. No dealer is authorized to modify this MV Agusta Limited Emission Control System Warranty.

6.15.4 LEGAL RIGHTS

This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
This warranty is in addition to the MV Agusta limited motorcycle warranty.

6.15.5 ADDITIONAL INFORMATION

Any replacement part that is equivalent in performance and durability may be used in the performance
of any maintenance or repairs. However, MV Agusta is not liable for these parts. The owner is respon­sible for the performance of all required maintenance. Such maintenance may be performed at a service
establishment or by any individual. The warranty period begins on the date the motorcycle is delivered
to an ultimate purchaser.
MV Agusta Motor S.p.A. Cagiva U.S.A.
Via G. Macchi, 144 1901 Davisville Road
21100 Varese, Italy Willow Grove, PA 19090-4193

6

- 104 -

MAINTENANCE 6

6

6.16 Replacing parts - General information

The replacement of the fuses (except for the bat­tery recharge fuse) and the light bulbs (excepting
the front parking light bulbs) can be carried out by
the user according to the indications provided
below.

Battery recharge fuse - Replacement (§

6.16.1)

Service fuses - Replacement (§ 6.16.1)

Low beam bulb - Replacement
(§6.16.2.)
High beam bulb - Replacement
(§6.16.3.)
Front parking light bulbs ­Replacement
Front turn indicator bulbs - Replacement (§

6.16.4)
Rear turn indicator bulbs - Replacement (§

6.16.5)
Rear light and brake light bulb - Replacement
(§ 6.16.6)

Number-plate light bulb - Replacement (§ 6.16.7)

6.16.1.Replacing the fuses

The recharge fuse is located on the left side of

the motorcycle, in the position shown in the figure.

Spare fuse

Fuse

- 105 -

MAINTENANCE 6

6

The service fuses are located on the right side.

To expose them, remove the side fairing (see §

6.4).
Remove the fuse box cover.

Replace the blown fuse and refit the cover. To

identify the position and function of the fuses,
refer to the information shown on the adhesive
label and in the enclosed electrical diagram. The
reference letters in the figure correspond to those
shown in the diagram.
Remember that the tool bag contains two spare
fuses.

ACEG

BDFH

- 106 -

MAINTENANCE 6

6

6.16.2 Replacing the low beam bulb

Remove the cover.

Release the retaining spring.
Extract the bulb.
Detach the connector.

Caution: Do not touch the bulb glass with
bare hands. If necessary, clean the bulb with
a degreasing product.

Attach the connector.
Fit the new bulb.
Reattach the spring.
Replace the cover.