Aguilar Fuzzistor User Manual

FUZZISTOR

TM

The Fuzzistor™ provides classic silicon transistor distortion with
complete control over the BLEND of the clean and Fuzz sound, amount
of FUZZ from subtle to crushing, LEVEL for gain matching, and TILT EQ
that changes the harmonic structure of the Fuzz from booming to
gnarly.

Features:

• Silicon transistor distortion

• Intuitive four knob control layout

• Gig-saver bypass (signal passes even if your battery dies)

• Powered by a nine-volt battery or optional universal power

supply

• Heavy duty steel construction

• Three-year limited warranty

Owner’s Manual

Manual Version 1.1

I. Functions

A. Top Panel:

BLEND: Controls the mix ratio between clean and distorted signals.

When the knob is set to the 12:00 position, the two signals are mixed at a 50:50
ratio.

When the BLEND knob is turned counterclockwise the mix ratio favors the clean
signal. When this knob is turned clockwise the mix ratio is reversed and favors the
distorted signal.

LEVEL: Controls the overall output level.

TONE: Controls the tone of the distorted signal.

FUZZ: Changes the character of the distorted signal. Turning the knob clockwise will

intensify the distortion, enriching the harmonic content of the sound.

ENGAGE: Toggles between on and off. The blue LED indicates that the effect is on.

B. Side Panel:

IN: ¼” input

DC IN: This is a standard 2.1mm DC jack. The center terminal polarity is negative.

OUT: ¼” output