Aguilar Chorusaurus User Manual

CHORUSAURUS

®

Combining analog bucket-brigade technology with the precision and
flexibility of modern circuits, the Chorusaurus

®

produces lush, organic
chorusing effects that won’t compromise your low end. Using intuitive
and flexible controls, bassists can dial in that perfect chorus effect.

Features:

• Uses analog bucket-brigade technology

• Independent adjustment of all chorus effect parameters

• Stereo or Mono output

• Gig-saver bypass (signal passes even if your battery dies)

• Heavy duty steel construction

• Three-year limited warranty

• Power: 9 volt battery or optional power supply

Owner’s Manual

Manual Version 1.1

I. Functions

A. Top Panel:

BLEND: Controls the mix ratio between clean and modulated signal.

The most dramatic chorusing effect is achieved when the knob is set to the 12:00
position (50:50 ratio).

When this knob is fully counterclockwise the mix ratio is 90:10 in favor of clean
signal. When this knob is fully clockwise the mix ratio is reversed and favors the
modulated signal 10:90.

RATE: Controls the speed of modulation.

INTENSITY: Controls the intensity of the modulation. Higher intensity produces

more dramatic chorusing effect.

WIDTH: Sets the range for the INTENSITY to work within. Turning WIDTH
clockwise will broaden the range, allowing more intense effect.

ENGAGE: Toggles between on and off. The blue LED indicates that the effect is on.

B. Side Panel:

IN: ¼” input

DC IN: This is a standard 2.1mm DC jack. The center terminal polarity is negative.

OUT: ¼” output

• For mono output use a standard ¼” cable to your amplifier.

• For stereo operation with two amplifiers use a ¼” Y adapter cable

with one ¼” TRS plug to two ¼” TS jacks.