Aguilar AG 500SC-112C, AG 500SC-212C Owners Manual
Aguilar Amplification’s
AG 500SC-112C
&
AG 500SC-212C
Owners Manual
Nov 2004, Manual Version 1.3
1.
Table of Contents
I. Getting Started page 3.
A. Safety Instructions
B. Manual Conventions
C. Basic Setup
D. Protection Modes
II. Features and Functions page 5.
A. Front Panel
B. Rear Panel
C. Cabinet
III. Warranty Information page 7.
2.
I. Getting Started
A. Safety Instructions
Please follow these guidelines:
A) Vents are provided for heat dissipation at the rear of the
amplifier. Maintain at least a 1” space around these vents to
provide sufficient ventilation. If you decide to rack mount the
amplifier make sure you do not block the vents.
B) Keep all sources of fire, such as lighted candles, away from the
amplifier.
C) This product is approved for use in any climate.
D) Do not expose the product to dripping or splashing. Do not
place objects filled with fluid on the amplifier.
E) Amplifier must be connected to a mains socket outlet with a
protective earthing connection.
F) The appliance coupler (AC cord) is the disconnect device. The
disconnect device shall remain readily operable at all times.
B. Manual Conventions
In this manual, words that appear in
controls on the AG 500SC.
C. Basic Setup
Plug in your instrument and the footswitch. Your combo by itself is 8
ohms and 250 watts of power. You can add an 8 ohm extension speaker
and you will have a 500 watt bass rig.
With the
Master
volumes down, turn on your amplifier. Adjust as follows:
italics
represent actual physical
3.
Loading...