Aguilar AG 500SC Owners Manual

AG 500SC

Owners Manual

Manual Version 1.7

1.

Table of Contents

I. Getting Started page 3.

A. Safety Instructions
B. Manual Conventions
C. Basic Setup
D. Protection Modes

II. Features and Functions page 5.

A. Front Panel
B. Rear Panel
C. Cabinet

III. Warranty Information page 7.

2.

I. Getting Started

A. Safety Instructions

Please follow these guidelines:

A) Vents are provided for heat dissipation at the rear of the

amplifier. Maintain at least a 1” space around these vents to
provide sufficient ventilation. If you decide to rack mount the
amplifier make sure you do not block the vents.

B) Keep all sources of fire, such as lighted candles, away from the

amplifier.

C) This product is approved for use in any climate.

D) Do not expose the product to dripping or splashing. Do not

place objects filled with fluid on the amplifier.

E) Amplifier must be connected to a mains socket outlet with a

protective earthing connection.

F) The appliance coupler (AC cord) is the disconnect device. The

disconnect device shall remain readily operable at all times.

B. Manual Conventions

In this manual, words that appear in

controls on the AG 500SC.

C. Basic Setup

Plug in your instrument. The amount of power this amplifier will produce
varies with the impedance rating of your cabinets.

One 8 ohm cabinet – 250 watts
Two 8 ohm cabinets – 500 watts
One 4 ohm cabinet – 500 watts

With the

Master

volumes down, turn on your amplifier. Adjust as follows:

italics

represent actual physical

3.