attach a garden hose to the fi ll/drain hole when
fi lling. Dangerous pressure build up could occur inside
2. Do not fi ll roller to maximum weight without checking
capability of vehicle to safely pull and stop.
3. Never use roller up and down hills; always work across
4. Use caution when turning, slowing or stopping.
5. Always drain roller to keep from freezing.
24" Dia. x 48" Wide Welded Steel
Std. Pin Type - 1/2" Hole
Up to 910 Lbs. Filled with Water
(Note: May be fi lled with sand)
5 43632 2 Bearing, Plastic
6 43528 2 Flat Washer, 1"
7 46782 2 Hex Bolt, 5/16-18 x 3"
8 43224 2 Hex Bolt, 5/16-18 x 2-1/4"
9 43084 2 Hex Bolt, 5/16-18 x 1-3/4"
10 47810 6 Hex Lock Nut, 5/16-18
11 49467 2 Plug, Lawn Roller
12 43501 2 Cotter Pin, 5/32" x 1-1/2"
14 43343 1 Hair Cotter Pin 1/8"
Ref. Part Qty. Description
Ref. Part Qty. Description
that bearing fl ange is against outside of hitch tube. (You
carefully tap with a hammer.)
2. Place hitch tubes (Ref. 3) onto both ends of roller shaft.
Assemble a fl at washer (Ref. 6) onto each end of roller
shaft and secure with two cotter pins (Ref. 12).
3. Assemble scraper bar (Ref. 2) to hitch tubes (Ref. 3)
4. Assemble ends of hitch tubes (Ref. 3) together using
two hex bolts (Ref. 7) and hex lock nuts (Ref. 10).
5. Assemble hitch brackets (Ref. 4) to hitch tubes (Ref. 3)
bolts and nuts starting with scraper bar (Ref.
2), then ends of hitch tubes (Ref. 3), and fi nally hitch
7. Install hitch pin (Ref. 13) through hitch brackets (Ref. 4)
and secure with hair cotter pin (Ref. 14).
Adjust plug (Ref. 11) size by twisting handle. Lock a plug
1
6
5
9
3
10
4
8
10
7
3
9
5
6
11
2
10
10
11
12
12
13
14
ADJUST SIZE
the fastest way to purchase parts
www.speedepart.com