Menu button/Back
VOL-
Micro SD card
Earphone Jack
Play/Pause/Power
On-off/Enter
VOL+
LCD
Previous/Move up/
Fast backward
Overview
Technical Specification
R2S USER MANUAL
Packaging contents:
.The player
Next/Move
down/Fast
forward
Micro-USB
Main Menu
Basic Operation
.USB cable
.User manual
Specification
Screen
0.8 inch 128*64 LCD display
Audio format
MP3/WMA/OGG/APE/FLAC/WAV/AAC-LC/A
CELP
Recording format
FM/MIC record and WAV
Battery
Li-polymer rechargeable 140mAh
FM frequency
87.0-108MHZ
Micro-SD card
Extend to 64GB
Micro-USB transfer
High speed USB 2.0
Power on and off
Hold button for 3 seconds to turn on/off the player.
Lock keys
Press both M and buttons at the same time to lock the screen.
Repeat to unlock.
Battery Charging
When the battery indicator on the screen, you must charge the device.
The device has two charge options:
a)You can charge the device via the USB connector.
b)You can also charge the device via a 5V 500mAh USB wall adapter
(not supplied)
Note:The charging time should not exceed 4 hours. It is recommended
to turn off the device before charging.
Hold button to turn on the player, click or to go to the
following menu, press to enter.
ICON
Main menu
Access to function
MUSIC
Listen to songs saved in SD card
MUSIC
RECORD
Record voice by the internal
microphone and playing recording files
FM RADIO
Listen to FM radio broadcast
FOLDER
Navigation by folders
SETTING
Change the system configuration
EBOOK
Read Ebook(only for TXT format)
Now Playing
Playing music or FM radio when it is
working on backstage.
Loading music
1. The player DO NOT has internal memory. Before using this player,
please prepare a Micro SD card with music files at first. Then connect
the digital audio player to a computer via a USB cable.
2. Once connected, the unit will show up on the connected computer
as if it were a connected USB thumb drive, external hard drive, or
memory card.
3. Drag and drop the desired audio files into the unit’s drive location
on the connected computer.
4. After the files are loaded onto the unit, right-click on the drive and
eject it from the computer, then disconnect the USB cable.
Play your music
Find icon, press to enter, click / to choose: “All songs”,
“Artists”, “Albums”, “Genres”, “Playlists” and “Update the card data”,
“Play music from”. Press to confirm your option and start to play
your music.
When the device is playing songs, long press M button to enter its
sub-menus, and press to enter the option you want.
Play mode
1. Repeat
Here appears 4 options,Repeat off, Repeat 1,and Repeat All and view
playing.
2. Shuffle
Choose on/off mode as you want.
3. Language learning
Here appears 3 options, Repeat mode, Relay times and Relay Interval.
Press to enter the option you want
Equalizer
Here are 7 equalizers for your option, Rock, Funk, Hip Hop, Jazz,
Classical,Techno and custom.
Add to playlist
There are 3 options prepared for you, including “Playlist on the go
[1]”, “Playlist on the go [2]” and “Playlist on the go [3]”, you can add
the song which is playing to any one of these three as you like.
Remove from playlist
You can remove the song which is playing to any one of these three
Playlist as you like.
To create playlists by yourself
There is a free program called Media Go. It's the easiest program to use
for transferring playlists to the AGPTek. . Just create your playlists in
Media Go and then right-click its name and select 'Add playlist to X :(
Which is your MP3 player's disk) '. (You can download it at
http://mediago.sony.com/chs/download).
Note: whenever at any interface, short press M to exit and back to
superior menu.
Delete
It will show” ...(song name)” delete? Press to choose yes to delete
this song.
Sleep timer
When playing time is reach sleep timer you set, the player will power
off automatically.
Bookmarks
It is marked by the stopping time as “hh:mm:ss”. So you can set the
stopping time before you add it for continues playing next time
conveniently.
FM RADIO
RECORDINGS
Maximum number of bookmarks supported by each audio file is 10.
You can also cover the previous bookmark with new bookmark, and
then the old one will be replaced by the new.
You can find the bookmarks you saved with the option “Go to
bookmark” under item “Bookmarks”, and you can delete them with
the option “Delete bookmark”.
Find the icon and press to enter voice recording. The following
list will show: Start Voice Recording, Recordings library, Storage,
Record Format and Record Settings.
• Select a format from MP3 and WAV
• Choose “Start Voice Recording” and click button to start your
recording
• Click button to pause or stop recording, click button M and
choose”YES” to save the recording.
• Find the recordings under “Recordings Library” and play as music.
Find the icon and press to enter radio mode. then a related list
will show including “Station list”, “Manual tune”, “Auto tune” and “FM
recording library”.
Station list
The frequency points of radio station are displayed with 30 frequency
points reserved at most.
Manual tune
Press to enter manual search mode, you can search programs
manually through pressing / button.
Auto tune
Press to enter Auto tune mode, it will show “Do you want to auto-
tune ”, press to confirm Yes or No. If choose Yes, it will be searching
automatically and automatically save searched station in“Station list”.
FM recording library
When listening to the broadcast station program, long press M button
to go to its sub-menu, including Home,Start FM radio recording,Clear
FOLDER
SETTING
EBook
preset,Auto tune and Tuner Region.
Note: the player is defaulted with command band, if you are in Japan,
you need to change to Japan Band.
Find the icon and press to enter folder menu. Here you can
check files you have stored on the device.
When you play music under “Folder”, it will shuffle songs by folder if
you turn shuffle on under “play mode”.
Find the
icon and press to enter. Here you can find all of the
ebooks you have stored on the device. Select and press to read
the ebook.
Find the icon and press to access the following settings:
“Language”, “Backlight timer”, “Date and time”, “Power off”, “Sleep
timer”, “Key tone”, “Format device”, “Factory settings”, “Information”.
When playing time is reach sleep timer you set, the player will
power off automatically
Choose the language according to your need
See information about your player under “Information”
Set the backlight time of your player
Format the device or restore to factory setting
If you have any question on this player, please contact with
support@agptek.com.
Loading...