
Thank you for purchasing AGPtek MP3 Player. Please read
the manual carefully before using the product.
Specifications are subject to change without prior notice.
You can transfer music from your computer to the player
using the drag-and-drop method or using music
management software such as Windows Media Player.
You can simply plug it into your computer and copy over
media files as if it were a hard drive.
1. By connecting to a computer with the included USB

The USB cable can both be used for data transfer and
2. By connecting to a charger(Not included)
Please note: The specifications of the charger must meet
the following requirements or any accident or failure
happened will be regarded as man-made damage.
Input: AC110-240V 50/60Hz Max:100mA
Output: DC5.0-5.5V 500mA-800mA
1. Power On: Slide the power switch to "On" position. If
the switch is already at "On" position, just press the play
1) Slide the power switch to "Off" position.
2) Press play button for 3 seconds when the switch is
1) Please put the power button to "Off" position if you
won’t use it for a long time.
2) If you cannot switch on the player, please make sure
the slider switch is on the right side.
3) When the player is on the music playing interface, if
you hold button to turn off it, next time you switch
on the player, it will start from the last position it left off.
Each time you press the button ▲/▼/ / , it will bring
you to one of its 9 different functions, including Music,
Radio, Folder, Setting, Record, Tools, Pictures, EBook and
While it’s on the main interface, press button to