AG Neovo X-19AV, X-15AV User Manual
Table of Contents
Precautions ................................................................................................... 2
Warning on installation .........................................................................2
Warning on power connection.............................................................. 2
Warning on tilt ......................................................................................3
Warning on Maintenance .....................................................................3
Warning on transportation.................................................................... 3
Package Contents ................................................................................ 4
Identify the Parts and Controls............................................................. 5
Setup .................................................................................................... 8
Software Configuration.........................................................................9
Customizing Your Monitor........................................................................... 10
Adjusting Your LCD Panel .................................................................. 10
Selecting OSD Features .................................................................... 10
OSD Menus........................................................................................ 11
Warning Messages and Troubleshooting ................................................... 17
Warning Messages............................................................................. 17
Troubleshooting.................................................................................. 18
Technical Specifications .............................................................................. 19
Specifications .....................................................................................19
Regulation................................................................................................... 21
FCC compliance.................................................................................21
WEEE.................................................................................................22
Hg.......................................................................................................22
1
Precautions
Warning on installation
Do not cover or block the ventilation holes in the case.
Do not install the monitor near heat sources such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust, mechanical vibration or shock.
Optional video adaptor installation
Turn off the power switch and unplug the monitor before installation to avoid electric
shock or damage.
Install the optional video adaptor on a stable surface. The monitor may cause injury or
damage if it falls or is dropped.
Warning on power connection
Use an appropriate power cord for your local power supply.
The outlet should be installed near the monitor and be easily accessible.
Do not allow anything to rest on the power cord.
Disconnect the power plug from the power outlet under following conditions:
If you will not use it for an indefinite period time.
When the power cord or plug is damaged of frayed.
If the product has been dropped or the cabinet has been damaged.
If the product exhibits a distinct change in performance, indicate a need for service.
2
Warning on tilt
Use the monitor’s tilt capability to adjust its vertical orientation to an appropriate position. Grasp
the top corners of the monitor with both hands and tilt to the desired angle.
X-19 / X-17 X-15
Warning on Maintenance
Clean the cabinet, glass, and controls with a soft cloth lightly moistened with a mild
detergent solution. Do not use any type of abrasive pad, scouring powder or solvent, such
as alcohol or benzene.
Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as a
pen or screwdriver. This type of contact may result in a scratched glass.
Do not insert sharp objects or spill liquid into the monitor through ventilation holes. They
may cause accident fire, electric shock or failure.
Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage potentials or other risks.
Warning on transportation
When you transport this monitor for repair or shipment, use the original carton and
packing materials.
3
Package Contents
Before using this monitor, check the following items are included in your carton box:
Monitor (*1)
Power adapter (*1)
Power cord (*1)
D-sub 15-pin signal cable (*1)
Digital DVI signal cable (*1) (Optional)
S- Video cable (*1,) (Optional)
CVBS cable (*1) (Optional)
CD-ROM (containing Windows information file and user’s manual)
Quick Guide
4
Identify the Parts and Controls
DC +12V Power inlet
Provides +12V DC power to the monitor.
VGA-In
D-sub 15-pin connector for VGA signal.
S-VIDEO-In (Optional)
Connector for S-Video signal.
CVBS-In (Optional)
Connector for CVBS signal.
Digital (Optional)
DVI-D connector for digital signal input
5
Up Button
1. Activate the On-Screen Display menu.
2. While the On-Screen Display menu appears, press to move the
selected item clockwise or onward.
INPUT / Down Button
1. While the On-Screen Display menu appears, press
selected item counterclockwise or backward.
Hot Key Input Select Hot key
Pressing
between auto and manual input select.
When the input select is under manual mode, press
input signal: D-sub, DVI, CVBS or S-Video. The option will toggle on the top
right hand corner of the display.
Increase Button
1. When the On-Screen Display menu is activated, press
the selected items.
2. When the On-Screen Display menu is activated, press
adjustable value of the selected item.
Decrease Button
1. When the On-Screen Display menu is activated, press
the selected item.
2. When the On-Screen Display menu is activated, press
adjustable value of the selected item.
to move the
and buttons at the same time for 5 seconds can switch
to choose the desired
to confirm/ enter
to increase the
to confirm/ enter
to decrease the
6
Loading...