AG Neovo WMK-02 User Manual

WMK-02

Wall Mount Kit

English

Package Contents

Before starting wall mount kit installation, be sure that the following items are contained in
the box.

 Wall Bracket ( *1)

 Quick Guide (*1)

BAG#1

 Screw A：T4-19mm (*3)

BAG#2

 Screw B：M4-20mm (*4)

 Wall anchor：1/4”-1” (*3)

English

Precautions

• Install your display and wall mount kit on the wall with a flat surface.

Be sure the wall can support the weight of a display weighing up to 18kgs (40 lbs).

•

• Use only the provided materials and follow the step-by-step instructions to finish the

installation.

Applicable LCD Display Models

This wall mount kit complies with VESA’s (Video Electronics Standards Association)
FPMPMI (Flat Panel Display Physical Mounting Interface) Standard. All AG Neovo
displays are suitable fo r this wall mo unt kit.

Tools you will need

You may need the following tools to complete wall mount installations.

• Phillips head screwdriver

Drill with 1/ 4” (6.35mm) bit (only if you want to insta ll your displa y on a concre te wall.)

•

English

Setup

Please follow the steps one by one to mount your display on the wall.

Step 1: Installing the Wall Bracket onto the Wall

Consult with appropriate engineering or construction personnel to ensure the

wall mount kit is mounted properly to handle applied loads.

Depe ndi ng o n the mat eria l a nd
construction of the wall, different types of
screws and tools will be needed to
complete this part of the installation.

• For a wooden wall, you may mount

the Wall Bracket to it by using screw A
directly.

• For a concrete wall, you need to drill

three 1 1/2” (38.1mm) deep holes,
insert the 3 wall anchors into the
holes accordingly. Then you ca n use
screws A to fix the Wall Bracket to the
wall.

The arrow sign on the metal plate

•

should poi nt upwards.

English

Step 2: Installing the Screw B to the rear of the LCD display

Use screw B with the holes in the rear of the display.

Step 3: Connect all the cables before attaching display to wall

It is difficult to connect cables after hanging the display on the wall.

Step 4: Hang the display on the Wall Bracket

The cable s should pas s through t he wall mo unt kit for be tter cable management.