Please carefully read through and keep the following instructions for future reference before using
the display.
•Please follow the display’s user manual’s instructions.
•Make sure to check that the local power supply complies with the display’s power requirements
•Do not block the ventilation pores on the rear of display and ensure there is enough space around the display to
allow for heat dissipation.
•Do not open the rear cover. Damage caused by improper use is not covered by warranty.
•Our company’s software products are copyrighted. Do not copy without authorization.
•Overexposure to direct sunlight can cause damage over time and a strong reflection will disturb the user’s
experience when viewing content on the display.
•Do not install near any heat source, such as radiators, heaters, stoves or any other products that may generate
heat (including sound amplifiers).
•Do not install the display on platforms or carts that are unstable, slanted or shaky. It may cause the display to fall,
injuring people around it and damaging the display itself. We suggest consulting with professionals in the securing
of the display.
•Always comply with all warnings and instructions labels on the display.
•Do not install the display in a confined environment.
•If you wish to mount the display in a recessed TV wall mount, make sure to leave enough space around the display
to ensure good ventilation and to avoid operation at an abnormal temperature.
•Avoid excessive pressure or temperature changes as special liquid-crystal material in the display may result in
cracks, scratches or damage.
•When the display’s power is on, do not cover or block any of the display’s ventilation pores. It is suggested to
periodically clean the display’s ventilation pores to ensure heat dissipation.
•Keep candles or other flammable items away from the display to avoid risks of fire.
•Do not stick your finger or other objects in-between the display and its stand base or its neighboring area in
order to avoid harming yourself or damaging the display.
•Do not press upon the display with too great a force so as to avoid damaging the product.
•ONLY USE accessories specified by the manufacturer.
•Never attempt to repair or open the display by yourself. Opening and removing the covers may expose you to
dangerous voltage or other hazards. Failure to follow this WARNING may result in death or serious injury. Please
contact your dealer or a service technician for assistance.
•Hold the display by the sides firmly with two people when carrying the display out of the box. Do not grasp the
touch screen.
« SAFETY INSTRUCTIONS » |3
WHAT’S IN THE BOX
Package Contents
Check your product box for the following items. If there are any missing accessories, contact the
local dealer where you purchased your display. The illustrations in this manual may differ from the
actual product and item.
DisplayRemote Control
Power Cord
4 | « WHAT’S IN THE BOX »
MOVING THE DISPLAY
Carrying the Display
When carrying the display, always hold it at the
right and left sides. Make sure the touch screen
faces forward and hold it with both hands when
lifting the display.
CAUTION: Avoid touching and applying stress with force using sharp objects on the
LCD panel at all times.
Setting Down the Display
When setting the display down, place the screen
face down on a flat and stable surface covered by
a protective sheet and a table cushion as shown
in the illustration provided.
CAUTION: Never press or place anything on the back cover. This may damage the
internal parts of the display.
Placing the Display
When placing the display, keep the display upright.
Never tilt the display towards the left, right or
balanced on a single corner of the frame.
« MOVING THE DISPLAY » |5
MOUNTING THE DISPLAY
Adjusting Directions
To avoid injuries, follow the installation instructions to safely install the display onto a wall.
It is recommended to allow a certified installation company conduct the wall mounting operation.
CAUTION: Dropping the display may cause injuries to people around it.
NOTE: A wall mount may be purchased separately for easier installation.
If you wish to use the display vertically or horizontally, adjust the display such that the main power
switch on the back of the display is pointing leftward or downward (as illustrated below), if the
display is not mounted in such a way the display may not function properly.
Horizontal usageVertical usage
NOTE: Before mounting, make sure there is space to connect your devices. See
“CONNECTING TO THE DISPLAY” on page 13”
6 | « MOUNTING THE DISPLAY »
Wall Mount Specifications
400.00mm
VESA MOUNTING
The back of the display is equipped with four screw-holes and matching taped holes, with a VESA
dimension of 400mm x 200mm. Firmly secure a VESA mount onto the display using 4 M6 screws
(maximum length: 10mm, maximum torque: 18 kgf.cm).
200.00mm
« MOUNTING THE DISPLAY » | 7
Loading...
+ 15 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.