Ag neovo TX-22 User Manual

TX-22 LED-Backlit Touch Display
User Manual
The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be reproduced,translated to another language or stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission. Windows is a registered trademark of Microsoft, Inc. Other brand or product names are trademarks of their respective holders.
The test results show that this device meets the FCC rules. Those limits are set to protect residential areas from the devices with harmful emission. This device will produce, use and radiate radio frequency energy. In addition, failure to follow the user’s manual to install or use this device might produce harmful interference with radio communication. Not withstanding the foregoing, it does not guarantee that this type of harmful interference does not occur in some special installations. The
interference caused by this device to the reception of radio or television signals may be veried by turning it on and off. Any changes or modications to this TFT LCD would void the user’s authority to
operate this device.
TABLE OF CONTENTS
Usage Notice
Precautions ......................................................................................................................................... 4
Chapter 1: Introduction
1.1 About TX-22 ....................................................................................................................................... 5
1.2 Touch Screen for TX-22 ...................................................................................................................... 5
1.3 Package Overview ............................................................................................................................. 6
Chapter 2: Installation
2.1 Product Overview ............................................................................................................................... 7
2.1.1 Front View ............................................................................................................................... 7
2.1.2 Bottom View (Without Stand) .................................................................................................. 7
2.2 VESA Mount for Your Monitor ............................................................................................................. 8
2.3 Start Your Installation ......................................................................................................................... 9
2.4 Connecting the Display ...................................................................................................................... 10
Chapter 3: User Controls
3.1 Side Panel Controls ............................................................................................................................ 11
3.2 How to Use the OSD Menus .............................................................................................................. 12
3.3 On-Screen Display Menus ................................................................................................................. 13
Chapter 4: Appendix
4.1 Troubleshooting .................................................................................................................................. 14
4.2 Warning Signal ................................................................................................................................... 15
4.2.1 No Signal ................................................................................................................................. 15
4.2.2 Going to Sleep......................................................................................................................... 15
4.2.3 Out of Range ........................................................................................................................... 15
4.3 Product Dimensions ........................................................................................................................... 16
4.4 Compatibility Modes ........................................................................................................................... 18
4.5 Touch Screen Driver Installation ......................................................................................................... 19
4.5.1 TX-22 Driver Install Instructions .............................................................................................. 19
Chapter 5: Specications
5.1 Display Specications ........................................................................................................................ 21
3
USAGE NOTICE
! Warning - To prevent the risk of re or shock hazards, do not expose this product to rain or moisture. ! Warning - Please do not open or disassemble the product as this may cause electric shock.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit.
Do:
Turn off the product before cleaning.
Touch screen surface may be cleaned using a soft clean cloth moistened with mild window glass • commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
Use a soft cloth moistened with mild detergent to clean the display housing.
Use only high quality and safety approved AC/DC adapter.
Disconnect the power plug from AC outlet if the product is not going to be used for an extended • period of time.
Don’t:
Do not touch the LCD display screen surface with sharp or hard objects.
Do not use abrasive cleaners, waxes or solvents for your cleaning.
Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic eld.
- In direct sunlight.
TX-22 is to be used as commercial and light industrial equipment only.
4
CHAPTER 1: INTRODUCTION

1.1 About TX-22

The TX-22 is a 21.5” at panel screen with an active matrix, thin-lm transistor (TFT) liquid crystal display (LCD).
Features include:
Direct Analog signal input
Direct Digital signal input
Active matrix TFT LCD technology
1920 x 1080 resolution
21.5” viewable display area - 16:9 aspect ratio
31.47 ~ 82.3 KHz horizontal scan
56 ~ 75 Hz high refresh rate
0.24795mm x 0.24795mm pixel pitch
Auto adjustment function
Multilingual OSD user control
100 mm VESA mount
Removable base for exible mounting solutions
Touch screen with USB controller

1.2 Touch Screen for TX-22

Projected Capacitive touch screen for nger input only
Surface: Glare treatment
Interface: USB controller
Transmittance: 90%±5%
®
HID: Windows
Driver: VISTA, XP, 2000, CE, XP Embedded, Linux, Apple
7
®
Mac OS
5
PRODUCT DESCRIPTION

1.3 Package Overview

LCD Display
USB Cable ( A to B)
CD
Power Cord
DVI-D Cable
Cable Cover Screw
VGA Signal Cable
DC Power Supply
6
CHAPTER 2: INSTALLATION
VGA
USB
DC IN
DVI
RJ11

2.1 Product Overview

2.1.1 Front View

2.1.2 Bottom View (Without Stand)

7
Loading...
+ 14 hidden pages