AG Neovo SX-15A, SX-17A User Manual
Table of Contents
Precautions ................................................................................................... 2
Warning on installation .........................................................................2
Warning on power connection.............................................................. 2
Warning on tilt ......................................................................................3
Warning on Maintenance .....................................................................3
Warning on transportation.................................................................... 3
Getting Started.............................................................................................. 4
Package Contents ................................................................................ 4
Identify the Parts and Controls............................................................. 5
How to Use the On-Screen Display Menu ........................................... 7
Setup .................................................................................................... 8
Software Configuration.........................................................................9
Customizing Your Monitor........................................................................... 10
Adjusting Your LCD Panel.................................................................. 10
Selecting OSD Features .................................................................... 10
OSD Menus........................................................................................ 11
Warning Messages and Troubleshooting ................................................... 17
Warning Messages............................................................................. 17
Troubleshooting.................................................................................. 18
Technical Specifications.............................................................................. 19
Specifications .....................................................................................19
Regulation................................................................................................... 21
FCC compliance.................................................................................21
WEEE.................................................................................................22
Hg.......................................................................................................22
1
Precautions
Warning on installation
Do not cover or block the ventilation holes in the case.
Do not install the monitor near heat sources such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust, mechanical vibration or shock.
Optional Video adaptor installation
Turn off the power switch and unplug the monitor before installation to avoid electric
shock or damage.
Install the optional video adaptor on a stable surface. The monitor may cause injury
or damage if it falls or is dropped.
Please use BNC output cable --- RG-59/U 75Ω coaxial cable (just like the BNC input
cable provided in the accessory box).
Warning on power connection
Use an appropriate power cord for your local power supply.
The outlet should be installed near the monitor and be easily accessible.
Do not allow anything to rest on the power cord.
Disconnect the power plug from the power outlet under following conditions:
If you will not use it for an indefinite period time.
When the power cord or plug is damaged of frayed.
If the product has been dropped or the cabinet has been damaged.
If the product exhibits a distinct change in performance, indicate a need for service.
2
Warning on tilt
Use the monitor’s tilt capability to adjust its vertical orientation to an appropriate
position. Grasp the top corners of the monitor with both hands and tilt to the desired
angle.
SX-19 / SX-17 SX-15
Warning on Maintenance
Clean the cabinet, glass, and controls with a soft cloth lightly moistened with a mild
detergent solution. Do not use any type of abrasive pad, scouring powder or solvent,
such as alcohol or benzene.
Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as
a pen or screwdriver. This type of contact may result in a scratched glass.
Do not insert sharp objects or spill liquid into the monitor through ventilation holes. They
may cause accident fire, electric shock or failure.
Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage potentials or other risks.
Warning on transportation
When you transport this monitor for repair or shipment, use the original carton and
packing materials.
3
Getting Started
Package Contents
Before using this monitor, check the following items are included in your carton box:
Monitor (*1)
Power adapter (*1)
Power cord (*1)
D-sub 15-pin signal cable (*1)
Digital DVI signal cable (*1)
BNC cable (*1,)
CD-ROM (containing Windows information file and user’s manual)
Quick Guide
4
Identify the Parts and Controls
DC +12V Power inlet
Provides +12V DC power to the monitor.
Digital
DVI-D connector for digital signal input
Video-In / Video-Out
BNC connector for Video signal.
VGA-Input
D-sub 15-pin connector for VGA signal.
5
Up Button
1. Activates the On-Screen Display menu.
2. While the On-Screen Display menu appears, press
selected item clockwise or onward
INPUT / Down Button
1. While the On-Screen Display menu appears, press
selected item counterclockwise or backward
2. Use as the Input Select Hot Key* when the On-Screen Display menu is
inactivated
INPUT Input Select Hot Key*
1. When the On-Screen Display menu is inactivated, use
Select Hot Key
Press
option will toggle on the top right hand corner of the display
2. Pressing
between auto and manual input select
Increase Button
1. When the On-Screen Display menu is activated, press
the selected item
2. When the On-Screen Display menu is activated, press
adjustable value of the selected item
Decrease Button
1. When the On-Screen Display menu is activated, press
the selected item
2. When the On-Screen Display menu is activated, press
adjustable value of the selected item
to move the
to move the
as the Input
to choose the desired input signal: D-Sub, DVI and CVBS. The
and buttons at the same time for 5 seconds can switch
to confirm / enter
to increase the
to confirm / enter
to decrease the
6
Loading...