AgilSense HB 100 User Manual

HB 100 MICROWAVE SENSOR MODULE

r

r

r

e

10.525GHz Microwave Motion Sensor Modul

Block diagram and connection

Description

HB100 Miniature Microwave Motion Sensor is a X-Band Bi-Static
Doppler transceiver module. Its built-in Dielectric Resonato
Oscillator (DRO) and a pair of Microstrip patch antenna array,
make it ideal for OEM usage in motion detection equipment.

This module is ideally suitable for false alarms reduction in intrude
detectors when work together with Passive Infrared (PIR) sensor. It
can also be used for auto-door opening and vehicle speed
measurement.

• Low current consumption

• CW or Pulse operation

•

Flat profile
Long detection range

•

Antenna Beam Pattern

180

0

-6

-12

-18

-24

-30

30

60

-6

-12

-18

-24

150

90

120

330

300

270

240

210

Applications Features

• Microwave-PIR motion detecto

• Speed measurement

• Lighting control

180

0

-6

-12

-18

-24

-30

-36

30

-18

-24

-30

150

330

300

270

240

210

60

-6

-12

90

120

Azimuth

Elevation

HB 100 Microwave Sensor Module

SS ISO 9001 : 2000

CERT. NO. : 94-1-0033

HB 100 MICROWAVE SENSOR MODULE

Elevation

Technical Specifications

Outline diagram (All dimensions in mm)

Elevation

Azimuth

Unless noted otherwise, the specifications are measured with +5VDC, CW operation, 12 kΩ load at ambient
temperature of +25°C.

Parameter Notes Min Typ. Max Units

Frequency Setting 1 10.520 10.525 10.530 GHz
Radiated Power (EIRP) 1 12 15 20 dBm
Spurious Emission 1 -7.3 dBm
Settling Time 3 6 µSec
Received Signal Strength 2 200 µVp-p
Noise 3 5 µVrms
Antenna Beam-width (3 dB) - Azimuth 80 °
Antenna Beam-width (3 dB) - Elevation 40 °
Supply Voltage 4.75 5.00 5.25 VDC
Current Consumption 30 40 mA
Pulse Repetition Frequency 4 2 KHz
Pulse Width 4 10 µSec
Operating Temperature -15 55 °C
Weight 8 gm

Note 1: The radiated emissions of HB100 is designed to meet the requirements of Federal Communications

Commission (FCC) rules, Part 15, Section 15.245 (use within a building or to open building door)

Note 2: The Received Signal Strength (RSS) is measured at the total 2 ways path loss of 93dB.

Note 3: The noise voltages are measured from 10 Hz to 100 Hz at the output port, inside an Anechoic

chamber.

Note 4: Pulse operation.
Note 5: The design, manufacturing process and specifications of this device are subjected to change

without prior notice.

Note 6: CAUTION

: ELECTROSTATIC SENSITIVE DEVICE. Observe precautions for handling and storage.

VER 1.02

A company of Singapore Technologies Engineering