The Agilent N5700 Series
system DC power supplies
give you just the right performance — at just the right
price — in a compact (1 U)
package. This family of
affordable 750 W and 1500 W
single-output programmable
DC power supplies consists
of 24 models for simple DC
power applications. They
provide stable output power,
built-in voltage and current
measurement, and output
voltage and current from 6 V
to 600 V and 1.3 A to 180 A.
These economical supplies
offer many system-ready
features like multiple standard
I/O interfaces to simplify and
accelerate test-system development for R&D, design validation,
and manufacturing engineers
in the aerospace/defense,
automotive, component and
communications industries.
Small, High-Density Package
Saves You Rack Space
The N5700 provides up to 1500 W
in a small space-saving 1 U-high,
19-inch-wide package. Its air
vents are in the front, side and
rear (not on the top or bottom),
so you can stack other instruments directly above or below it
to save valuable rack space.
Family of Affordable Basic
System DC Power Supplies
Agilent N5700 Series
System DC Power Supplies
Models: N5741A-49A, N5750A-52A, N5761A-69A, N5770A-72A
Data Sheet
• 24 Models: 750 W and 1500 W output power
• Up to 600 V and up to 180 A
• Small high density 1 U package
• Built-in voltage and current measurement
• Full protection from over-voltage and over-current
• 85-265 Vac Universal AC input
• LAN, USB, and GPIB interfaces standard
Agilent Technologies
Easy Front-Panel Operation
You can quickly and easily
operate the power supply with
its rotary knobs and buttons.
Using the front-panel controls,
you can make coarse or fine
adjustments of output voltage
and current, protection settings,
and set power-on states (last
setting memory or factory
default setting). The output
voltage and current are
displayed simultaneously,
and LED indicators show
power supply status and
operating modes. You can
lock the front panel controls
to protect against accidental
power-supply parameter
changes.
Extensive Device Protection
To safeguard your device from
damage, the N5700 Series
power supplies provide overtemperature, over-current and
over-voltage protection (OVP)
to shut down the power supply
output when a fault condition
occurs. They also offer an
under-voltage limit (UVL) that
prevents adjustment of the
output voltage below a certain
limit. The combination of UVL
and OVP capabilities lets you
create a protection window for
sensitive load circuitry.
Simplify System Connections
The N5700 Series power supplies
comes standard with GPIB,
Ethernet/LAN, and USB 2.0
interfaces giving you the flexibility to use your I/O interface
of choice today and in the future.
When used in a system running
GPIB, the LAN and/or USB
interfaces can be disabled for
extra security.
2
Figure 1. Front-panel control knobs and buttons make it easy to use N5700 power supplies.
Figure 2. Built-in Ethernet, USB 2.0, and GPIB interfaces enable easy system connections
Remote Access and Control
The built-in Web server
provides remote access and
control of the instrument via
a standard browser such as
Microsoft® Internet Explorer.
Using the Web browser, you
can set up, monitor and
operate the N5700 remotely.
Easy System Integration
and Configuration
To simplify system development,
the N5700 comes standard with
IVI-COM drivers. The N5700
supports the easy-to-use SCPI
(Standard Commands for
Programmable Instruments).
Plus it includes a compatibility
command set for the Xantrex
XFR series power supplies, the
Sorensen DLM series power
supplies and the Agilent 603x
series power supplies.
Flexible configuration: Connect
Multiple Units in Parallel and Series
Should you need greater output
power, the N5700 series power
supplies give you the flexibility
to connect in parallel up to
four similarly rated units for
greater output current and
connect two similarly rated
units in series for greater
output voltage (see output
terminal isolation information).
Analog Programming
and Monitoring
The output voltage and current
can be programmed from zero
to full scale by either an analog
voltage 0 to 5 V or 0 to 10 V
or by resis
tances of 0 to 5 kΩ
or 0 to 10 kΩ.
Universal AC input
All N5700 models have universal
AC input so they can be
automatically operated from
any AC mains input voltage
worldwide. They can be
operated
from line voltages
of 85 – 265 Vac, 47 to 63 Hz,
with no switch to set or fuses
to change when you switch
from one voltage standard to
another. They also provide
power factor correction.
Rack Mounting
The rack mount ears and
handles are provided standard
with every unit. In addition the
N5740A rack mount slide kit
makes it easy to integrate an
N5700 into a test rack by
providing all the necessary
hardware to rack mount an
N5700 series power supply
in only 1 U of rack space.
3
Figure 3. N5700 series web graphical user interface for remote access and control of the power supply
4
(change from 85-132 VAC
input or 170-265 VAC input)
(to settle to within 0.5%
of the rated output, with
a resistive load)
N5741A N5742A N5743A N5744A N5745A N5746A
DC Output ratings Voltage 6 V 8 V 12.5 V 20 V 30 V 40 V
Current 100 A 90 A 60 A 38 A 25 A 19 A
Power 600 W 720 W 750 W 760 W 750 W 760 W
Output Ripple and Noise CV p-p
1
60 mV 60 mV 60 mV 60 mV 60 mV 60 mV
CV rms
2
8 mV 8 mV 8 mV 8 mV 8 mV 8 mV
Load Effect Voltage 2.6 mV 2.8 mV 3.25 mV 4 mV 5 mV 6 mV
(change from no load
Current 25 mA 23 mA 17 mA 12.6 mA 10 mA 8.8 mA
to full load)
Source Effect Voltage 2.6 mV 2.8 mV 3.25 mV 4 mV 5 mV 6 mV
Current 12 mA 11 mA 8 mA 5.8 mA 4.5 mA 3.9 mA
Programming Accuracy Voltage 0.05%+ 3 mV 4 mV 6.25 mV 10 mV 15 mV 20 mV
Current 0.1%+ 100 mA 90 mA 60 mA 38 mA 25 mA 19 mA
Measurement Accuracy Voltage 0.1%+ 6 mV 8 mV 12.5 mV 20 mV 30 mV 40 mV
Current 0.1%+
300 mA 270 mA 180 mA 114 mA 75 mA 57 mA
Load Transient Recovery Time
3
Time ≤1.2 ms ≤1.2 ms ≤1.2 ms ≤1 ms ≤1 ms ≤1 ms
Supplemental Characteristics
Output Response Time Up, full load 0.08 s 0.08 s 0.08 s 0.08 s 0.08 s 0.08 s
Down, full load 0.01 s 0.05 s 0.05 s 0.05 s 0.08 s 0.08 s
Down, no load 0.5 s 0.6 s 0.7 s 0.8 s 0.9 s 1.0 s
Command Response Time
4
55 ms
Remote Sense Compensation
Volts/load lead 1 V 1 V 1 V 1 V 1.5 V 2 V
Over-voltage Protection Range 0.5-7.5 V 0.5-10 V 1-15 V 1-24 V 2-36 V 2-44 V
Accuracy 0.06 V 0.08 V 0.125 V 0.20 V 0.30 V 0.40 V
Output Ripple and Noise5CC rms 200 mA 180 mA 120 mA 76 mA 63 mA 48 m
Programming Resolution Voltage 0.72 mV 0.96 mV 1.5 mV 2.4 mV 3.6 mV 4.8 mV
Measurement Resolution
Current 12 mA 10.8 mA 7.2 mA 4.56 mA 3 mA 2.3 mA
Front Panel Display Accuracy
Voltage 0.03 V 0.04 V 0.06 V 0.10 V 0.15 V 0.20 V
(4 digits; ±1 count)
Current 0.50 A 0.45 A 0.30 A 0.19 A 0.13 A 0.10 A
Notes:
1
Up to 20 MHz
2
From 5 Hz – 1 MHz
3
Time for output voltage to recover within 0.5% of its rated output for a load change from
10 to 90% of its rated output current. Voltage set point from 10% to 100% of rated output
4
Add this to the output reponse time to obtain the total programming time
5
From 5 Hz – 1 MHz, at 10% to 100% of output voltage at full load
(for 6 V units from 33% to 100% of output voltage)
Supplemental characteristics are not warranted but are descriptions of typical performance determined either by design or type testing.
Performance Specifications Unless otherwise noted, specifications are warranted over the ambient temperature range of 0 to 40°C.
5
(change from 85-132 VAC
input or 170-265 VAC input)
(to settle to within 0.5%
of the rated output, with
a resistive load)
N5747A N5748A N5749A N5750A N5751A N5752A
DC Output ratings Voltage 60 V 80 V 100 V 150 V 300 V 600 V
Current 12.5 A 9.5 A 7.5 A 5 A 2.5 A 1.3 A
Power 750 W 760 W 750 W 750 W 750 W 780 W
Output Ripple and Noise CV p-p
1
60 mV 80 mV 80 mV 100 mV 150 mV 300 mV
CV rms
2
8 mV 8 mV 8 mV 12 mV 20 mV 60 mV
Load Effect Voltage 8 mV 10 mV 12 mV 17 mV 32 mV 62 mV
(change from no load
Current 7.5 mA 6.9 mA 6.5 mA 6 mA 5.5 mA 5.26 mA
to full load)
Source Effect Voltage 8 mV 10 mV 12 mV 17 mV 32 mV 62 mV
Current 3.25 mA 2.95 mA 2.75 mA 2.5 mA 2.25 mA 2.13 mA
Programming Accuracy Voltage 0.05%+ 30 mV 40 mV 50 mV 75 mV 150 mV 300 mV
Current 0.1%+ 12.5 mA 9.5 mA 7.5 mA 5 mA 2.5 mA 1.3 mA
Measurement Accuracy Voltage 0.1%+ 60 mV 80 mV 100 mV 150 mV 300 mV 600 mV
Current 0.1%+
37.5 mA 28.5 mA 22.5 mA 15 mA 7.5 mA 3.9 mA
Load Transient Recovery Time
3
Time ≤ 1 ms ≤ 1 ms ≤ 1 ms ≤ 2 ms ≤2 ms ≤ 2 ms
Supplemental Characteristics
Output Response Time Up, full load 0.08 s 0.15 s 0.15 s 0.15 s 0.15 s 0.25 s
Down, full load 0.08 s 0.15 s 0.15 s 0.15 s 0.15 s 0.30 s
Down, no load 1.1 s 1.2 s 1.5 s 2.0 s 2.5 s 4.0 s
Command Response Time
4
55 ms
Remote Sense Compensation
Volts/load lead 3 V 4 V 5 V 5 V 5 V 5 V
Over-voltage Protection Range 5-66 V 5-88 V 5-110 V 5-165 V 5-330 V 5-660 V
Accuracy 0.60 V 0.80 V 1 V 1.5 V 3 V 6 V
Output Ripple and Noise5CC rms 38 mA 29 mA 23 mA 18 mA 13 mA 8 mA
Programming Resolution Voltage 7.2 mV 9.6 mV 12 mV 18 mV 36 mV 72 mV
Measurement Resolution
Current 1.5 mA 1.14 mA 0.9 mA 0.6 mA 0.3 mA 0.156 mA
Front Panel Display Accuracy
Voltage 0.3 V 0.4 V 0.5 V 0.75 V 1.5 V 3 V
(4 digits; ±1 count)
Current 0.0625 A 0.0475 A 0.0375 A 0.0250 A 0.0125 A 0.0065 A
Notes:
1
Up to 20 MHz
2
From 5 Hz – 1 MHz
3
Time for output voltage to recover within 0.5% of its rated output for a load change from
10 to 90% of its rated output current. Voltage set point from 10% to 100% of rated output
4
Add this to the output reponse time to obtain the total programming time
5
From 5 Hz – 1 MHz, at 10% to 100% of output voltage at full load
(for 6 V units from 33% to 100% of output voltage)
Supplemental characteristics are not warranted but are descriptions of typical performance determined either by design or type testing.
Performance Specifications Unless otherwise noted, specifications are warranted over the ambient temperature range of 0 to 40°C.
6
(change from 85-132 VAC
input or 170-265 VAC input)
(to settle to within 0.5%
of the rated output, with
a resistive load)
N5761A N5762A N5763A N5764A N5765A N5766A
DC Output ratings Voltage 6 V 8 V 12.5 V 20 V 30 V 40 V
Current 180 A 165 A 120 A 76 A 50 A 38 A
Power 1080 W 1320 W 1500 W 1520 W 1500 W 1520 W
Output Ripple and Noise CV p-p
1
60 mV 60 mV 60 mV 60 mV 60 mV 60 mV
CV rms
2
8 mV 8 mV 8 mV 8 mV 8 mV 8 mV
Load Effect Voltage 2.6 mV 2.8 mV 3.25 mV 4 mV 5 mV 6 mV
(change from no
Current 41 mA 38 mA 29 mA 20.2 mA 15 mA 12.6 mA
load to full load)
Source Effect Voltage 2.6 mV 2.8 mV 3.25 mV 4 mV 5 mV 6 mV
Current 20 mA 18.5 mA 14 mA 9.6 mA 7 mA 5.8 mA
Programming Accuracy Voltage 0.05%+ 3 mV 4 mV 6.25 mV 10 mV 15 mV 20 mV
Current 0.1%+
180 mA 165 mA 120 mA 76 mA 50 mA 38 mA
Measurement Accuracy Voltage 0.1%+ 6 mV 8 mV 12.5 mV 20 mV 30 mV 40 mV
Current 0.1%+
540 mA 495 mA 360 mA 228 mA 150 mA 114 mA
Load Transient Recovery Time
3
Time ≤1.2 ms ≤1.2 ms ≤1.2 ms ≤1 ms ≤1 ms ≤1 ms
Supplemental Characteristics
Output Response Time Up, full load 0.08 s 0.08 s 0.08 s 0.08 s 0.08 s 0.08 s
Down, full load 0.01 s 0.05 s 0.05 s 0.05 s 0.08 s 0.08 s
Down, no load 0.5 s 0.6 s 0.7 s 0.8 s 0.9 s 1.0 s
Command Response Time
4
55 ms
Remote Sense Compensation
Volts/load lead 1 V 1 V 1 V 1 V 1.5 V 2 V
Over-voltage Protection Range 0.5-7.5 V 0.5-10 V 1-15 V 1-24 V 2-36 V 2-44 V
Accuracy 0.06 V 0.08 V 0.125 V 0.20 V 0.30 V 0.40 V
Output Ripple and Noise5CC rms 360 mA 330 mA 240 mA 152 mA 125 mA 95 mA
Programming Resolution Voltage 0.72 mV 0.96 mV 1.5 mV 2.4 mV 3.6 mV 4.8 mV
Measurement Resolution
Current 21.6 mA 19.8 mA 14.4 mA 9.12 mA 6 mA 4.6 mA
Front Panel Display Accuracy
Voltage 0.03 V 0.04 V 0.0625 V 0.1 V 0.15 V 0.2 V
(4 digits; ±1 count)
Current 0.90 A 0.825 A 0.60 A 0.38 A 0.25 A 0.19 A
Notes:
1
Up to 20 MHz
2
From 5 Hz – 1 MHz
3
Time for output voltage to recover within 0.5% of its rated output for a load change from
10 to 90% of its rated output current. Voltage set point from 10% to 100% of rated output
4
Add this to the output reponse time to obtain the total programming time
5
From 5 Hz – 1 MHz, at 10% to 100% of output voltage at full load
(for 6 V units from 33% to 100% of output voltage)
Supplemental characteristics are not warranted but are descriptions of typical performance determined either by design or type testing.
Performance Specifications Unless otherwise noted, specifications are warranted over the ambient temperature range of 0 to 40°C.
7
(change from 85-132 VAC
input or 170-265 VAC input)
(to settle to within 0.5%
of the rated output, with
a resistive load)
N5767A N5768A N5769A N5770A N5771A N5772A
DC Output ratings Voltage 60 V 80 V 100 V 150 V 300 V 600 V
Current 25 A 19 A 15 A 10 A 5 A 2.6 A
Power 1500 W 1520 W 1500 W 1500 W 1500 W 1560 W
Output Ripple and Noise CV p-p
1
60 mV 80 mV 80 mV 100 mV 150 mV 300 mV
CV rms
2
8 mV 8 mV 8 mV 12 mV 20 mV 60 mV
Load Effect Voltage 8 mV 10 mV 12 mV 17 mV 32 mV 62 mV
(change from no
Current 10 mA 8.8 mA 8 mA 7 mA 6 mA 5.5 mA
load to full load)
Source Effect Voltage 8 mV 10 mV 12 mV 17 mV 32 mV 62 mV
Current 4.5 mA 3.9 mA 3.5 mA 3 mA 2.5 mA 2.26 mA
Programming Accuracy Voltage 0.05%+ 30 mV 40 mV 50 mV 75 mV 150 mV 300 mV
Current 0.1%+
25 mA 19 mA 15 mA 10 mA 5 mA 2.6 mA
Measurement Accuracy Voltage 0.1%+ 60 mV 80 mV 100 mV 150 mV 300 mV 600 mV
Current 0.1%+
75 mA 57 mA 45 mA 30 mA 15 mA 7.8 mA
Load Transient Recovery Time
3
Time ≤ 1 ms ≤ 1 ms ≤ 1 ms ≤ 2 ms ≤2 ms ≤ 2 ms
Supplemental Characteristics
Output Response Time Up, full load 0.08 s 0.15 s 0.15 s 0.15 s 0.15 s 0.25 s
Down, full load 0.08 s 0.15 s 0.15 s 0.15 s 0.15 s 0.30 s
Down, no load 1.1 s 1.2 s 1.5 s 2.0 s 2.5 s 4.0 s
Command Response Time
4
55 ms
Remote Sense Compensation
Volts/load lead 3 V 4 V 5 V 5 V 5 V 5 V
Over-voltage Protection Range 5-66 V 5-88 V 5-110 V 5-165 V 5-330 V 5-660 V
Accuracy 0.60 V 0.80 V 1 V 1.5 V 3 V 6 V
Output Ripple and Noise5CC rms 75 mA 57 mA 45 mA 35 mA 25 mA 12 mA
Programming Resolution Voltage 7.2 mV 9.6 mV 12 mV 18 mV 36 mV 72 mV
Measurement Resolution
Current 3 mA 2.28 mA 1.8 mA 1.2 mA 0.6 mA 0.312 mA
Front Panel Display Accuracy
Voltage 0.3 V 0.4 V 0.5 V 0.75 V 1.5 V 3 V
(4 digits; ±1 count)
Current 0.125 A 0.095 A 0.075 A 0.050 A 0.025 A 0.013 A
Notes:
1
Up to 20 MHz
2
From 5 Hz – 1 MHz
3
Time for output voltage to recover within 0.5% of its rated output for a load change from
10 to 90% of its rated output current. Voltage set point from 10% to 100% of rated output
4
Add this to the output reponse time to obtain the total programming time
5
From 5 Hz – 1 MHz, at 10% to 100% of output voltage at full load
(for 6 V units from 33% to 100% of output voltage)
Supplemental characteristics are not warranted but are descriptions of typical performance determined either by design or type testing.
Performance Specifications Unless otherwise noted, specifications are warranted over the ambient temperature range of 0 to 40°C.
Series and Parallel Capability
Parallel operation
Up to 4 units can be connected
in master/slave mode
Series operation
Up to 2 units can be
connected in series
Output Terminal Isolation
6 V to 60 V units
No output terminal may be
more than ±60 VDC from
any other terminal or
chassis ground
80 V to 600 V units
No output terminal may
be more than ±600 VDC
from any other terminal
or chassis ground
Store-recall States
Volatile memory
locations:
16
Analog Programming
(of output voltage and current)
Input Signal
selectable;
0 to 5 V / 0 to 10 V full scale
Input Impedance
selectable;
0 to 5kΩ/ 0 to 10 kΩfull scale
Interface Capabilities
GPIB
SCPI - 1993, IEEE 488.2
compliant interface
USB 2.0
Requires Agilent I/O Library
version L.01.01
10/100 LAN
Requires Agilent I/O library
version L.01.01
Web Server
Built-in Web server
requires Internet Explorer 5+
or Netscape 6.2+
Environmental Conditions
Environment
Indoor use, installation
category II (AC input),
pollution degree 2
Operating temperature
0°C to 40°C @ 100% load
Storage temperature
–20°C to 70°C
Operating humidity
30% to 90% relative humidity
(no condensation)
Storage humidity
10% to 95% relative humidity
(no condensation)
Altitude
•
Up to 3000 meters.
Derate the output current
by 2%/100 m above 2000 m.
• Derate the maximum
ambient temperature
by 1°C/100 m above 2000 m.
Regulatory Compliance
EMC
•
European EMC directive
89/336/EEC for Class A
products
• Australian C- Tick mark
• This ISM device complies
with Canadian ICES-001.
Cet appareil ISM est
conforme à la norme
NMB-001 du Canada.
Safety
•
European Low Voltage
Directive 73/23/EEC
• US and Canadian
safety standards
• Any LEDs used in this
product are Class 1 as
per IEC 825-1
Acoustic Noise Declaration
Emission Directive:
• Sound Pressure Lp
<70 dB(A), At Operator
Position, *Normal Operation,
*According to EN 27779
(Type Test).
• Schalldruckpegel Lp
<70 dB(A) *Am Arbeitsplatz,
*Normaler Betrieb, *Nach EN
27779 (Typprüfung).
AC Input
Nominal Input
100 – 240 VAC; 50/60 Hz
Input Current 750 W
10.5 A @ 100 VAC nominal;
5 A @ 200 VAC nominal
Input Current 1500 W
21 A @ 100 VAC nominal;
11 A @ 200 VAC nominal
Input Range
85 – 265 VAC; 47 – 63 Hz.
Power Factor
0.99 at nominal input
and rated output power
Efficiency
76% – 87% for 750 W units;
77% – 88% for 1500 W units
Inrush Current
<25 A for 750 W units;
<50 A for 1500 W units
Dimensions
(excluding connectors,
and handles)
Height 43.6 mm (1.72 in)
Width 422.8 mm (16.65 in)
Depth 432.8 mm (17.04 in)
Weight
750 W 7 Kg (15.4 lbs.)
1500 W 8.5 Kg (18.7 lbs.)
8
Supplemental Characteristics for All Model Numbers
9
+S+LSNC-LC-S
SW1
GPIB
ANALOG PROGRAMMING
NOT ACTIVE
AC INPUT
J2
J1
TX
LINK
ON
OFF
10/100 Ethernet
422.8 mm
+V –V
1 2 3 4 5 6 7 8 9
DC AMPSDC VOLTS
PROT FINE LIMIT
POWER
UVL
OVP
OCP REM OUT ON
VOLTAGE CURRENT
N5749A
100 V / 7.5 A / 750 W
Sytem DC Power Supply
482.8 mm
43.6 mm
507.0 mm
433.0 mm
57.8 mm 92.0 mm 92.0 mm
21.0 mm
A A A
AC Input
Strain-Relief Detail
1500 W Models
DC Output
Bus-Bar Detail
6 V to 60 V
Models
39.5 mm
30.0 mm
22.0 mm
8.5 mm
3.0 mm
104.0 mm
Outline Diagram
10
Front Panel
(All Models)
Rear Panel
(6 V to 60 V Models)
Rear Panel
(80 V to 600 V Models)
= air flow (in front, out rear)
Front and Rear Panel Detail
Available Models Options
1500 W Models
Opt 861
Unterminated Power
Cord, USA, Canada
Opt 862
Harmonized Unterminated
Power Cord, Europe
750 W Models
Opt 900
Power Cord, United Kingdom
Opt 902
Power Cord, Europe
Opt 903
Power Cord, USA, Canada
Opt 918
Power Cord, Japan
Opt 922
Power Cord, China
Accessories
N5740A
Rack Mount Slide Kit
(required for rack
mounting;
standard
system 11 rack-mounting
hardware will not work)
11
Ordering Information
750 W Models
N5741A System DC Power Supply 6 V, 100 A, 600 W
N5742A System DC Power Supply 8 V, 90 A, 720 W
N5743A System DC Power Supply 12.5 V, 60 A, 750 W
N5744A System DC Power Supply 20 V, 38 A, 760 W
N5745A System DC Power Supply 30 V, 25 A, 750 W
N5746A System DC Power Supply 40 V, 19 A, 760 W
N5747A System DC Power Supply 60 V, 12.5 A, 750 W
N5748A System DC Power Supply 80 V, 9.5 A, 760 W
N5749A System DC Power Supply 100 V, 7.5 A, 750 W
N5750A System DC Power Supply 150 V, 5 A, 750 W
N5751A System DC Power Supply 300 V, 2.5 A, 750 W
N5752A System DC Power Supply 600 V, 1.3 A, 780 W
1500 W Models
N5761A System DC Power Supply 6 V, 180 A, 1080 W
N5762A System DC Power Supply 8 V, 165 A, 1320 W
N5763A System DC Power Supply 12.5 V, 120 A, 1500 W
N5764A System DC Power Supply 20 V, 76 A, 1520 W
N5765A System DC Power Supply 30 V, 50 A, 1500 W
N5766A System DC Power Supply 40 V, 38 A, 1520 W
N5767A System DC Power Supply 60 V, 25 A, 1500 W
N5768A System DC Power Supply 80 V, 19 A, 1520 W
N5769A System DC Power Supply 100 V, 15 A, 1500 W
N5770A System DC Power Supply 150 V, 10 A, 1500 W
N5771A System DC Power Supply 300 V, 5 A, 1500 W
N5772A System DC Power Supply 600 V, 2.6 A, 1560 W
By internet, phone, or fax, get assistance
with all your test & measurement needs
Online assistance:
www.agilent.com/find/assist
Phone or Fax
United States:
(tel) 1 800 829 4444
Canada:
(tel) 1 877 894 4414
(fax) (905) 282 6495
China:
(tel) 800 810 0189
(fax) 800 820 2816
Europe:
(tel) (31 20) 547 2323
(fax) (31 20) 547 2390
Japan:
(tel) (81) 426 56 7832
(fax) (81) 426 56 7840
Korea:
(tel) (82 2) 2004 5004
(fax) (82 2) 2004 5115
Latin America:
(tel) (305) 269 7500
(fax) (305) 269 7599
Taiwan:
(tel) 0800 047 866
(fax) 0800 286 331
Other Asia Pacific Countries:
(tel) (65) 6375 8100
(fax) (65) 6836 0252
Email: tm_asia@agilent.com
Microsoft®and Windows®are U.S. registered
trademarks of Microsoft
®
Corporation
Product specifications and descriptions in this
document subject to change without notice.
For the latest and complete specifications,
refer to the N5700 User’s Guide, Agilent part
number 5969-2917. The web contains the
most up-to-date version of the User’s Guide.
Go to http://www.agilent.com/find/N5700
© Agilent Technologies, Inc. 2004
Printed in the USA July 22, 2004
5989-1330EN
Agilent Technologies’ Test and Measurement
Support, Services, and Assistance
Agilent Technologies aims to maximize the
value you receive, while minimizing your risk
and problems. We strive to ensure that you
get the test and measurement capabilities you
paid for and obtain the support you need. Our
extensive support resources and services can
help you choose the right Agilent products for
your applications and apply them successfully.
Every instrument and system we sell has a
global warranty. Support is available for at
least five years beyond the production life of
the product. Two concepts underlie Agilent’s
overall support policy: “Our Promise” and
“Your Advantage.”
Our Promise
Our Promise means your Agilent test and
measurement equipment will meet its
advertised performance and functionality.
When you are choosing new equipment,
we will help you with product information,
including realistic performance specifications
and practical recommendations from
experienced test engineers. When you use
Agilent equipment, we can verify that it works
properly, help with product operation, and
provide basic measurement assistance for
the use of specified capabilities, while your
instrument is under warranty or technical
support contract. Many self-help tools
are available on Agilent’s web site.
Your Advantage
Your Advantage means that Agilent offers
a wide range of additional expert test and
measurement services, which you can
purchase according to your unique technical
and business needs. Solve problems efficiently
and gain a competitive edge by contracting
with us for calibration, extra-cost upgrades,
out-of-warranty repairs, and on-site education
and training, as well as design, system
integration, project management, and other
professional engineering services. Experienced
Agilent engineers and technicians worldwide
can help you maximize your productivity,
optimize the return on investment of your
Agilent instruments and systems, and obtain
dependable measurement accuracy for the
life of those products.
Agilent T&M Software and Connectivity
Agilent’s Test and Measurement software
and connectivity products, solutions and
developer network allows you to take time
out of connecting your instruments to your
computer with tools based on PC standards,
so you can focus on your tasks, not on your
connections. Visit www.agilent.com/find/
connectivity for more information.
Agilent Email Updates
www.agilent.com/find/emailupdates
Get the latest information on the products
and applications you select.
Agilent Technologies
Loading...