22
Available Options Description
Option 003 Shielding Option for use in severe environments or with
sensitive devices under test – shields both ways (in and out):
RS-03 Magnetic interface shielding added to CRT, and RE-02
display shield added to CRT to reduce radiated interference
Option 1CM Rackmount kit (same as 1186A) .
Warranty and Calibration Options:
All models include a standard 3-year warranty. Contact local sales office for prices of extended options:
A6J ANSI/NSCL Z540 calibration with test data (replaces 1BP)
W32 3-year, customer-return calibration service
W34 3-year, customer-return standard comp cal service
W50 Additional 2-year warranty (5 year total)
W52 5-year, customer-return calibration service
W54 5-year, customer-return standard comp cal service
Accessories Description
1183A Testmobile scope cart
1185A Carrying case
1186A Rackmount kit (same as option 1CM)
N2726A Accessory pouch & front panel cover
(standard with 100-MHz models, optional with 60-MHz models)
N2727A Seiko thermal printer and pouch, parallel cable,
power cable, 2 rolls paper, front panel cover
N2728A 10 rolls of printer paper
N2757A GPIB interface module for 54620-Series and 54640-Series scopes
N2758A CAN trigger module
Passive Probes Description
10070C 1:1 passive probe with ID
10073C 10:1 500 MHz passive probe with ID
10074C 10:1 150 MHz passive probe with ID
Ordering Information (continued)
23
Ordering Information (continued)
Fine Pitch Probing Description
10072A Fine-pitch probe kit
10075A 0.5 mm, IC clip kit
E2613B 0.5mm, Wedge probe adapter, 3-signal, qty 2
E2614A 0.5 mm, Wedge probe adapter, 8-signal, qty 1
E2643A 0.5 mm, Wedge probe adapter 16-signal, qty 1
E2615B 0.65mm, Wedge probe adapter, 3-signal, qty 2
E2616A 0.65 mm, Wedge probe adapter, 8-signal, qty 1 .
E2644A 0.65 mm, Wedge probe adapter, 16-signal, qty 1
Current Probes Description
1146A 100 kHz current probe, ac/dc .
N2774A 50 MHz current probe, ac/dc
N2775A Power supply for N2774A
High Voltage Probes Description
10076A 100:1, 4 kV 250 MHz probe with ID
N2771A 1000:1, 15 kV, 50 MHz high voltage probe.
Logic Probes Description
10085-68701 16:16 logic cable and terminator (for use with
54621D/622D/641D/642D)
54620-68701 16:2 x 8 logic input probe assembly (shipped standard
with 54621D/622D/641D/642D)
Active probes Description
1144A 800 MHz active probe
1145A 2-channel 750MHz active probe
1142A power supply for 1144A and 1145A
Differential Probes Description
N2772A 20 MHz differential probe
N2773A Differential probe power supply
Cables Description
10833A GPIB cable, 1m long
34398A RS-232 cable (standard with 100 MHz, 350 MHz,
and 500 MHz scopes)
Loading...