Agilent E5091A Configuration Guide

Agilent
ENA RF Network Analyzer

Configuration Guide

E5071C 9 kHz to 4.5 GHz

100 kHz to 4.5 GHz (with bias tees)
9 kHz to 8.5 GHz
100 kHz to 8.5 GHz (with bias tees)

E5091A Multiport test set

This configuration guide describes standard configurations,
options, accessories and peripherals for the ENA RF
network analyzer. Refer to the ENA Data Sheet for a
complete description of the ENA RF network analyzers
and the E5091A multiport test set.

2

Ordering guide for the ENA

This guide is intended to assist you in the ordering process.
Additional information and products (such as multiport
test set, calibration kits and cables) are described
throughout this document.

❍ = Choose ONE and ONLY one
❏ = Choose any combination

Step 1: Choose your frequency range, number of test ports,

and with or without bias tees

Up to 4.5 GHz range

9 kHz to 4.5 GHz (without bias tees)

❍ 2-port S-parameter test set, choose Option E5071C-240
❍ 4-port S-parameter test set, choose Option E5071C-440

100 kHz to 4.5 GHz (with bias tees)

❍ 2-port S-parameter test set, choose Option E5071C-245
❍ 4-port S-parameter test set, choose Option E5071C-445

Up to 8.5 GHz range

9 kHz to 8.5 GHz (without bias tees)

❍ 2-port S-parameter test set, choose Option E5071C-280
❍ 4-port S-parameter test set, choose Option E5071C-480

100 kHz to 8.5 GHz (with bias tees)

❍ 2-port S-parameter test set, choose Option E5071C-285
❍ 4-port S-parameter test set, choose Option E5071C-485

Step 2: Would you like to add frequency-offset

measurement capability?
❍ Yes, choose Option E5071C-008

1

❍ No

Step 3: Would you like to add time domain analysis?

❍ Yes, choose Option E5071C-010
❍ No

Step 4: Would you like to add Measurement Wizard Assistant

(MWA) Software?

❍ Yes, choose Option E5071C-790
❍ No

Step 5: Would you like a high-stability time base?

❍ Yes, choose Option E5071C-1E5
❍ No, choose Option E5071C-UNQ

Step 6: Would you like any rack mount accessories?

❏ Rack mount kit only, choose Option E5071C-1CM
❏ Front handle kit only, choose Option E5071C-1CN
❏ Rack mount and front handle kit, choose

Option E5071C-1CP

Step 7: Would you like to add any accessories?

❏ Add a keyboard, choose Option E5071C-810
❏ Add a mouse, choose Option E5071C-820

Step 8: Choose calibration certificate options

❍ ISO 17025 compliant calibration certificate with test

data, choose Option E5071C-1A7

❍ ANSI Z540 compliant calibration certificate with test

data, choose Option E5071C-A6J

Step 9: Would you like to add external test set?

❍ Yes, order E5091A
❍ No

Step 10: Which would you like, a nine-port test set or a

thirteen/sixteen-port configurable test set?

❍ Nine-port, choose E5091A-009
❍ Thirteen/sixteen-port configurable test set,

choose E5091A-016

Step 11: Would you like any rack mount accessories

for the test set?

❏ Rack mount kit only, choose Option E5091A-1CM
❏ Front handle kit only, choose Option E5091A-1CN
❏ Rack mount and front handle kit, choose

Option E5091A-1CP

Step 12: Choose a language of the manual or delete a

manual set

❍ Add English manual set, choose Option E5091A-ABA
❍ Add Japanese manual set, choose Option E5091A-ABJ
❍ Delete a manual set, choose Option E5091A-0B0

Step 13: Would you like additional manual set?

❏ Extra English manual set, Choose Option E5091A-800

and specify quantity

❏ Extra Japanese manual set, Choose

Option E5091A-801 and specify quantity

Step 14: Would you like a calibration certificate (ISO

17025 compliant) with test data?

❍ Yes, choose Option E5091A-1A7
❍ No

1 Order the 82357B USB/GPIB interface at the same time if you would

like to control power meters with the E5071C. This will allow you
to conduct scalar mixer calibrations (SMC), power calibrations, or
receiver calibrations after power calibrations.

3

Agilent ENA
RF network analyzer

The ENA is an integrated RF network analyzer with two­or four-port S-parameter test set, synthesized RF source,

10.4-inch color LCD, and hard disc drives. Included with
the each ENA Series network analyzer is a 1-year
return-to-Agilent service warranty.

Options

Test ports, frequency range, and with or
without bias tees Options

Up to 4.5 GHz range

9 kHz to 4.5 GHz (without bias tees)

❍ Option E5071C-240 2-port S-parameter test set
❍ Option E5071C-440 4-port S-parameter test set

100 kHz to 4.5 GHz (with bias tees)

❍ Option E5071C-245 2-port S-parameter test set
❍ Option E5071C-445 4-port S-parameter test set

Up to 8.5 GHz range

9 kHz to 8.5 GHz (without bias tees)

❍ Option E5071C-280 2-port S-parameter test set
❍ Option E5071C-480 4-port S-parameter test set

100 kHz to 8.5 GHz (with bias tees)

❍ Option E5071C-285 2-port S-parameter test set
❍ Option E5071C-485 4-port S-parameter test set

Additional feature options

❏ Option E5071C-0081add frequency-offset measurement

capability
Adds frequency-offset sweep and harmonics
measurement capabilities.

❏

Option E5071C-010

add time domain analysis capability

Adds time domain transform and gating capabilities.

❏

Option E5071C-790 add Measurement Wizard Assistant (MWA)
Software
Adds Measurement Wizard Assistant (MWA) software to
further simplify your multiport measurements.

Frequency stability options

❍

Option E5071C-1E5 high stability time base
Adds the standard time base reference with a higher
stability unit.

❍

Option E5071C-UNQ

standard stability time base

Accessories options

❐

Option E5071C-1CM rack mount kit
Adds a rack mount kit (part number 5063-9216)

❐

Option E5071C-1CN front handle kit
Adds a front handle kit (part number 5063-9229)

❐

Option E5071C-1CP rack mount and front handle kit
Adds a rack mount kit and a handle kit
(part number 5063-9223)

❐

Option E5071C-810 Adds a keyboard

❐

Option E5071C-820 Adds a mouse

Certification option

❍ Option

E5071C-

1A7

ISO 17025 compliant calibration

❍ Option

E5071C-

A6J

ANSI Z540 compliant calibration

For online information about Agilent’s service and support
products visit: www.agilent.com/find/tm_services

1 Order the 82357B USB/GPIB interface at the same time if you would

like to control power meters with the E5071C. This will allow you
to conduct scalar mixer calibrations (SMC), power calibrations, or
receiver calibrations after power calibrations.

4

Measurement accessories

A complete line of RF test accessories can be found in
the Agilent RF and Microwave Test Accessories Catalog
(literature number 5968-4314EN) or by visiting

www.agilent.com/find/mta

Accessories are available in these connector types: 50 ohm
Type-N, 3.5 mm, 7 mm, and 75 ohm Type-N. Test port
cables and a calibration kit should be added for a complete
measurement system. A verification kit is used to verify
corrected system performance.

Test-port cables

Test port cables are used to connect the network analyzer
to the device under test.
❐ N6314A 50 ohm Type-N RF cable, 300 kHz to 9 GHz

Includes one 610 mm (24 in) cable with male connectors
(part number 8120-8862)

❐ N6315A 50 ohm Type-N RF cable, 300 kHz to 9 GHz

Includes one 610 mm (24 in) cable with both female and
male connectors (part number 8121-0027)

❐ 11500E cable, APC 3.5 mm (m), DC to 26.5 GHz

Includes one 610 mm (24 in) with male connectors.

3.5 mm (f) to 50 ohm Type-N (m) adapters (1250-1744)
are recommended to connect to the network analyzer’s
test ports.

❐ 11500F 150 cm cable, APC 3.5 mm (m), DC to 26.5 GHz

Includes one 1520 mm (60 in) with male connectors.

3.5 mm (f) to 50 ohm Type-N (m) adapters (1250-1744)
are recommended to connect to the network analyzer’s
test ports.

Calibration kits

Mechanical calibration kits include standards, such as
opens, shorts and loads, which are measured by the
network analyzer for increased measurement accuracy.

Electronic calibration (ECal) kits replace mechanical
calibration standards with one solid-state calibration
module that is controlled by the network analyzer to
present many different impedances to the test ports.
A full two-, three-, or four-port calibration can be performed
quickly with a single connection. This technique reduces
operator errors and connector wear and abrasion.

Choose a calibration kit for each connector type to be used.

Economy, includes:

• open standards (male and female)

• short standards (male and female)

• fixed-termination standards (male and female)

• in-series adapters

Standard, includes the devices in the economy kit and adds:

• connector tools

Precision, includes the devices in the economy kit and adds:

• 50 ohm airline for TRL calibration

• TRL adapters

• connector tools

For devices with 50 ohm Type-N connectors

Mechanical calibration kits

❐ 85032F economy: DC to 9 GHz. Includes:

85032-60017 Type-N (m) fixed load
85032-60018 Type-N (f) fixed load
85032-60013 Type-N (m) open
85032-60014 Type-N (f) open
85032-60016 Type-N (m) short
85032-60015 Type-N (f) short
❐ Option 85032F-100 adds:

85032-60021 Type-N (f) to Type-N (f) adapter

❐ Option 85032F-200 adds:

85032-60019 Type-N (m) to Type-N (m) adapter

❐ Option 85032F-300 adds:

85032-60020 Type-N (m) to Type-N (f) adapter

❐ Option 85032F-500 adds:

85054-60001 Type-N (f) to 7 mm adapter (two included)
85054-60009 Type-N (m) to 7 mm adapter (two included)

❐ 85054D economy: DC to 18 GHz. Includes:

85054-60025 Type-N (m) short
85054-60026 Type-N (f) short
85054-60027 Type-N (m) open
85054-60028 Type-N (f) open
85054-60031 Type-N (f) to 7 mm adapter
85054-60032 Type-N (m) to 7 mm adapter
85054-60037 Type-N (f) to Type-N (f) adapter
85054-60038 Type-N (m) to Type-N (m) adapter
85054-60046 Type-N (m) fixed load
85054-60047 Type-N (f) fixed load

Electronic calibration kits

❐ 85092C RF ECal: 300 kHz to 9 GHz, 2 ports. Includes:

❍ Option 85092C-MOF module with:

85092-60008 Type-N (f) to Type-N (m) RF ECal module

❍ Option 85092C-00M module with:

85092-60009 Type-N (m) to Type-N (m) RF ECal module

❍ Option 85092C-00F module with:

85092-60010 Type-N (f) to Type-N (f) RF ECal module

❐ Option 85092C-00A adds:

85054-60037 Type-N (f) to Type-N (f) adapter
85054-60038 Type-N (m) to Type-N (m) adapter

❐ N4431B 4-port RF ECal module: 300 kHz to 13.5 GHz,

4 ports.

❍ Option N4431B-020

Adds four Type-N, 50 ohm female module connectors

❐ Option N4431B-1A7

ISO 17025 compliant calibration

5

For devices with 3.5 mm or SMA connectors

Mechanical calibration kits

❐ 85033E economy: DC to 9 GHz. Includes:

85033-60016 3.5 mm (m) load
85033-60017 3.5 mm (f) load
85033-60018 3.5 mm (m) open
85033-60019 3.5 mm (f) open
85033-60020 3.5 mm (m) short
85033-60021 3.5 mm (f) short
8710-1761 torque wrench
❐ Option 85033E-100 adds:

85027-60005 3.5 mm (f) to 3.5 mm (f) adapter

❐ Option 85033E-200 adds:

85027-60007 3.5 mm (m) to 3.5 mm (m) adapter

❐ Option 85033E-300 adds:

85027-60006 3.5 mm (m) to 3.5 mm (f) adapter

❐ Option 85033E-400 adds:

1250-1744 3.5 mm (f) to 50 ohm Type-N (m) adapter
1250-1743 3.5 mm (m) to 50 ohm Type-N (m) adapter
1250-1745 3.5 mm (f) to 50 ohm Type-N (f) adapter
1250-1750 3.5 mm (m) to 50 ohm Type-N (f) adapter

❐ Option 85033E-500 adds:

1250-1746 3.5 mm (m) to 7 mm adapter (two included)
1250-1747 3.5 mm (f) to 7 mm adapter (two included)

❐ 85052C precision TRL: 45 MHz to 26.5 GHz. Includes:

00902-60003 3.5 mm (m) fixed load
00902-60004 3.5 mm (f) fixed load
85052-60006 3.5 mm (m) short
85052-60007 3.5 mm (f) short
85052-60008 3.5 mm (m) open
85052-60009 3.5 mm (f) open
85052-60032 3.5 mm (f) to 3.5 mm (f) adapter
85052-60033 3.5 mm (m) to 3.5 mm (m) adapter
85052-60034 3.5 mm (f) to 3.5 mm (m) adapter
85052-60035 3.5 mm short TRL line
85052-60036 3.5 mm long TRL line

❐ 85052D economy: DC to 26.5 GHz. Includes:

00902-60003 3.5 mm (m) fixed load
00902-60004 3.5 mm (f) fixed load
85052-60006 3.5 mm (m) short
85052-60007 3.5 mm (f) short
85052-60008 3.5 mm (m) open
85052-60009 3.5 mm (f) open
85052-60012 3.5 mm (f) to 3.5 mm (f) adapter
85052-60013 3.5 mm (f) to 3.5 mm (m) adapter
85052-60014 3.5 mm (m) to 3.5 mm (m) adapter

Electronic calibration kits

❐ 85093C RF ECal: 300 kHz to 9 GHz, 2 ports. Includes:

❍ Option 85093C-MOF module with:

85093-60008 3.5 mm (f) to 3.5 mm (m) RF ECal module

❍ Option 85093C-00M module with:

85093-60009 3.5 mm (m) to 3.5 mm (m) RF ECal module

❍ Option 85093C-00F module with:

85093-60010 3.5 mm (f) to 3.5 mm (f) RF ECal module

❐ Option 85093C-00A adds:

85052-60012 3.5 mm (f) to 3.5 mm (f) adapter
85052-60014 3.5 mm (m) to 3.5 mm (m) adapter

❐ N4431B 4-port RF ECal module: 300 kHz to 13.5 GHz,

4 ports.

❍ Option N4431B-010

Adds four 3.5 mm female module connectors

❐ Option N4431B-1A7

ISO 17025 compliant calibration

Adapters

❐ 11853A 50 ohm Type-N accessory kit. Includes:

1250-1472 Type-N (f) to Type-N (f) adapter (two included)
1250-1475 Type-N (m) to Type-N (m) adapter (two included)
11511A Type-N (f) short
11512A Type-N (m) short

❐ 11878A Type-N to 3.5 mm adapter kit. Includes:

1250-1744 3.5 mm (f) to 50 ohm Type-N (m) adapter
1250-1743 3.5 mm (m) to 50 ohm Type-N (m) adapter
1250-1745 3.5 mm (f) to 50 ohm Type-N (f) adapter
1250-1750 3.5 mm (m) to 50 ohm Type-N (f) adapter

❐ 11524A 7 mm to Type-N (f) adapter
❐ 11525A 7 mm to Type-N (m) adapter

For devices with 75 ohm Type-N connectors

Mechanical calibration kits

❐ 85036B DC to 3 GHz, includes:

00909-60019 75 ohm Type-N (m) broadband load
00909-60020 75 ohm Type-N (f) broadband load
85036-60012 75 ohm Type-N (m) short
85036-60011 75 ohm Type-N (f) short
85032-60007 75 ohm Type-N (m) open
85032-20001 75 ohm Type-N (f) open body
85036-60010 75 ohm Type-N (f) open center conductor

extender
85036-60013 75 ohm Type-N (m) to (m) adapter
85036-60014 75 ohm Type-N (f) to (f) adapter
85036-60015 75 ohm Type-N (m) to (f) adapter

❐ 85036E DC to 3 GHz, includes:

00909-60019 75 ohm Type-N (m) broadband load
85036-60016 75 ohm Type N (m) combined open/short

Adapters

❐ 11852B Minimum-loss pad

❍ Option 11852B-004 Type-N connectors, 50 ohm (m) to

75 ohm (f)

Calibration must be done with a 75 ohm calibration kit with
a 11852B minimum-loss pad, and impedance conversion to
75 ohm with the ENA’s fixture simulator function is required.

6

Power Limiters

❐ N9355B power limiter, 10 dBm limiting threshold,

10 MHz to 18 GHz, Type-N

❐ N9356B power limiter, 25 dBm limiting threshold,

10 MHz to 18 GHz, Type-N

❐ N9355C power limiter, 10 dBm limiting threshold,

10 MHz to 26.5 GHz, 3.5 mm

❐ N9356C power limiter, 25 dBm limiting threshold,

10 MHz to 26.5 GHz, 3.5 mm

DC Blocks

❏ N9398C DC block, 16 V maximum working voltage,

50 kHz to 26.5 GHz

❏ N9399C DC block, 50 V maximum working voltage,

700 kHz to 26.5 GHz

❏ 11742A, 50 V maximum working voltage,

45 MHz to 26.5 GHz

Amplifiers

❏ 87405B pre-amplifier, 24 dB gain, 10 MHz to 4 GHz
❏ 87405C pre-amplifier, 25 dB gain, 100 MHz to 18 GHz
❏ 87415A amplifier, 25 dB gain, 2 to 8 GHz
❏ 83006A amplifier, 20 dB gain, 10 MHz to 26.5 GHz

Attenuators

❏ 8491A fixed attenuator, DC to 12.4 GHz, Type-N
❏ 8493A fixed attenuator, DC to 12.4 GHz, SMA

RF & Microwave Switches

❏ N1810TL SPDT switch, terminated, DC to 20 GHz
❏ N1810UL SPDT switch, unterminated, DC to 20 GHz
❏ 87104B SP4T switch, terminated, DC to 20 GHz
❏ 87106B SP6T switch, terminated, DC to 20 GHz

Power meters and sensors

1

Recommended for source output power calibration.

❏ E4416A single-channel power meter
❏ E4417A dual-channel power meter
❏ E4418B single-channel power meter
❏ E4419B dual-channel power meter
❏ 8482A power sensor, 100 kHz to 4.2 GHz, Type-N (m),

100 mW

❏ E9304A-H18 power sensor, 9 kHz to 18 GHz, Type-N (m),

100 mW

❏ E4412A CW power sensor, 10 MHz to 18 GHz, Type-N

(m), 200 mW

Probe

❏ 85024A high-frequency probe, 300 kHz to 3 GHz

General accessories

System racks and cases

❏ 5063-9229 handle kit, may be ordered as option 1CN

(two included)

❏ 5063-9216 rack mount kit, for use without handles:

may be ordered as option 1CM

❏ 5063-9223 rack mount kit, for use with previously

supplied handles; may be ordered as option 1CP

❏ E3663AC rack mount rail kit, for use with 5063-9216

or 5063-9223

❏ 9211-2658 transit case

Interface cables

The following GPIB cables can be used to connect the network
analyzer with an external device such as a computer

❏ 10833A GPIB cable, 1.0 m (3.3 ft)
❏ 10833B GPIB cable, 2.0 m (6.6 ft)
❏ 10833C GPIB cable, 3.0 m (9.9 ft)
❏ 10833D GPIB cable, 0.5 m (1.6 ft)

Monitors

❏ VGA-compatible monitor

Printers

❏ Hewlett Packard® 7830 and 7850 via USB port

Please refer to the following information for the
latest recommended printer information.

http://www.agilent.com/find/ctdkobe_printers

Upgrade kits

Upgrade kits for the E5071C

Upgrade kits are available to add options after initial
purchase. To order an upgrade kit for a ENA, order
E5071CU, then indicate the option to be added:
❏ E5071CU-018 hard disk drive kit

For the other software capability upgrades, order
an upgrade kit with stand-alone product number
E5003A/4A or 5A, then indicate the option to be added:

❏ E5003A-1FP Frequency-offset mode for E5071C
❏ E5004A-1FP Time domain analysis for E5071C
❏ E5005A-1FP Measurement Wizard assistant software

for E5071C

Customers can install these software upgrade options.

1 Order the 82357B USB/GPIB interface to control a power meter

by E5071C.

7

Agilent E5091A multiport test set

The E5091A is a multiport test set used with 4-port ENA
Series network analyzers to expand the number of test ports
up to sixteen.

Options

Test set configuration options

❍ Option E5091A-009 9-port configuration

Includes nine test ports to the device under test and four
interconnection ports to an analyzer.

❍ Option E5091A-016 13/16-port configurable test set

configuration
Includes thirteen to sixteen configurable test ports to
the device under test and four interconnection ports to
the analyzer.

Accessories options

❏ Option E5091A-1CM rack mount kit

Adds a rack mount kit (part number 5063-9212) for use
without handles.

❏ Option E5091A-1CN front handle kit

Adds a front handle kit (part number 5063-9226) for use
with analyzer handles.

❏ Option E5091A-1CP rack mount and front handle kit

Adds a rack mount and a handle kit (part number
5063-9219) for use with analyzer handles.

Included documentation options

❍ Option E5091A-ABA add English manual set
❍ Option E5091A-ABJ add Japanese manual set
❍ Option E5091A-0B0 delete manual set

Additional documentation options

❏ Option E5091A-800 extra English manual set
❏ Option E5091A-801 extra Japanese manual set

Certification option

❏ Option E5091A-1A7 ISO 17025 compliant calibration

Literature and information

ENA Series RF Network Analyzers Brochure

Literature number 5989-5478EN

ENA Series RF Network Analyzers Data Sheet

Literature number 5989-5479EN

Agilent Network Analyzer Selection Guide

Literature number 5989-5481EN

ENA-L RF Network Analyzers Brochure

Literature number 5989-0167EN

ENA-L RF Network Analyzers Data Sheet

Literature number 5989-0018EN

Test Solutions for Multiport and
Balanced Devices Selection Guide

Literature number 5988-2461EN

Application and product notes

Introduction to the Fixture Simulator Function of the
ENA Series RF Network Analyzers: Network De-embed­ding/Embedding and Balanced Measurement,
Product Note E5070/71-1

Literature number 5988-4923EN

Evolution of Test Automation Using Built-in VBA with
the ENA Series RF Network Analyzers,
Product Note E5070/71-2

Literature number 5988-6192EN

On-wafer Multiport Calibration Using the ENA Series
RF Network Analyzer with the Cascade Microtech
Probing System,
Product Note E5070/71-3

literature number 5988-5886EN

In-Fixture Characterization Using the ENA Series RF
Network Analyzer with Cascade Microtech Probing
System, Product Note E5070/71-4

Literature number 5988-6522EN

Characterizing Differential Amplifiers with
True Differential Signals

Application Note 1463
literature number 5988-9463EN

Improve the Circuit Evaluation Efficiency of
Wireless LAN Chip Set Design

Application Note 1463-2
Literature number 5988-9803EN

Differential S-parameter Measurements of PCI Express
Connectors using the ENA Series Network Analyzer

Application Note 1463-3
Literature number 5988-9848EN

On-Wafer Impedance Measurements using the ENA
and the Impedance Parameter Display Software

Application Note 1472
Literature number 5989-0033EN

Impedance Characteristic Evaluation of SMD by Using
the ENA with Inter-Continental Microwave (ICM)

Application Note 1463-5
Literature number 5989-0547EN

Accurate Mixer Measurements Using the
Frequency-Offset Mode

Application Note 1463-6
Literature number 5989-1420EN

Accurate Mixer Conversion Loss
Measurement Techniques

Application Note 1463-7
Literature number 5989-1986EN

7 Reasons to Migrate from Your 8753 to an ENA
Network Analyzer

Application Note 1478
Literature number 5989-0206EN

www.agilent.com

For more information on Agilent Technologies’ products, applications or services,

please contact your local Agilent office. The complete list is available at:

www.agilent.com/find/contactus

Phone or Fax

United States: Korea:

(tel) 800 829 4444 (tel) [phone]
(fax) 800 829 4433 (fax) [phone]

Canada: Latin America:

(tel) 877 894 4414 (tel) [phone]
(fax) 800 746 4866 Taiwan:
China: (tel) 0800 047 866
(tel) 800 810 0189 (fax) 0800 286 331
(fax) 800 820 2816 Other Asia Pacific

Europe: Countries:

(tel) 31 20 547 2111 (tel) (65) 6375 8100
Japan: (fax) (65) 6755 0042
(tel) (81) 426 56 7832 Email: [e-mail]

(fax) (81) 426 56 7840 Contacts revised: 11/08/06

Product specifications and descriptions in this document subject to change
without notice.

© Agilent Technologies, Inc. 2006, 2007
Printed in USA, January 29, 2007
5989-5480EN

www.agilent.com/find/open

Agilent Open simplifies the process of connecting and programming test
systems to help engineers design, validate and manufacture electronic
products. Agilent offers open connectivity for a broad range of
system-ready instruments, open industry software, PC-standard I/O
and global support, which are combined to more easily integrate
test system development.

www.agilent.com/find/emailupdates

Get the latest information on the products and applications you select.

Key web resources

For additional information on the ENA Series, visit:

www.agilent.com/find/ena

is the US registered trademark of the LXI Consortium.

Remove all doubt

Our repair and calibration services will get your equipment
back to you, performing like new, when promised.
You will get full value out of your Agilent equipment
throughout its lifetime. Your equipment will be serviced
by Agilent-trained technicians using the latest factory
calibration procedures, automated repair diagnostics
and genuine parts. You will always have the utmost
confidence in your measurements.

Agilent offers a wide range of additional expert test
and measurement services for your equipment,
including initial start-up assistance onsite education
and training, as well as design, system integration,
and project management.

For more information on repair and calibration
services, go to

www.agilent.com/find/removealldoubt

Agilent Email Updates

Agilent

Open