Agilent E1416A Data Sheet

Agilent E1416A Power Meter
Data Sheet
1-Slot, C-size, message based
Single channel
± 0.02 dB or ± 0.5% instrumentation accuracy
100 kHz to 110 GHz, sensor dependent
1 mW power reference
Description
The Agilent Technologies E1416A Power Meter is a C-size, 1-slot, message-based VXI module. It is a high-
performance, single-channel, programmable, average power meter compatible with the Agilent 8480 family of thermocouple and diode power sensors.
This power meter makes accurate and reliable average power measurements. With its powerful programming capability, exceptional accuracy and reliability, it lets you measure your test signal with speed, precision, and confidence!
Agilent E1416A
Refer to the Agilent Technologies Website for instrument driver availability and downloading instructions, as well as for recent product updates, if applicable.
Product Specifications
Characteristics Frequency: Allows entry of test signal frequency
Offset: Allows measurement to be offset by
Resolution: Selection of 0.1, 0.01, and 0.001 dB.
Averaging: Selectable from 1 to 1024 readings
Duty cycle: Displays peak power representation of
Sensor tables: Allows entry and storage of up to 10
Save/recall states: Saves and recalls 10 complete
General
Frequency: 100 kHz to 110 GHz sensor dependent
Power range: –70 to + 44 dBm
Dynamic range: 50 dB in 10 dB ranges
Results units: W, dBm
Accuracy: ± 0.02 dB or ± 0.5% (instrument,
Zero set: ± 0.5% of full scale on most sensitive
Power reference: 1.00 mW
Functions
Power: Yes
Offset: Yes
Averaging: Yes
Duty cycle: Yes
for cal factor selection
± 99.99 dB
Auto Filter Mode automatically selects the required number of averages for the chosen range and resolution
powers of 2)
measured RMS power for rectangular pulses
sensor cal factor tables versus frequency
E1416A operating states
(100 pW to 25 W)
sensor dependent
(absolute)
, %, dB
relative
absolute mode). In ranges of 4 or 5, add sensor linearity percentage
range. Divide by 10 for each higher range, ± 1 count
(50 MHz oscillator factory
set to ± 0.7% traceable to NIST)
General Specifications
VXI Characteristics
VXI device type: Message based
Size: C
Slots: 1
Connectors: P1/2
Shared memory: n/a
VXI buses: n/a
(in
Instrument Drivers - See the Agilent Technologies Website (http://www.agilent.com/find/inst_drivers) for driver availability and downloading.
Command module firmware: n/a
Command module firmware rev: n/a
I-SCPI Win 3.1: n/a
I-SCPI Series 700: n/a
C-SCPI LynxOS: n/a
C-SCPI Series 700: n/a
Panel Drivers: Yes
VXI
,
plug&play
VXI
plug&play
VXI
plug&play
Module Current
+5 V: 1 0.1 +12 V: 00 –12 V: 00 +24 V: 0.1 0.01 –24 V: 0.1 0.01 –5.2 V 00 –2 V: 00
Cooling/Slot
Watts/slot: 12.20
P mm H
Air Flow liter/s: 0.20
Win Framework: Yes
Win 95/NT Framework: Yes
HP-UX Framework: No
O: 1.00
2
I
PM
I
DM
2
Ordering Information
Description Product No.
Power Meter, C-Size VXI E1416A Delete Cable E1416A 004 Service Support Kit E1416A 915 Additional User Manual E1416A 916 3 Yr. Retn. to Agilent to 1 Yr. OnSite Warr. E1416A W01 5-ft (1.5 m) Power Sensor Cable 11730A 10-ft (3.0 m) Power Sensor Cable 11730B 20-ft (6.1 m) Power Sensor Cable 11730C 50-ft (15.2 m) Power Sensor Cable 11730D 100-ft (30.5 m) Power Sensor Cable 11730E 200-ft (61.0 m) Power Sensor Cable 11730F High-power Thermocouple Power Sensor 8481B Mil Std 45662A Calibration Certification 8481B 1BN Extra Manual Set 8481B 910 High-power Sensor, 100 kHz to 4.2 GHz 8482B Mil Std 45662A Calibration Certification 8482B 1BN 3-watt Power Sensor, 10 MHz to 18 GHz 8481H Mil Std 45662A Calibration Certification 8481H 1BN Extra Manual Set 8481H 910 3-watt Power Sensor, 100 kHz to 4.2 GHz 8482H Mil Std 45662A Calibration Certification 8482H 1BN Extra Manual Set 8482H 910 Power Sensor, 50 MHz to 26.5 GHz 8485A Specified Performance for 0.05-33 GHz 8485A 033 Mil Std 45662A Calibration Certification 8485A 1BN Extra Manual Set 8485A 910 Power Sensor, 10 MHz to 18 GHz 8481A APC-7 Connector 8481A 001 Japanese Operating Manual 8481A 030 Mil Std 45662A Calibration Certification 8481A 1BN Extra Manual Set 8481A 910 Power Sensor, 100 kHz to 4.2 GHz 8482A Japanese Operating Manual 8482A 030 Mil Std 45662A Calibration Certification 8482A 1BN Extra Manual Set 8482A 910 75-ohm Power Sensor, 100 kHz to 2 GHz 8483A Japanese Operating Manual 8483A 030 Mil Std 45662A Calibration Certification 8483A 1BN Extra Manual Set 8483A 910 Power Sensor, 26.5-40 GHz R8486A Power Sensor, 33-50 GHz Q8486A Power Sensor, 50 MHz to 50 GHz 8487A V-band Power Sensor, 50 GHz to 75 GHz V8486A W-band Power Sensor W8486A Diode Power Sensor, 10 MHz to 18 GHz 8481D Mil Std 45662A Calibration Certification 8481D 1BN Extra Manual 8481D 910 High-sensitivity Diode Power Sensor 8485D Specified Performance for 0.05-33 GHz 8485D 033 Mil Std 45662A Calibration Certification 8485D 1BN Extra Manual 8485D 910 Diode Power Sensor, 50 MHz to 50 GHz 8487D Waveguide Power Sensor, 26.5-40 GHz R8486D Waveguide Power Sensor, 33-50 GHz Q8486D
3
The E1416A i s functionally equivalent to the Agilent 437B
(1)
or 70100A. It is
compatible with all 8480 series sensors (and 11722A) as shown here.
(1)
The Agilent 437B has been obsoleted and replaced by the E4418B.
4
Agilent Technologies’ Test and Measurement Support, Services, and Assistance
Agilent Technologies aims to maximize the value you receive, while minimizing your risk and problems. We strive to ensure that you get the test and measurement capabilities you paid for and obtain the support you need. Our extensive support resources and services can help you choose the right Agilent products for your applications and apply them successfully. Every instrument and system we sell has a global warranty. Support is available for at least five years beyond the production life of the product. Two concepts underlie Agilent’s overall support policy: "Our Promise" and "Your Advantage."
Our Promise
Our Promise means your Agilent test and measurement equipment will meet its advertised performance and functionality. When you are choosing new equipment, we will help you with product information, including realistic performance specifications and practical recommendations from experienced test engineers. When you use Agilent equipment, we can verify that it works properly, help with product operation, and provide basic measurement assistance for the use of specified capabilities, at no extra cost upon request. Many self-help tools are available.
Your Advantage
Your Advantage means that Agilent offers a wide range of additional expert test and measurement services, which you can purchase according to your unique technical and business needs. Solve problems efficiently and gain a competitive edge by contracting with us for calibration, extra-cost upgrades, out-of-warranty repairs, and on-site education and training, as well as design, system integration, project management, and other professional engineering services. Experienced Agilent engineers and technicians worldwide can help you maximize your productivity, optimize the return on investment of your Agilent instruments and systems, and obtain dependable measurement accuracy for the life of those products.
By internet, phone, or fax, get assistance with all your test & measurement needs.
Online assistance:
www.agilent.com/find/assist
Phone or Fax
United States: (tel) 1 800 452 4844
Canada: (tel) 1 877 894 4414 (fax) (905) 282 6495
China: (tel) 800 810 0189 (fax) 1 0800 650 0121
Europe: (tel) (31 20) 547 2323 (fax) (31 20) 547 2390
Japan: (tel) (81) 426 56 7832 (fax) (81) 426 56 7840
Korea: (tel) (82 2) 2004 5004 (fax) (82 2) 2004 5115
Latin America: (tel) (305) 269 7500 (fax) (305) 269 7599
Taiwan: (tel) 080 004 7866 (fax) (886 2) 2545 6723
Other Asia Pacific Countries: (tel) (65) 375 8100 (fax) (65) 836 0252 Email: tm_asia@agilent.com
Product specifications and descriptions in this document subject to change without notice.
© Agilent Technologies, Inc. 2001 Printed in USA September 1, 2001
5965 5564E
Loading...