Agilent E1410A Technical Specifications

Download

PDFINFO H5 56 1- 0 1

6.5-Digit Multimeter, HighAccuracy, C-Size HP E1410A

Technical Specifications

●

1-Slot, C-size, message based

●

Vdc/ac, 2- & 4-wire Ω

●

Noise rejection with long integration times/ guarding

●

Quality measurements with high common mode rejection

●

True RMS from 20 Hz to 1 MHz

●

Software calibration

Description

The HP E1410A 6.5-Digit Multimeter is a C-size, 1-slot, message-based VXI module. It offers DC voltage and

resistance measurements at rates over 1,450 readings/s in the 3.5-digit mode or normal mode rejection of up to 90 dB in the 6.5-digit mode. You can measure true RMS AC signals from 20 Hz to 1 MHz with programmable settling times. Offset compensated ohms allows for quality resistance measurements by eliminating the effect of small series voltage offsets. Temperature measurements using thermistors and RTDs are supported. Resolution, accuracy, and noise rejection may be set to optimize measurements speed. Extensive triggering is available.

HP E1410A

Refer to the HP Website for instrument driver availability and downloading instructions, as well as for recent product updates, if applicable.

PDFINFO H5 56 1- 0 2

Accuracy

Choose the resolution, accuracy, and noise rejection you need. Fast function-range changes allow you to optimize measurement speeds. For low-level signals, long integration times and the system guard yield the most accurate measurements possible. Integration times from 100 power line cycles to 0.0005 power line cycles are selectable for all functions. Resolution from

6.5 to 3.5 digits is selectable as a function of integration time.

Product Specifications

Reading Rate/Resolution

Max. reading rate: 1.45 k

Auto zero off, fixed range, delay 0, AC slow filter on, and offset compensation off.

Flexible Triggering

The DMM has extensive triggering capabilities, including synchronization with external devices. You can access the external trigger and voltmeter complete signals from the front panel or VXIbus (TTL trigger lines).

Typical Reading Rates (rdgs/s)

2.0 s 1.67 s 200 ms 167 ms 20 ms 16.7 ms 2.0 ms 1.67 ms 100 µs 10 µs

DC voltage 0.4 0.49 4.0 4.9 47 56 312 360 1250 1450 Four-wire resistance 0.4 0.49 4.0 4.9 47 56 312 360 1250 1450 AC voltage 0.17 0.2 0.65 0.7 1.0 1.0 1.0 1.0 1.0 1.0

Aperture

Resolution (bits/digits)

2.0 s 1.67 s 200 ms 167 ms 20 ms 16.7 ms 2.0 ms 1.67 ms 100 µs 10 µs

Binary bits: ± 21.5 ± 21.5 ± 21.5 ± 21.5 ± 21.5 ± 21.5 ± 18.2 ± 18.2 ± 14.9 ± 11.5 Decimal digits: 6.5 6.5 6.5 6.5 6.5 6.5 5.5 5.5 4.5 3.5

Aperture

Noise Rejection (dB)

Noise Rejection Conditions: 1 kΩ imbalance in low lead. NMR is for specified frequencies ± 0.08%.

DC Voltage & Resistance:

2.0 s 1.67 s 200 ms 167 ms 20 ms 16.7 ms 2.0 ms 1.67 ms 100 µs 10 µs

DC Common mode rejection 140 dB 140 dB 140 dB 140 dB 140 dB 140 dB 140 dB 140 dB 140 dB 140 dB 50 Hz Power line cycles 100— 10 —1 — —— ——

Normal mode (50 Hz) rejection 90 dB 0 dB 80 dB 0 dB 60 dB 0 dB 0 dB 0 dB 0 dB 0 dB 60 Hz Power line cycles — 100 — 10 — 1 — — — — Normal mode (60 Hz) rejection 0 dB 90 dB 0 dB 80 dB 0 dB 60 dB 0 dB 0 dB 0 dB 0 dB 400 Hz Power line cycles 800— 80—8 — —— —— Normal mode (400 Hz) rejection 90 dB 0 dB 80 dB 0 dB 60 dB 0 dB 0 dB 0 dB 0 dB 0 dB

AC voltage

2.0 s 1.67 s 200 ms 167 ms 20 ms 16.7 ms 2.0 ms 1.67 ms 100 µs 10 µs

DC to 60 Hz Common mode rejection >86 dB >86 dB >86 dB >86 dB >86 dB >86 dB >86 dB >86 dB >86 dB >86 dB

PDFINFO H5 56 1- 0 3

DC Voltage Resolution/Accuracy

Accuracy Conditions: Auto-zero on. One hour warmup. Temperature within ± 5 °C of temperature at calibration (module calibrated at 18-28 °C).

Range Input Resistance Resolution vs Aperture

(Volts)

20/16.7 ms 10 µs 20/16.7 ms 10 µs

30 mV >10 GΩ 10 nV 10 µV 0.0040% + 3.9 µV 0.0040% + 60 µV 300 mV >10 GΩ 100 nV 100 µv 0.0025% + 4.0 µV 0.0025% + 400 µV 3 V >10 GΩ 1 µv 1 mV 0.0017% + 9.0 µV 0.0017% + 4.0 mV 30 V 10 MΩ ± 1% 10 µv 10 mV 0.0035% + 200 µV 0.0035% + 40 mV 300 V 10 MΩ± 1% 100 µv 100 mV 0.0063% + 700 µV 0.0050% + 400 mV

DC voltage: 300 V Voltage accuracy (DC): 0.002%

90-Day Accuracy vs Aperture

± (% of Reading + Volts)

Four-Wire Resistance

Source

Maximum Open

Current

Range 20/16.7 ms 10 µs 20/16.7 ms 10 µs

30 Ω 1 mA 12 V 10 µΩ 10 mΩ 0.0065% + 4.5 mΩ 0.0065% + 60 mΩ 300 Ω 1 mA 12 V 100 µΩ 100 mΩ 0.0045% + 4.5 mΩ 0.0045% + 400 mΩ 3 kΩ 1 mA 12 V 1 mΩ 1 Ω 0.0035% + 7 mΩ 0.0035% + 4 Ω 30 kΩ 100 µA 12 V 10 mΩ 10 Ω 0.0035% + 70 mΩ 0.0035% + 40 Ω 300 kΩ 10 µA 12 V 100 mΩ 100 Ω 0.0040% + 900 mΩ 0.0040% + 400 Ω 3 MΩ 1 µA 12 V 1 Ω 1 kΩ 0.0055% + 16 Ω 0.0055% + 5 kΩ 30 MΩ 100 nA 8.5 V 10 Ω 10 kΩ 0.0250% + 930 Ω 0.0250% + 50 kΩ 300 MΩ 100 nA 8.5 V 100 Ω 100 kΩ 1.6% + 100 kΩ not specified 3 GΩ 100 nA 8.5 V 1 kΩ 1 MΩ 16% + 1 MΩ not specified

Circuit Voltage

Resolution vs. Aperture

(Volts)

90-Day Accuracy vs. Aperture

± (% of reading = Ω)

Accuracy conditions: Auto-zero on, one hour warmup. On 300 MΩ and 3 GΩ ranges, specification applies to two-wire Ω only, with inputs >10% of full scale and within 24 hrs of internal calibration. Temperature within ± 5 °C of temperature at calibration (module calibrated at

18-28 °C).

2/4-wire Ω: 3 G Ω

True RMS AC Voltage (AC coupled)

Crest Factor: 3.5 at full scale. Accuracy Conditions: Sine wave inputs >10% of full scale. DC component <10% of AC component. AC slow fil-

ter on. Auto-zero on. One hour warmup. Temperature within ± 5 °C of temperature at calibration (module calibrated at 18-28 °C).

Range (RMS)

30 mV 1 MΩ ± 1%,

300 mV 1 MΩ ± 1%,

3 V 1 MΩ ± 1%,

30 V 1 MΩ ± 1%,

300 V 1 MΩ ± 1%,

Input Impedance

< 90 pF

Resolution Aperture = 20/16.7 ms

10 nV 20 Hz-45 Hz

100 nV 20-45 Hz

1 µV 20-45 Hz

10 µV 20-45 Hz

100 µV 20-45 Hz

Frequency 90-Day Accuracy

45-100 Hz 100 Hz-20 kHz 20-100 kHz 100-300 kHz 300 kHz-1 MHz

45-100 Hz 100 Hz-20 kHz 20-100 kHz 100 kHz-1 MHz

± (% of reading + Volts) Aperture = 20/16.7 ms

0.58% + 37.3 µV

0.23% + 37.3 µV

0.15% + 37.3 µV

0.68% + 47.1 µV

3.35% + 123 µV

10.35% + 691 µV

0.58% + 133 µV

0.23% + 133 µV

0.15% + 133 µV

0.68% + 231 µV

3.35% + 991 µV

10.35% + 6.67 mV

0.58% + 1.33 mV

0.23% + 1.33 mV

0.15% + 1.33 mV

0.68% + 2.31 mV

3.35% + 9.91 mV

10.35% + 66.7 mV

0.58% + 13.3 mV

0.23% + 13.3 mV

0.15% + 13.3 mV

0.68% + 23.1 mV

3.35% + 99.1 mV

10.35% + 667 mV

0.64% + 133 mV

0.29% + 133 mV

0.21% + 133 mV

1.08% + 390 mV not specified

PDFINFO H5 56 1- 0 4

AC voltage: 300 V Voltage accuracy (AC): 0.194%

Frequency and Period

Sensitivity (sinewave): 10 mV rms Trigger level: Triggers and counts on zero crossings Conditions: 0-55 °C

Frequency Range Period Range 1 Year Accuracy ±

10-400 Hz 0.1-0.025 s 0.05% 400 Hz-1.5 MHz 0.025 s-667 ns 0.01%

(% of Reading)

Timing/Synchronization

Timer/pacer:

Timer range: 600 µs to 2100 s Resolution: 1.0 µs

Programmable delay:

Delay range: 0 to 2100 s

Resolution: 1.0 µs

External trigger:

Trigger condition (programmable): Negative or positive edge

Minimum pulse width: 10 ns

Memory

Reading storage: 4,096 readings Multimeter state memory: 10 states

Instrument Drivers

See the HP Website (http://www.hp.com/go/inst_drivers) for driver availability and downloading.

Command module firmware: n/a

Command module firmware rev: n/a

I-SCPI Win 3.1: n/a I-SCPI Series 700: n/a C-SCPI LynxOS: n/a C-SCPI Series 700: n/a HP Panel Drivers: Yes

plug&play

VXI Framework: Yes

plug&play

VXI Framework: Yes

plug&play

VXI Framework: No

Win

Win 95/NT

HP-UX

Module Current

+5 V: 1 0.1 +12 V: 0.5 0.15 –12 V: 00 +24 V: 00 –24 V: 00 –5.2 V 00 –2 V: 00

Functions

Idc: — Iac: — Frequency: 1.5 MHz

Period: 1 µs

Temp.: Tm, RTD

General Specifications

VXI Characteristics

VXI device type: Message based Size: C Slots: 1 Connectors: P1/2 Shared memory: Yes VXI busses: TTL Trigger Bus C-size compatibility: n/a

Cooling/Slot

Watts/slot: 11.00

∆P mm H

Air Flow liter/s: 0.92

O: 0.15

Ordering Information

Description Product No.

6.5-Digit Multimeter, High Accuracy HP E1410A Service Manual HP E1410A 0B3 Mil Std 45662A Calibration w/Test Data HP E1410A 1BP Japan - Japanese Localization HP E1410A ABJ 3 Yr. Retn. to HP to 1 Yr. OnSite Warr. HP E1410A W01

PDFINFO H5 56 1- 0 5

Related Literature

1998 Test System and VXI Products Data Book,

HP Pub. No. 5966-2812E

1999 Test System and VXI Products Catalog,

HP Pub. No. 5968-3698

Warranty

Standard Hewlett-Packard VXIbus hardware products are warranted against defects in materials and workmanship for a period of three years unless otherwise noted. HP software and firmware products that are designated by HP for use with a hardware product, when properly installed on that hardware product, are warranted not to fail to execute their programming instructions due to defects in materials and workmanship.

For more information about HewlettPackard test & measurement products, applications, services, and for a current sales office listing, visit our website,

http://www.hp.com/go/tmdir

. You can also

contact one of the following centers and ask for a test & measurement sales representative.

United States:

Hewlett-Packard Company Test and Measurement Call Center P.O. Box 4026 Englewood, CO 80155-4026 1 800 452 4844

Canada:

Hewlett-Packard Canada Ltd. 5150 Spectrum Way Mississauga, Ontario L4W 5G1 (905) 206 4725

For a complete and detailed warranty statement please see

Test System and VXI Products Data Book

the HP

or visit the

HP Website at http://www.hp.com/go/vxi.

Website Directory

HP VXI Product Information

http://www.hp.com/go/vxi

HP VXI Channel Partners

http://www.hp.com/go/vxichanpart

HP VEE Application Website

http://www.hp.com/go/hpvee

Data Acquisition and Control Website

http://www.hp.com/go/data_acq

HP Instrument Driver Downloads

http://www.hp.com/go/inst_drivers

Electronics Manufacturing Test Solutions

http://www.hp.com/go/manufacturing

Europe:

Hewlett-Packard European Marketing Centre P.O. Box 999 1180 AZ Amstelveen The Netherlands (31 20) 547 9900

Japan:

Hewlett-Packard Japan Ltd. Measurement Assistance Center 9-1, Takakura-Cho, Hachioji-Shi, Tokyo 192, Japan Tel: (81) 426 56 7832 Fax: (81) 426 56 7840

Latin America:

Hewlett-Packard Latin American Region Headquarters 5200 Blue Lagoon Drive, 9th Floor Miami, Florida 33126 U.S.A. Tel: (305) 267-4245

(305) 267-4220

Fax: (305) 267-4288

Australia/New Zealand:

Hewlett-Packard Australia Ltd. 31-41 Joseph Street Blackburn, Victoria 3130 Australia 1 800 629 485

Asia Pacific:

Hewlett-Packard Asia Pacific Ltd. 17-21/F Shell Tower, Times Square, 1 Matheson Street, Causeway Bay, Hong Kong Tel: (852) 2599 7777 Fax: (852) 2506 9285

Agilent E1410A Technical Specifications

Specifications and Main Features

Frequently Asked Questions

User Manual