Agilent 85025B Specifications Sheet

lrrtcrfacr:, product himl copy plot<:
HF 744OA Opt~a~ 002.
I If’ 7470A Optinn OfIZ.
HF 7475A Option C02.
I If’ 7550A Optinn 002.
I IP 7O’XlA Optmn cm.
hinter:
Impedance: 50 ~lhrns rmminal. Maximum Input Power: +zO dtlm (100 mW), 10 VLIC. Test Port Connector: Type-N Malt (Optium 001: APC-7)
Dimwsions: Cablc length is 1 22 m (48 in.). Weight: Net 0.24 kg (0 5 lb). Shipping 1.0 kg (X.2 tb). Ordering Information:
HP85025A detector Option 001: AK-7 test port connector
HP 850256 Detector
Note: The specifications fnr 850258 exccptils noted below, Frequrrncy Range: IO MI 1% to lb.5 GHz. Return Loss (25 +5”C):
18 Ctilz to 26.5 CHz: 12 dB.
Frequency Rsrpansc (-IO dBm, 29 ‘5=C):
18 GHz to 26.5 CHz: r1.0 dB typical.
Test Port Connccfor: APC-3.5 Male
the
HP 85025A apply lor the HP
IO MHz to 40 MI Ir: 210 dB. 4OMllzto4CHz: >ZOdfi.
4 CHz t0 12 CHz:
12 CHz to 18 CHz: 216 dB. Impedance: 50 ohms nominal. Maximum Input POWBI: + 20 dBm (100 mW).
Test Port Connector: Type N-Male.
Option 001: APC-7, Dimensions: Cable length i~1.22 m (48 in).
Weight: Net O-t? kg (0.5 lb). Shipping0.0 kg (2 lb?).
Ordering Information:
t IP11664A
Option 001: APC-7 test port cotmcctor
HP 11664E (NOW: I‘he spccific:ations fur th@ HP 11664A apply Ior the HP
11664E ~~~f?pt a5 not& below.) Frequency RanR.x 10 MI lz tcr 26.5 CHr. Frequency Re$pwx (-10 dRm, 25 *sac):
IO MHz to 18 GHz: to.5 dB.
‘IOMHz 1026.5 GHz: *‘l.Odtl.
detector
Detector
Frequency @HZ)
218 df3.
COPYRIGHT AND DISCLAIMER NOTICE
Copyright - Agilent Technologies, Inc. Reproduced with the permission of Agilent
Technologies Inc. Agilent Technologies, Inc. makes no warranty of any kind with regard
to this material including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Agilent Technologies, Inc. is not liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material or data.
4iIMII~tobCH~:~~OdO. 6C~i~t~,20CI~i~:~lbdU. 2OCHzto26.5GHz:~l2dB(-bOto -1OdRm).
l&l Port Cunnwlor: APC-3.5 t”hk!.
HP 116644D Waveguide Detector
Function: The HP 116640 detects AC modulated si+r in the fre
qu#?nt:y range of 26.5 to 40 CHr. h?q”.?ncy Range: 26.5 to 40 CHZ. Frequency Response (0 dtlm, 25 *5OC):
~ +2
zx +, i.5 0
z
“2 -1
-2
Rclurn Low 212 d!3 (-50 to 4,lOdBm, 25 +5X) Maximum Input Power: +I6 dHm (40 mW). TuSt Pnrt Connector: El.4 six WR-28
(mates with UC-599/L cover flange). Dimensions: Cable length is 1.22 m (48 in).
Weight: Net 0.24 kg (0.5 Ii,). Shipping 1.0 kg (2.2 Ihs).
I I 1 , t I , I I I I 1
Typical
­,
265
1 I I I 1 “I I
1 I I
II
-l--l Specifi&on--
rectaneular
I
Wavegyide
I
Froquencq (GHZ, 40
R/Q/V 8SOZ6A Waveguide Detectors*
Function: Thr R/Q/U tj502bA wavexoide dctwtors am designed
specifically for USC’ with the HP 8757A for modulated (AC) or ur~morhrlated ([IX) detection at millimrtl:r-wave frcuwncies. In
AC mode, the HP tl5026 dptcctors detect the envelope of the
27.8 kHz modulated signal. In DC mode, the detectors meawrc power dirrctly.
Frequency rang.2
HP Rf1502r,n, 2b.5 to I” CM HPQ8502bA. 33 toS0CHr. I,IP UU5U2bA. 40tobOCHz.
Frcqufncy Ftcsponsc (0 dh, 2SZ5~CJ.
HI’R8052bA. *I.5 dR
HI’ Q,UR5”2bA. k2.0 dB
ktum Lnss(+l”to -5OdRm. 25 +Y’C):
HP R8502bA, 212 dB HP Q/U8502bA. 210 dB
Maximum Input Power: fib dRm (40 mW).
Test Port conn.?ctor:
HP R~so~~A, E!A size wR-28 wavcguide (mates with U&599/U
COVCl flange).
HP Q8502bA, EIA size WR.22 waveguide (rwtes with UC-383
snverflangc).
HP U8502bA, E,A size WR-I9 waveguide (mates with UC’.383
cover flange).
Dimcnsinns: Cable length is ‘I.22 m (48 in.)
Wuitthl: Net0.24 kg (0.5 lb.). Shippinc1.0 kg(2.2 Ibs.).
HP 850256 Detector Adapter”
.ee
scqucr~cecirlihmtestheHP8757Atoy~~urdetcctorfora,~ar:curatc display uf power level. The HP 85025C can bc used it) r!ithcr AC
or DC detection modes.
Frequency Range: Der~unds r,>n the external detcctur wed.
Calibration Procedure: The dctcctor curve fitting calibration rou,
tine allows you to account for the voltagc YRTS~S input powr:r characteristics of your detector. This calibration wquires ~WI)
known calibration inputs. one at a high level (lincar operating region. above 0 d&n). and one at a low hwl (square l+v
operating region, l~:low -20 dam).
DC dctcctor zeroing: In DC detection mode, the HP 11757A
AUTOZERO function compcnsatcs fur offset detector. A screwdriver adjustment xcow~ts for the initial
voltage offset when the dctcctw is first conncctcd. Maximum Measurable Input: *3 V peak. Maximum Allowable Input (typical): *lO V peak.
Connector: SMAmale.
Dimensions: Clble length is 1.22 m (4B in).
Weight: NetO.24 kg (0.5 lb). Shippingl.0 kg (2.2 lb).
voltage
drift in tht!
Waveguide Accessories
The HP Coaxial & Waveguide Measurement Acccssrrrirs Catalog
(HP lit. 114952~It2621 describes the assortment of HP wavcguidl-!
accessories that can bc used with the HP 8757h np to GO’CHz.
Reflection and transmission meawrements in waveguide wn
be easily madr bv using an HP 752 series directional coupler
and HP 116640 or 85026 wwnguide detectors.
DIRECTIONAL B
HP 85027AlBlC
Function: The HP 05027A/tMC bridges each meawre the return
loz.~ of the test device with an internal Schottky diedo dctectnr.
AC or DC detection mode.
Frequency Range:
HP85027A. 10MHr to18CHz.
HP 850278,lO MHz to 26.5 C,Hz
Hf85027C. 10MHr tu, 1BCHz.
Nominal Impedance: 50 otms.
Input Co”“.xtor:
HP85027A, Type-N Fcmalc.
HP 850278, APC-3.5 t%,~a,e.
HPM5027C. Type-N Fcmalc.
ou1put Co”“.xtor:
HP 85027A, APC-7
HP850278, APC-3.5 Female.
HP 85027C. Type-N Female.
Maximum Power to Input Port: 4-23 dBrn Directivity (25 *5T):
HP85027A,1OMHzto18CHr:40dn. HP850278, lOM,-12 W 20CHz: 40dB.
20 to 26.5 CHz: 3G dn.
HP85027C. IOMHz to 12.4 CHz: 3BdR.
12.4 to18CHz: 34 dB.
gg{
.04
hewenw (GHzI
Test Port Match:
HP85027A/C, 10MIl-r to8.4 C;Hz: 223 dR (~I.15 SWR).
8.4 t012.4 Cl II: >19dB (~1.25 SWK).
12.4 to 18 GHz: 215 dR (g4.3 SWR).
llP850278.lOMHzto8.4C,ti~: >ZidB (<I.‘,5 SWR).
8.4 to2OGHz: 215 dR (~1.43 SW,<). 20 to 26.5 Wz: 21, d” (~1.75 SWR).
Tvpical Input Port Match:
HP85027A,C. 10 MHz tu8.4 CHz: z2OdB (51.22 SWR).
8.4 to 1” Cl-k 217 dB (51.33 SWK).
HP RS0278.10 MHz to 8.4 GHr: 220 dB (S1.22 SWR).
8.4to20GHz!~~7dn (51.33 swnj. 20 to 26.5 GIN,: 1,” dU (~1.93 SWK),
onal BrkhJes
18 20
26.6
Loading...