Hewlett-Packard to Agilent Technologies Transition
This manual may contain references to HP or Hewlett-Packard. Please note that
Hewlett-Packard's former test and measurement, semiconductor products and chemical analysis
businesses are now part of Agilent Technologies. To reduce potential confusion, the only
change to product numbers and names has been in the company name prefix: where a product
number/name was HP XXXX the current name/number is now Agilent XXXX. For example,
model number HP 11857B is now model number Agilent 11857B.
Documentation Warranty
THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED "AS IS," AND IS
SUBJECT TO BEING CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FURTHER, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AGILENT
DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED WITH REGARD TO
THIS MANUAL AND ANY INFORMATION CONTAINED HEREIN, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. AGILENT SHALL NOT BE LIABLE FOR
ERRORS OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION
WITH THE FURNISHING, USE, OR PERFORMANCE OF THIS DOCUMENT OR ANY
INFORMATION CONTAINED HEREIN. SHOULD AGILENT AND THE USER HAVE A
SEPARATE WRITTEN AGREEMENT WITH WARRANTY TERMS COVERING THE
MATERIAL IN THIS DOCUMENT THAT CONFLICT WITH THESE TERMS, THE WARRANTY TERMS IN THE SEPARATE AGREEMENT WILL CONTROL.
DFARS/Restricted Rights Notice
If software is for use in the per formance of a U.S. Government prime contract or
subcontract, Software is delivered and licensed as “Commercial computer software” as
defined in DFAR 252.227-7014 (June 1995), or as a “commercial item” as defined in FAR
2.101(a) or as “Restricted computer sof tware” as defined in FAR 52.227-19 (June 1987) or
any equivalent agency regulation or contract clause. Use, duplication or disclosure of
Software is subject to Agilent Technologies’ standard commercial l icense terms, and
non-DOD Departments and Agencies of the U.S. Government will receive no greater than
Restricted Rights as defined in FAR 52.227-19(c)(1-2) (June 1987) . U.S. Government users
will receive no greater than Limited Rights as defined in FAR 52.227-14 (June 1987) or
DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any technical data.
Printing Copies of Documentation from the Web
To print copies of documentation from the Web, download the PDF file from the Agilent
web site:
•Go to http://www.agilent.com.
• Enter the document’s pa rt number (located on the title page) in the Quick Search box.
• Click GO.
• Click on the hyperlink for the document.
• Click the printer icon located in the tool bar.
Contacting Agilent
This information supersedes all prior HP contact information.
HP Part Number 11857-90016 Supersedes: September 1988
Printed in USA September 1999
Notice.
The information contained in this document is subject to change without notice.
Hewlett-Packard makes no warranty of any kind with regard to this material, including but not limited to,
the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not
be liable for errors contained herein or for incidental or consequential damages in connection with the
furnishing, performance, or use of this material.
To obtain optimum performance from this cable set, observe these simple precautions:
• Flex and straighten the cables as little and seldom as possible.
• Make connections carefully to avoid misalignment and connector damage or inaccurate
measurements.
• Keep the connectors free of dirt and metallic particles.
• If you must clean the connectors, try clean compressed air first. Do not use abrasives. With
a plastic swab, apply only liquid Freon (trichlorotrifluoroethane) as a solvent.
• Type-N(f) center conductor protrusion: 0.207 inch maximum.
• Type-N(m) center conductor shoulder or dielectric recession: 0.208 inch minimum.
Description
The HP 11857B RF cable set consists of two type-N 75Ω cables, specified from 300 kHz to
2 GHz. This set provides shielded RF connections to extend the test ports of S-parameter test
sets such as the HP 85046B. The cables can be ordered as either phase-matched or
unmatched.
ModelDescriptionQtyHP Part Number
HP 11857B
Standard
HP 11857B
Option B24
Phase matched type-N 75Ω cables
male-male connectors
male-female connectors
Unmatched type-N 75Ω cables
male-male connectors
male-female connectors
1
1
1
1
8120-2408
8120-2409
8120-8898
8121-0002
User’s and Service Guide 11857-90016 3
Figure 1.Model HP 11857B Cables, Option B24
4User’sand Service Guide 11857-90016
Operating Characteristics
HP 11857B
Standard
Impedance75Ω (nominal)75Ω (nominal)
ConnectorsType-N, male-male
Type-N, male-female
Phase Match≤ 4°
(at 2 GHz)
Return Loss≥ 24 dB
(300 kHz to 2 GHz)
Type-N, male-male
Type-N, male-female
HP 11857B
Option B24
n/a
≥ 24 dB
(300 kHz to 2 GHz)
CAUTIONMating a 75Ω(f) connector with a 50Ω(m) connector will destroy the 75Ω(f)
connector.
Physical Characteristics
HP 11857B
Standard
Length61 cm
(24 inches)
Weight (both cables):
Net0.91 kg (2 lbs)0.91 kg (2 lbs)
Shipping1.36 kg (2 lbs)1.36 kg (2 lbs)
HP 11857B
Option B24
61 cm
(24 inches)
User’s and Service Guide 11857-90016 5
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.