AGF Manufacturing 7000, 7200 User Manual

A

B

C

Model 7000

Model 7200

Model 7000
Model 7200

Pr e s s u r e re l i e f Va l V e s

For Fire Sprinkler Systems

½" ¾"

The AGF Manufacturing Inc. Models 7000 and 7200 are UL Listed/FM
Approved pressure relief valves designed specifically for fire sprinkler
systems. Both models relieve excess system pressure caused by surges
or temperature changes. The Models 7000 and 7200 comply with the re­quirements of NFPA-13 that stipulate a pressure relief valve be installed on
all gridded systems and downstream of all pressure reducing valves. The

Model 7000 has a ½" MIPT inlet and FIPT outlet and is included with our
Models 1011A, 1011T, 2511A, and 2511T TesTa n Drain® valves, Mod­els 3011A and 3011ASG in s P e c T o r ’sTesT® valves, and 1¼" – 6" Model
8011 ri s e r PacK

and is included with our 1" Model 8011 re s i D e n T i a l ri s e r PacK®.

Features include:

• UL Listed and FM Approved.

• Bronze body with stainless steel spring.

• Integral ushing handle to remove debris causing leaks through valve

seat and disc.

• Factory rated at 175 PSI.*

• 165 PSI, 185 PSI, 195 PSI, 205 PSI, 225 PSI, and 250 PSI ratings are
also available for the Model 7000.*

* Note: It is important to note that the pressure rating of the relief valve indicates an operating

range of pressure for both opening and closing of the valve. Standard relief valves are
required to OPEN in a range of pressure between 90% and 105% of their rating. The valves
are required to CLOSE at a pressure above 80% of that rating.

The relief valve should be installed where it is easily accessible for maintenance. Care should
be taken that the relief valve CANNOT be isolated from the system when the system is op­erational. A relief valve should NEVER have a shutoff valve or a plug downstream of its outlet.

®

s. The Model 7200 has a ¾" MIPT inlet and FIPT outlet

Di m e n s i o n s

Model SIZE A B C

7000 ½"

7200 ¾"

USA Patent and Other Patents Pending

AGF Manufacturing Inc.

100 Quaker Lane, Malvern, PA 19355

Phone: [phone]
Fax: [phone]

www.testandrain.com

Reliability, Versatility, Code Compatibility

13⁄4"

(44 mm)1"(25 mm)

13⁄4"

(44 mm)1"(25 mm)

35⁄16"

(83 mm)

35⁄16"

(83 mm)

Job Name:__________________________________

Architect: ___________________________________

Engineer: ___________________________________

Contractor: _________________________________

CS7000 3/08TESTANDRAIN, INSPECTORSTEST, and RISERPACK are registered trademarks of AGF Manufacturing Inc.

h e mo D e l 7000 Pr e s s u r e re l i e f Va l V e i s a V a i l a b l e w i T h T h e f o l l o w i n g r a T i n g s :

T

165 PSI 185 PSI175 PSI 195 PSI 205 PSI 225 PSI 250 PSI

Th e mo D e l 7000 Pr e s s u r e re l i e f Va l V e i s a l s o u s e D o n T h e f o l l o w i n g agf P r o D u c T s :

M3011A in s P e c T o r ’sTesT

M3011ASG in s P e c T o r ’sTesT

M1011A TesTa n Drain

®

®

1¼" – 6" M8011 co m m e r c i a l & re s i D e n T i a l ri s e r PacK

®

M1011T TesTa n Drain

®

TesTa n Drain

M2511T

TesT

®

®

M2511A

a n Drain

®

h e mo D e l 7200 Pr e s s u r e re l i e f Va l V e i s a l s o u s e D o n T h e f o l l o w i n g agf P r o D u c T :

T

1" M8011 re s i D e n T i a l ri s e r PacK

®