AGF Manufacturing 1000 User Manual
Model 1000
TO DRAIN
TO DRAIN
TO DRAIN
STREET EL
OR PIPE
STREET EL
FROM BRANCH
SYSTEM ACCESS PORT
A
H
F
G
E
1/2” NPT SYSTEM
ACCESS PORT
TESTa n DRaIn®
Sectional Floor Control Test and Drain Valve
¾" 1" 1¼" 1½" 2"
• The AGF Manufacturing Inc. Model 1000 TESTa n DRaIn®
provides both the test function and the express drain
function for a wet re sprinkler system.
• The Model 1000 complies with the requirements of
NFPA-13, NFPA-13R, and NFPA-13D.
• The Model 1000 TESTa n DRaIn® is a compact single
handle ball valve which includes a tamper resistant test
orice and integral tamper resistant sight glasses, and is
300 PSI rated.
• Available in a full range of sizes from ¾" to 2" NPT and
BSPT, with all speciable orice sizes ³⁄8" (2.8K), 7⁄16" (4.2K),
½" (5.6K), 17⁄32" (8.0K), 5⁄8" (11.2K, ELO), ¾" (14.0K, ESFR),
and K25 as required by NFPA 13, 2007 Edition (see reverse).
• The orice size is noted on the indicator plate and the valve
features a tapped and plugged port for system access.
• A locking kit is available and can be ordered with the valve
to provide vandal resistance or prevent unintentional alarm
activation.
• Repair kits including (1) adapter gasket, (1) ball, (2) valve
seats, (1) stem packing, and (1) stem washer are available
for all TESTa n DRaIn® valves. Valve and orice size must
be specied when ordering.
Mo d e l 1000 - Fr o n t Vi e w , Ve r t i c a l in s t a l l a t i o n
RIGHT HAND/STRAIGHT INSTALLATION
Reliability, Versatility, Code Compatibility
CS1000 10/09TESTANDRAIN is a registered trademark of AGF Manufacturing Inc.
Model 1000
TO DRAIN
TO DRAIN
D
B
C
A
H
F
G
E
1/2” NPT SYSTEM
ACCESS PORT
TESTa n DRaIn®
300 PSI Bronze Ball Valve
Mo d e l 1000 - pl a n Vi e w Fr o n t Vi e w - ho r i z o n t a l in s t a l l
di M e n s i o n s
Orice Size Available: 3⁄8", 7⁄16", 1⁄2", 17⁄32", ELO (5⁄8")*, ESFR (3⁄4")*, & K25**
SIZE A B C D E F G H
¾"
1"
11⁄4"
1½"
2"
* Available on 11⁄4" to 2" size units only
** Available on 11⁄2" and 2" size units only
51⁄16"
(128 mm)
51⁄16"
(128 mm)
57⁄16"
(163 mm)
67⁄16"
(163 mm)
67⁄16"
(163 mm)
11⁄2"
(37.5 mm)
11⁄2"
(37.5 mm)
111⁄16"
(43 mm)
113⁄16"
(45 mm)
113⁄16"
(45 mm)
23⁄16"
(57 mm)
23⁄16"
(57 mm)
29⁄16"
(65 mm)
31⁄4"
(81.5 mm)
31⁄4"
(81.5 mm)
35⁄8"
(93 mm)
35⁄8"
(93 mm)
41⁄4"
(108 mm)
51⁄16"
(127 mm)
51⁄16"
(127 mm)
33⁄8"
(86 mm)
33⁄8"
(86 mm)
35⁄16"
(83 mm)
37⁄8"
(99 mm)
37⁄8"
(99 mm)
113⁄16"
(46 mm)
113⁄16"
(46 mm)
115⁄16"
(51 mm)
25⁄8"
(67 mm)
25⁄8"
(67 mm)
49⁄16"
(117 mm)
49⁄16"
(117 mm)
59⁄16"
(141 mm)
81⁄4"
(207 mm)
81⁄4"
(207 mm)
63⁄8"
(162.5 mm)
63⁄8"
(162.5 mm)
51⁄2"
(192 mm)
107⁄8"
(274 mm)
107⁄8"
(274 mm)
Ma t e r i a l s
Handle: Steel
Stem: Rod Brass
Ball: C.P. Brass
Body: Bronze
Valve Seat: Impregnated Teon
Indicator Plate: Steel
Handle Stop: Steel
ap p r o V a l s
UL and ULC Listed (EX4019)
FM Approved
NYC-BSA No. 720-87-SM
th e Mo d e l 1000 p r o V i d e s a l l o F t h e F o l l o w i n g …
From the 2007 Edition of NFPA 13
Chapter 8.16.2.4.1* Provisions shall be made to properly drain all parts of the system.
Chapter 8.16.2.4.2 Drain connections, interior sectional or oor control valve(s) – shall be provided with a drain
& 8.16.2.4.3
Chapter 8.16.2.4.4 Drains shall discharge outside or to a drain capable of handling the ow of the drain.
Chapter A.8.17.4.2 (Wet Pipe System) test connection is permitted to terminate into a drain capable of accepting full
Chapter 8.17.4.2.2 The test connection valve shall be readily accessible.
Chapter 8.17.4.2.4 shall be permitted to be installed in any location… downstream of the waterow alarm.
Chapter 8.17.4.3.1 (Dry Pipe System) a trip test connection not less than 1" in diameter, terminating in a smooth bore
Chapter 8.17.4.3.2 The trip test connection… with a shutoff valve and plug not less than 1", at least one of which shall
connection having a minimum size as shown in Table 8.16.2.4.2.
ow… using an approved sight test connection containing a smooth bore corrosion-resistant orice
giving a ow equivalent to one sprinkler…
corrosion-resistant orice, to provide a ow equivalent to one sprinkler…
be brass.
®
USA Patent # 4741361 and Other Patents Pending
Job Name:__________________________________
Architect: ___________________________________
Engineer: ___________________________________
AGF Manufacturing Inc.
100 Quaker Lane, Malvern, PA 19355
Phone: 610-240-4900
Fax: 610-240-4906
www.testandrain.com
Contractor: _________________________________
Loading...