AGERE R2860E023, R2860E040 Datasheet

R2860E Digital Receiver OC-192/STM-64

Description

The R2860E receiver module incorporates a high­speed planar PIN diode and a GaAs PHEMT pream­plifier to provide exceptionally high performance. The
unit provides high bandwidth and sensitivity to oper­ate with long, dispersive fibers, plus wide dynamic
range for operation over a variety of loss budgets.
High transimpedance coupled with a nonquantizing
limiting buffer output provides high gain while limiting
the maximum output signal swing, thereby simplifying
the interface to subsequent stages.

Data Sheet, Rev. 2

September 2001

Features

■

High sensitivity, –20 dBm typical

■

Wide dynamic range, 2 dBm overload typical

■

High transimpedance, 1200 Ω typical

■

Hermetically sealed

■

Optimized for multiple supply voltages, including
±5 V dual supplies, 8 V only, or –8 V only

■

ac-coupled output

Applications

■

10 Gbits/s short, intermediate, and long-haul sys­tems

■

SONET/SDH equipment

■

Datacom equipment

Agere Systems Inc. offers several 1R and 2R high­speed receiver components for 10 Gbits/s and

12.5 Gbits/s applications. APD and PIN versions are
available in a 6-pin hermetic package with coaxial
output. In addition, Agere Systems also offers a PIN
receiver with coplanar waveguide in a multisource
agreement form-factor or a smaller, space sensitive
package. For more information about the complete
line of high-speed receiver products, please visit the
Agere Systems' website at www.agere.com/opto.

Data Sheet, Rev. 2

R2860E Digital Receiver OC-192/STM-64 September 2001

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso­lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.

Parameter Symbol Min Max Unit

Operating Temperature Range T

OP

–5 70 °C
Storage Case Temperature Range Tstg –40 85 °C
Preamp Supply Voltage V
Photodiode Bias Voltage V

CC-VEE
PD-VEE

Optical Input Power P

IN

—12V

—20V

—4dBm

Electrical/Optical Characteristics

Table 1. Electrical and Optical Characteristics

(25 °C Case Temperature)

Parameter Symbol Min Typ Max Unit

Optical Wavelength Range λ 1280 — 1580 nm
Sensitivity (10

Overload (10

-10

BER, PRBS 2

-13

BER, PRBS 2

23

– 1) — — –20 –18 dBm

23

– 1) — 0 2 — dBm
Responsivity R 0.7 0.8 — A/W
Dark Current I

D

——1.0nA
High-Frequency Cutoff — 8.0 9.0 — GHz
Low-Frequency Cutoff — — — 30 kHz
Transimpedance Z 800 1200 — Ω
Maximum ac Output Voltage Swing — — 450 — mV p-p
RF Output Return Loss

RL

RF

— — 10 dB

(0.1 GHz—10 GHz)
Optical Return Loss RL 27 — — dB
Logic Sense — — Noninverting — —
Photodiode Supply Voltage* V
Positive Supply Voltage* V
Negative Supply Voltage* V
Supply Current I

* Floating supply capability allows alternate powering configurations such as VPD = 8 V, VCC = 8 V, and VEE = GND, or V

EE

and V

= –8 V.

CC

PD
CC
EE

, –I

EE

357V

455.5V

–5.5 –5 –4 V

—80120mA

PD

= GND, V

CC

= GND,

2

Agere Systems I nc.