AGERE R2860D023, R2860D040 Datasheet

R2860D Digital Receiver OC-192/STM-64

Description

The R2860D receiver module incorporates a high­speed planar PIN diode and an HBT preamplifier to
provide exceptionally high linearity. The receiver is
designed to provide very clean pulse response at
10 Gbits/s that results in high-quality eye patterns
(see Figure 1).

Agere Systems Inc. offers several 1R and 2R high­speed receiver components for 10 Gbits/s and

12.5 Gbits/s applications. APD and PIN versions are
available in a 6-pin hermetic package with coaxial
output. In addition, Agere Systems also offers a PIN
receiver with coplanar waveguide in a multisource
agreement form-factor or a smaller, space sensitive

Features

■

Linear output up to 0 dBm optical input power

package. For more information about the complete
line of high-speed receiver products, please visit the
Agere Systems' website at www.agere.com/opto.

Data Sheet, Rev. 2

September 2001

■

High sensitivity, < –18 dBm typical

■

High overload, >2 dBm typical

■

Transimpedance, 500 Ω typical

■

dc-coupled output

■

Hermetically sealed

Applications

■

10 Gbits/s short, intermediate, and long-haul sys­tems

■

DWDM equipment

■

SONET/SDH equipment

■

Datacom equipment

Data Sheet, Rev. 2

R2860D Digital Receiver OC-192/STM-64 September 2001

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso­lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.

Parameter Symbol Min Max Unit

Operating Temperature Range T

OP

–5 70 °C
Storage Case Temperature Range Tstg –40 85 °C
Preamp Supply Voltage V
Photodiode Bias Voltage V
Optical Input Power P

CC

PD

IN

—8.5V

—20V

—4dBm

Electrical/Optical Characteristics

Table 1. Electrical and Optical Characteristics

(25 °C Case Temperature. Test Conditions: 10 Gbits/s, NRZ,

T

= 25 °C)

A

Parameter Symbol Min Typ Max Unit

Optical Wavelength Range λ 1280 — 1580 nm
Sensitivity (10

Overload (10

-10

BER, PRBS 223 – 1) — — –18 –15 dBm

-13

BER, PRBS 2

23

– 1) — 0 2 — dBm
Responsivity R 0.7 0.8 — A/W
Dark Current I

D

——1.0nA
High-Frequency Cutoff — 8.5 10.0 — GHz
Low-Frequency Cutoff — — — 30 kHz
Group Delay (0.5 GHz—10 GHz) — — ±20 — ps
Transimpedance Z 400 500 600 Ω
Av erage Equivalent Input Noise

— — 13 15 pA/rt Hz

(30 KHz—8 GHz)

RF Output Return Loss*

RL

RF

—— 9dB

(0.1 GHz—8 GHz)
Optical Return Loss RL 27 — — dB
Logic Sense — — Noninverting — —
Preamp Supply Voltage V
Photodiode Supply Voltage V
Supply Current I

* External dc block required on RF output.

CC

PD

CC

7.6 8.0 8.4 V
7812V

— 110 130 mA

2

Agere System s Inc.