![](/html/8c/8c3a/8c3a3632331f0ff03101f446f197791ddda6315c5d97b388ecb0f0fc55886158/bg1.png)
5833P Diplexer, Full-Duplex,
Bidirectional, Single-Fiber, Data and Voice Transceivers
Description
The 5833P diplexer is a single-fiber transceiver that
enables simultaneous bidirectional, voice and data
transport over a single optical fiber in FTTx (access)
networks.
The diplexer consists of a Fabry-Perot laser and a
PIN photodiode coupled to a PECL interface for easy
installation.
These low-cost devices can be used in a variety of
locations in the network where single-fiber telemetry
is required. The laser emits at 1310 nm and the
photodetector receives another 1310 nm signal.
Data Sheet
May 2001
Features
■
Single-fiber connection
■
Low cost
■
3.3 V PECL interface
■
SFF footprint (2 x 5 pinout)
Applications
■
Single-fiber data and voice transport
■
FTTx architectu res
■
Site-to-site optical telemetry
■
Customer premise gateways
The 5833P diplexer is currently available at OC-3
(155 Mbit/s) and OC-12 (622 Mbits/s) data rates and
with several optical connector options.
![](/html/8c/8c3a/8c3a3632331f0ff03101f446f197791ddda6315c5d97b388ecb0f0fc55886158/bg2.png)
5833P Diplexer, Full-Duplex, Data Sheet
Bidirectional, Single-Fiber, Data and Voice Transceivers May 2001
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.
Parameter Symbol Min Typ Max Unit
Operating Temperature Range T
Storage Temperature Range Tstg –40 25 85 °C
Supply Voltage:
V
(Tx/Rx)
CC
Optical Return Loss (APC Pigtail
Connector)
OP
V
CC
RL — — –45 dB
–40 25 85 °C
—3.33.6V
Characteristics
Table 1. Transmitter Specifications
Parameter Condition Min Typ Max Units
Wavelength CW 1260 1310 1360 nm
Dynamic Extinction Ratio — 8.2 — — dB
Output Power — –15 –12.5 –10 dBm
Input Data Voltage:
Low
High
Transmit Disable TTL Low — — 0.8 V
Enable Delay Time Open Loop — 250 — ns
Bit Rate:
5833P-0155
5833P-0622
Supply Current:
–40 °C
25 °C
85 °C
—
Vcc – 2.1
Vcc – 1.2
—
—
—
Exclude Input
Bias Network —
—
—
—
—
155
622
100
105
130
Vcc – 1.4
Vcc – 0.5
—
—
—
—
—
V
V
Mbits/s
Mbits/s
mA
mA
mA
2
Agere System s Inc.