AGERE 5200-Series Datasheet
5200-Series 64 x 64 MEMS
Optical Switch Module
Preliminary Data Sheet, Rev. 2
July 2001
Representing next-generation passive technology, the
5200-Series 64 x 64 microlectromechanical systems (MEMS)
optical switch is compact, economical, and can be easily
incorporated into a system.
Features
■
MEMS 3D architecture
■
Small form factor
■
Low loss
■
Low power dissipation
■
Nonblocking
■
Scalable
■
Protocol and bandwidth independent
■
Data rate transparency
■
Integrated control electronics
Applications
■
Optical cross connects
■
Optical add/drop multiplexer
■
Dynamic capacity provisioning
■
Test equipment
Description
The fully-integrated 5200-Series 64 x 64 MEMSbased optical switch component for optical networking systems features scalable, 3D MEMS architecture. It offers 64 input and 64 output ports in a small
form factor, and contains the control and feedback
electronics needed to be easily incorporated into a
system.
The 64 x 64 MEMS optical switch module utilizes
moving micromirrors capable of manipulating light,
eliminating the need for OEO conversions, and
resulting in bit-rate and protocol independence.
2
Agere Systems Inc.
5200-Series 64 x 64 MEMS Preliminary Data Sheet, Rev. 2
Optical Switch Module July 2001
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.
Electrical/Optical Characteristics
Parameter Symbol Min Max Unit
Operating Temperature Range T
C
–5 70 °C
dc Power Supplies — — 5, ±15 V
Input Power P
IN
—15dBm
Table 1. Electrical/Optical Characteristics
Parameter Symbol Min Typ Max Unit
Inser ti on Loss L
INS
—— 6dB
Wavelength Range:
C-Band
L-Band
1.3 µm
λ
1528
1565
1280
—
—
—
1562
1607
1320
nm
nm
nm
Polarization-dependent Loss PDL — — 0.2 dB
Optical Return Loss ORL 30 — — dB
Isolation ISO 50 — — dB
Polarization-mode Dispersion PMD — — 0.1 ps
Mirror Switching Time I
TH
—20—ms
Power Dissipation P
DISS
—15 —W
Optical Connectors — MTP —
Electrical Connector — 68-Pin SCSI-Type —
Loading...