Agema AG7448 User Manual
Agema ToR Switch
AG-7448PL Series
Installation Guide
www.agemasystems.com
Copyright
All specications and gures are subject to change without prior notice. Actual products may look
different from the photos.
All trademarks and logos mentioned in this guide are the properties of their respective holders.
Copyright © 2014 Agema Systems Inc. All rights reserved.
Regulatory and Safety Information
This product has been tested in accordance to, and complies with the following safety standards and
electromagnetic compatibility (EMC) inspection standards.
Emissions
• AS/NZS CISPR 22: Class A
• ICES-003, Issue Class A
Applicable standard
Safety
Applicable standard
Immunity
Applicable standard
RoHS
Applicable standard All AG-Series components are EU RoHS compliant
• EN 55022: Class A
• VCCI Class A
• CCC
• FCC CFR 47 Part 15, Subpart B Class A
• EN 60950-1, Second Edition
• UL/CSA 60950-1, Second Edition
• IEC 60950-1, Second Edition Including All National
• CCC
• EN 300 386, EMC for Network Equipment
• EN 55024:
• EN 61000-3-2: Harmonic Current Emissions
• EN 61000-3-3: Voltage Fluctuations and Flicker
• EN 61000-4-2: ESD
• EN 61000-4-3: Radiated Immunity
• EN 61000-4-4: EFT
• EN 61000-4-5: Surge
• EN 61000-4-6: Low Frequency Conducted Immunity
• EN61000-4-8: Power Frequency magnetic eld
• EN61000-4-11: Voltage dips and interruptions
Warning: Fiber Optic Port Safety
When using a ber optic port, never look at the transmit laser while it is powered
on. Also, never look directly at the ber TX port and ber cable ends when they are
powered on.
AG-7448PL Series ToR Switch
ii
Table of Contents
Table of Contents
Chapter 1: Introduction -------------------------------------------------------------------1
1.1 Overview ----------------------------------------------------------------------------------- 1
1.2 Package Content ------------------------------------------------------------------------- 1
1.3 Features ------------------------------------------------------------------------------------ 2
Chapter 2: Appearance and Mechanism --------------------------------------------3
2.1 Product Overview ------------------------------------------------------------------------ 3
2.2 LED Indentication ----------------------------------------------------------------------- 4
2.3 System Requirements ------------------------------------------------------------------ 6
2.4 Data Center Deployment --------------------------------------------------------------- 6
2.5 Power Supply Modules ----------------------------------------------------------------- 7
2.6 Fan Tray Module ------------------------------------------------------------------------- 7
Chapter 3: Installation ---------------------------------------------------------------------8
3.1 Mounting ----------------------------------------------------------------------------------- 8
3.2 Installing an Optional SFP+/QSFP Transceiver ---------------------------------10
3.3 Connecting to the Console Port ----------------------------------------------------- 11
3.4 Connecting to a Power Source ------------------------------------------------------ 11
Chapter 4: Making the Network Connections ----------------------------------- 12
4.1 Twisted-pair Connections -------------------------------------------------------------12
4.2 Fiber Optic Connections ---------------------------------------------------------------13
4.2 Ethernet Cabling ------------------------------------------------------------------------13
Appendix 1 : Technical Specifications --------------------------------------------- 14
Appendix 2 : Warranty ------------------------------------------------------------------- 15
Limited and Support Warranty -------------------------------------------------------------15
Technical Support -----------------------------------------------------------------------------15
iii
Chapter 1: Introduction
1.1 Overview
The AG-7448PL Series is a high performance performance ToR (Top of Rack) bare metal
switch design for today data centers. The device has forty-eight 10GbE SFP+ ports and four
40GbE QSFP slots, redundant, hot-swappable, load-sharing AC or 48VDC PSU, fan tray
with n+1 redundant fans. In addition to the rich bandwidth, the AG-7448PL Series provides
comprehensive switch hardware capability to support layer 2 and layer 3 software features
and this switch also meets customers’ needs for both capex and opex saving with their own
choice of preferred network operation system (NOS).
1.2 Package Content
After unpacking this switch, check the contents to be sure you have received all the
components. Then, before beginning the installation, be sure you have all other necessary
installation equipment.
• AG-7448PL Series switch
• 2 x power supply modules
• Rack-mounting kits
• Four adhesive foot pads for horizontal surface mounting
• 2 x Velcro strips
• Installation guide
If any item is missing or damaged, contact the vendor immediately, see Contact and Return
Information.
AG-7448PL Series ToR Switch
1
1.3 Features
The following lists the key main features of the AG-7448PL Series switch:
• 48 x 10GbE SFP+ ports
• 4 x 40GbE QSFP ports
• 1 x OOB Management
• 1 x Console port (RJ-45 type)
• 2 Hot plugging redundant power supplies
• 2 Fan tray slots (1+1 redundant)
• Power supply LED / Stack ID / FAN status LED indication
• Extensive system LED and per port LEDs
• Internal power supply; Max output 460w
• Standard 1U chassis high
• Alternate Store-Forward (ASF) mode - Cut-through is available to minimize the latency
• 640Gbps switching bandwidth (1280Gbps duplex)
• IntroductionChapter 1
• Automatic address learning function to build the packet-forwarding information table. The
table contains up to 128K MAC addresses
• 9 MB of packet buffer memory
• Support Jumbo Frame up to 12Kbyte
2
Chapter 2: Appearance and Mechanism
2.1 Product Overview
2.1.1 Front View
1357 911
246810 12
13 15 17 19 21 23
14 16 18 20 22 24
25 27 29 31 33 35
26 28 30 32 34 36
Management port x 1
QSFP port x 4
37 39 41 43 45 47
38 40 42 44 46 48 49 50
PWR1 PWR2 SYSTEM FAN
51 52
AG-7448PL
MGMT
CONSOLE
2.1.2 Rear View
< PWR2
FAN2 >
SFP+ port x 48
(Figure 2-1: Front View)
2 Fan tray slots; 4 (3+1) fans
Redundant PSU x 2
(Figure 2-2: Rear View)
< FAN1
Ethernet port x 1
PWR1 >
AG-7448PL Series ToR Switch
3
Loading...