Aga Ranges EC LM-2, EE LM-4 User Manual

12/06 EINS 513307

Remember, when replacing a part on this appliance, use only spare parts that you can be assured

conform to the safety and performance specification that we require. Do not use reconditioned or copy

parts that have not been clearly authorised by AGA-RANGES.

PLEASE READ THESE INSTRUCTIONS BEFORE USING THIS APPLIANCE

IMPORTANT : SAVE OWNERS MANUAL FOR THE LOCAL INSPECTORS USE

CUSTOMER: KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

Comprising

Installation & Users

Instructions

AGA ELECTRIC RANGE (EC LM - 2

OVEN & EE LM - 4 OVEN) - OWNERS

MANUAL

FOR USE IN USA/CANADA

2

CONTENTS

SECTION PAGE

INSTALLATION 3

GENERAL NOTES 4
INSTALLATION 4
APPLIANCE DIMENSIONS 5-6
ELECTRICAL 7
INSTRUCTIONS 7
ELECTRICAL TEST PROCEDURE 7
WIRING DIAGRAM 8

USERS GUIDE 9

SAFETY PRECAUTIONS 10-11
RANGE ACCESORIES 12
HEAT INDICATOR 12
THERMOSTAT CONTROL 12
SERVICING 13
OPERATING YOUR AGA 13
FITTING OF OVEN SHELVES 14
REMOVAL OF OVEN SHELVES 15
CLEANING & CARING FOR YOUR AGA 16
GUIDE TO AGACOOKING 16

Installation

Section

3

CAUTION:

THIS UNIT IS HEAVY, PROPER EQUIPMENT AND ADEQUATE

MANPOWER MUST BE USED IN MOVING THE RANGE TO

AVOID DAMAGE TO THE UNIT OR THE FLOOR

Remember, when replacing a part on this appliance, use only spare parts that you can be
assured conform to the safety and performance specification that we require. Do not use
reconditioned or copy parts that have not been clearly authorised by AGA-RANGES.

GENERAL NOTES

INSTALLATION

NOTE: THESE INSTALLATION INSTRUCTIONS SHOULD BE LEFT WITH THE APPLIANCE AND THE USER TO

RETAIN FOR FUTURE REFERENCE.
The Aga range is delivered unassembled. Before installation can be made, the site is inspected for suitability by an

authorised Aga distributor and corrected where necessary to conform with local inst allation codes or in the absence of local
codes with:

NA TIONAL ELECTRICAL CODES ANSI/NFPA70
Assembly is undertaken on site by the same Aga distributor to ensure correct performance and safety.

THE INSTALLATION OF THIS APPLIANCE MUST NOT BE LESS THAN 12mm FROM ANY SURFACE.

With specific exceptions, the installing of any type of Aga Range is subject to the respective directions cont ained in current
issue of the local Building Regulations. In addition, planning permission may need to be obtained, which should be applied
for separately.

The complete range is floor-mounted and the space in which the appliance is to be fitted must have the following minimum
dimensions:-

A minimum clearance of 60mm is required above the raised insulating cover handle.
Side clearance zero unless range is fitted against a wall, where 116mm is required at the right hand side for oven access.

In addition a minimum clearance of 1000mm must be available at the front of the cooker to enable the cooker to be
serviced.

To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the
surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood
that projects horizontally, a minimum of 5” beyond the bottom of the cabinets.

NOTE: AGA RANGES ARE DELIVERED EX-WORKS UNASSEMBLED. ASSEMBLY IS UNDERTAKEN BY THE
AUTHORISED AGA DISTRIBUTOR/SPECIALIST .

Range Base or Hearth

It is essential that the base or hearth on which the range stands should be level and be capable of supporting the total
weight of the range.

Model EC-LM - 406 Kg

EE-LM - 584 Kg

The top of the hearth must be of non-combustible material for a minimum thickness of 12mm.
The wall behind the range must be of non-combustible material for a minimum thickness of 25mm.

Tiling

When the range is to stand in a recess, or against a wall which is to be tiled, in no circumstances should the tiles overlap
the cooker top plate.

Installation Requirements

The installation of the range must be in accordance with the relevant requirements of the local wiring and building
regulations.
It should be in accordance also with any relevant requirements of the local authority.

In your own interest, and that of safety to comply with the law, all appliances should be installed by an authorised Aga
distributor, in accordance with the relevant regulations.

4

ABCDFGHKL

RST

116 55 114

mm

987 889 851 679

1330

756

1125 12

698

5

EC-LM MODEL

Fig. 1

Fig. 1B

EE-LM MODEL

ABCDFGHKL

RST

116 55 114

mm

1487

889 851 679

1330

756

1125 12

698

Fig. 1A

6