Aga Ranges 60RDA 115V User Manual
Aga 60RDA 115V
Installation
Operation &
Maintenance
Instructions
Welcome
All specifications and product design subject to change without notice.
Such revisions do not entitle the buyer to corresponding changes, improvements,
additions, replacements or compensation for previously purchased products.
2
Remove Packaging
Your refrigerator has been packed for shipment with all
parts that could be damaged by movement securely
fastened. Before using, be sure all packing materials and
tape have been removed.
Important
Keep your carton packaging until your refrigerator has
been thoroughly inspected and found to be in good
condition. If there is damage, the packaging will be needed
as proof of damage in transit.
Installation
Select Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Cabinet Clearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Grounding Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Features
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Gastronorm System . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Drawer Organizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Care and Cleaning of Your Unit
Care of Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Normal Responsibilities of Owner . . . . . . . . . . . . . . .6
Troubleshooting
Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Diagnostic LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Obtaining Service
Before Calling for Service . . . . . . . . . . . . . . . . . . . . . . . .8
How to Obtain Service . . . . . . . . . . . . . . . . . . . . . . . . . .8
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Installation
All specifications and product design subject to change without notice.
Such revisions do not entitle the buyer to corresponding changes, improvements,
additions, replacements or compensation for previously purchased products.
3
Select Location
The proper location will ensure peak performance of
your drawer refrigerator. Choose a location away from
heat and out of direct sunlight. Best performance will be
maintained when installed within the following
parameters:
Cabinet Clearance
Ventilation is required for the bottom front section of the
unit where the grille is located. Keep this area open and
clear of any obstructions. Adjacent cabinets and countertop
can be installed on top, back and sides of the unit as long as
grille and drawer access remain unobstructed. An opening
of 24" is required between cabinets with a depth of 24”.
Adjacent cabinets and countertop can be installed on top,
back and sides of the unit as long as the grille and drawer
access remain unobstructed. Ventilation is required for the
bottom front section of the unit where the grille is located.
Keep this area open and clear of any obstructions.
Make certain that the leveling legs supplied with the
drawer refrigerator are installed according to the
instructions. Leveling adjustments can be made by raising
or lowering the glides on the bottom of the unit.
DISCONNECT POWER SOURCE BEFORE ADJUSTING
LEVELING LEGS
Ideal Ambient Temperature Range*
built-in
freestanding
* Drawer Refrigerator will not perform correctly in ambient temperatures less than 55°F.
55-80°F
55-90°F
23.88
27.22
24.03
21.86
15.13
34
15.13
Important Safety Issue
A cabinet “anti-tip” device is mounted to the back of your
drawer refrigerator. If your installation is a built-in
undercounter application, you do not need to apply this
feature. If your installation is a free-standing application
with no counter top directly above the top of the drawer
refrigerator, you must apply this feature to prevent the unit
from tipping forward when the drawers are pulled out. The
“anti-tip”device is attached at the back of each cabinet.
Please see installation instructions supplied with the “antitip” device.
Electrical Connection
Use nominal 115 volt, 60 cycle AC only. DO NOT USE AN
EXTENSION CORD
Grounding Method
This product is factory equipped with a power supply cord
that has a three-pronged grounded plug. It must be
plugged into a mating grounding type receptacle in
accordance with the National Electrical Code and
applicable local codes and ordinances. If the circuit does
not have a grounding type receptacle, it is the
responsibility and obligation of the customer to exchange
the existing receptacle in accordance with the National
Electrical Code and applicable local codes and ordinances.
The third ground prong should not, under any
circumstances, be cut or removed. All U.L. listed
refrigerated products are equipped with this type of plug.
Installation
All specifications and product design subject to change without notice.
Such revisions do not entitle the buyer to corresponding changes, improvements,
additions, replacements or compensation for previously purchased products.
4
THIS UNIT SHOULD NOT, UNDER ANY
CIRCUMSTANCES, BE UNGROUNDED.
Loading...