Afcon 515 User Manual

P.O. Box 3365 South El Monte, CA 91733 626.444.0541 Fax [phone] www. Afcon.org

515

CPVC

DOUBLE OFFSET HANGER

1.00

SIZE-SYSTEM PIPE:
MATERIAL
FINISH

- Carbon Steel.

- Mil. Galvanized.

3/4" and 1"

LISTING/APPROVAL -

203 - EX 4231

PATENT - No. 6,702,236
FUNCTION
INSTALLATION

- Support/Restrain horizontal CPVC piping.

Per these instructions

­including NPFA 13, 13R, 13D and CPVC manufacturers instructions.
Install on horizontal or vertical mounting surface.

FASTENERS

WOOD #904

- UL Listed per NFPA 13.

: screw - no pre-drill.

3/4" and 1"

FEATURES

* Double 1 1/2" offset
* Center line matches #514.
*

3/4" and 1" pipe size have common center-line.

AFCON

* Offset edge eliminates abrasion.
* Required screw included - 3/8" hex head.

ORDERING

Specific products are exclusively designed to be compatible with other products including parts and fasteners, resulting in a listed sway brace, restrainer or hanger assembly.

Be advised DISCLAIMER NOT

not manufactured or sold by . shall be liable under any circumstances whatsoever for any direct or indirect, incidental or consequential damages of any kind, including but not
limited to loss of business or profit, when non- products have been, or are used.

AFCON

#904

- Part # and pipe size.

AFCON AFCON

the following warranty restriction will apply. - will warrant against the failure of its products when used in combination with other products, parts or systems

AFCON AFCON

AFCON

NOT

ONLY

AFCON

3/08

CAD

CAD