Afcon 511 User Manual
P.O. Box 3365 South El Monte, CA 91733 626.444.0541 Fax 626.444.3887 www. Afcon.org
511
SIDE MOUNT
CPVC - COPPER
HANGER
- 3/4" thru 2" pipe.
SIZE
MATERIAL
FINISH
LISTING/APPROVAL -
- Carbon Steel.
- Mil. Galvanized.
Side View - For
Drawings Below
203 - EX 4231, EX 2551
FUNCTION
INSTALLATION ,
- Hanger on CPVC and Copper pipe.
- Per NFPA 13, 13R 13D and CPVC
manufacturers instructions on top or bottom of beam.
Space by pipe type
SPECIAL NOTE: When installing on CPVC sprinkler system pipe:
Verify that all assembly components are cleaned of any surface oil.
FASTENERS
in :
in
FEATURES
* Offset edge eliminates abrasion.
- UL Listed per NFPA 13.
WOOD
3/4" - 2" screw - no pre-drill.
3/4" - 2"
STEEL
3/4" - 2" 1/4 or #14 Tek Screw.
3/4" - 2"
CPVC pipe Copper pipe - screw - no pre-drill.
-
min. 18 GA.
CPVC pipe Copper pipe - 1/4 or #14 Tek Screw.
#905
#905
”
”
Hanger - Wood Stud
Hanger - Metal Stud
* Retainer dimples secure hanger to pipe during installation.
* Required screw has 5/16" hex head - included.
ORDERING
Specific products are exclusively designed to be compatible with other products including parts and fasteners, resulting in a listed sway brace, restrainer or hanger assembly.
Be advised DISCLAIMER NOT
not manufactured or sold by . shall be liable under any circumstances whatsoever for any direct or indirect, incidental or consequential damages of any kind, including but not
limited to loss of business or profit, when non- products have been, or are used.
AFCON
#905
- Part # and pipe size.
AFCON AFCON
the following warranty restriction will apply. - will warrant against the failure of its products when used in combination with other products, parts or systems
AFCON AFCON
AFCON
NOT
ONLY
AFCON
1/08
CAD
Loading...