P.O. Box 3365 South El Monte, CA 91733 626.444.0541 Fax 626.444.3887 www. Afcon.org
510
CPVC - STEEL - COPPER
HANGER
SIZE
MATERIAL
FINISH
"
- 3/4 thru 3" pipe.
- Carbon Steel.
- Mil. Galvanized.
LISTING/APPROVAL -
203 - EX 4231, EX 2551
FUNCTION
To support horizontal piping - CPVC, Copper or Steel.
Hanger in listed mounting positions - Top, Bottom or Side.
Also, provides stability on vertical piping.
INSTALLATION
instructions
SPECIAL NOTE: When installing on CPVC sprinkler system pipe:
FASTENERS
on top, bottom or side of building element. Space by pipe type.
Verify that all assembly components are cleaned of any surface oil.
-
WOOD
in :
3/4" - 3" CPVC pipe 3/4" - 3" Copper pipe - screw -
3""
3/4" - " Steel pipe - 1/4 x11/2 lag screw - no pre-drill.
in
STEEL
3/4" - 3" CPVC pipe -
3 1/4" or #14 Tek Screw.
3/4" - " Copper pipe -
er NFPA 13, 13R, 13D and CPVC manufacturers
-P
UL Listed per NFPA 13
#905
screw - no pre-drill.
no pre-drill.
-
min. 18 GA.
#905
1/4" or #14 Tek Screw.
3/4" - 3" Steel pipe - 1/4" or #14 Tek Screw.
FEATURES
* Offset edge eliminates abrasion.
* Retainer dimples secure hanger to pipe during installation.
* Required screw has 5/16" hex head - included.
ORDERING
AFCON
#905
- Part # and pipe size.
Hanger
Stabilize - Only
*CAN ALSO BE USED TO REPLACE - #500 Pipe Strap
#520 Tin Strap
Specific products are exclusively designed to be compatible with other products including parts and fasteners, resulting in a listed sway brace, restrainer or hanger assembly.
AFCON AFCON
the following warranty restriction will apply. - will warrant against the failure of its products when used in combination with other products, parts or systems
Be advised DISCLAIMER NOT
not manufactured or sold by . shall be liable under any circumstances whatsoever for any direct or indirect, incidental or consequential damages of any kind, including but not
limited to loss of business or profit, when non- products have been, or are used.
AFCON AFCON
AFCON
NOT
ONLY
AFCON
CAD
1/08
Loading...