Afcon 087 User Manual
P.O. Box 3365 South El Monte, CA 91733 626.444.0541 Fax 626.444.3887 www. Afcon.org
087
SWAY BRACE ADAPTER
6”
6”
Maximum
Maximum
1/2”
077
1/2”
078
410
SIZE
- 1/2" bolt.
MATERIAL
FINISH
PATENT No. 6,629,678.
- Ductile .
Carbon Steel or (Pictured)
- Plain or E.G.
-
LISTING/APPROVAL -
203A-EX 2625, 203-EX 2551
FM
FM Approved - 1950
OSHPD
FUNCTION
- Sway brace adapter for an sway brace assembly
Designed to attach to the vertical or horizontal flange of a steel structural member
OPA-0601 See Website
AFCON .
.
.
Sway brace assemblies are intended to be installed in accordance with NFPA 13
and the manufacturer's installation instructions.
Additionally l
INSTALLATION -
isted as an 6” hanger attachment.
Per NFPA 13 and these instructions.
Load rating - see chart.
Combine with proper components- .
AFCON
The structural members design will dictate specific attachment criteria.
ASSEMBLY - See drawing.
Install set bolts finger tight, then additionally tighten 1/2 turn or torque to125 inch
pounds. Attach sway brace assembly with 1/2" bolt.
AFCON
see disclaimer below
087D Horizontal Load Ratings
Parallel 30 thru 90
Perpendicular 30 thru 90°°
°°
FEATURES
* Design conforms to angular geometry at panel point.
Fits 1/2" max.
* flange thickness.
ORDERING
Specific products are exclusively designed to be compatible with other products including parts and fasteners, resulting in a listed sway brace, restrainer or hanger assembly.
Be advised DISCLAIMER NOT
not manufactured or sold by . shall be liable under any circumstances whatsoever for any direct or indirect, incidental or consequential damages of any kind, including but not
limited to loss of business or profit, when non- products have been, or are used.
- Part # and finish.
AFCON AFCON
the following warranty restriction will apply. - will warrant against the failure of its products when used in combination with other products, parts or systems
AFCON AFCON
AFCON
NOT
ONLY
AFCON
9/11
087S Horizontal Load Ratings
Parallel 30 thru 90
Perpendicular 30 thru 90°°
°°
CAD
CAD
CAD
2765
2765
FM
3250
4500
2015
2015
Loading...