P.O. Box 3365 South El Monte, CA 91733 626.444.0541 Fax 626.444.3887 www. Afcon.org
085
SWAY BRACE ADAPTER
Radius - Tapped 1/2” orfice
Part B
SIZE
- 1/2" stud.
MATERIAL
FINISH .
PATENT No. 6,749,359
- Carbon Steel.
- Plain or E.G
-
Part A
LISTING/APPROVAL -
203A-EX 2625, 203-EX 2551
FUNCTION
OSHPD
Sway brace adapter for an sway brace assembly.
-
OPA-0601 See Website
AFCON
.
Designed to stabilize a 1/2" stud in the chord space of a steel structural member.
Sway brace assemblies are intended to be installed in accordance with
NFPA 13 and the manufacturer's installation instructions.
Additionally listed as an 8" hanger attachment.
INSTALLATION
- Per NFPA 13 and these instructions.
Load rating - see chart.
Combine with proper components- .
AFCON
see disclaimer below
The structural members design will dictate specific attachment criteria.
ASSEMBLY - See drawing.
1/2" threaded stud thru chord space into tapped part B. Install part A over
Insert
stud, engage sway brace assembly and nut. Engage mounting nut finger
AFCON
tight, then additionally tighten 1 1/2 turns or torque to 40 ft. Lbs.
Stud and nut furnished by customer.
*
FEATURES
* Radius - Tapped 1/2" orifice facilitates thread engagement.
ORDERING
- Part # and finish.
Horizontal Load Ratings
Parallel 30 thru 90
Perpendicular 30 thru 90°°
°°
2015
2015
Specific products are exclusively designed to be compatible with other products including parts and fasteners, resulting in a listed sway brace, restrainer or hanger assembly.
AFCON AFCON
the following warranty restriction will apply. - will warrant against the failure of its products when used in combination with other products, parts or systems
Be advised DISCLAIMER NOT
not manufactured or sold by . shall be liable under any circumstances whatsoever for any direct or indirect, incidental or consequential damages of any kind, including but not
limited to loss of business or profit, when non- products have been, or are used.
AFCON AFCON
AFCON
NOT
ONLY
AFCON
9/11
CAD
Loading...