Afcon 078 User Manual
P.O. Box 3365 South El Monte, CA 91733 626.444.0541 Fax 626.444.3887 www. Afcon.org
078
TRANSITION FITTING
LOCKING
9/16 Dia.
SIZE - BRACE PIPE
MATERIAL - S.S. (Type 304).
FINISH -
Carbon Steel or
Plain or E.G.
- 1" and 1 1/4" Sch. 40
Part # 077
LISTING/APPROVAL -
203A-EX 2625
FUNCTION -
Listed only for use with other bracing products.
FM
FM Approved
OSHPD
OPA-0601-07 See Website
Adapts the sway brace fitting to the brace pipe in an
AFCON
.
AFCON
sway brace assembly. Sway brace assemblies are intended to be installed in
accordance with NFPA 13 and the manufacturer's installation instructions.
Common component in an AFCON longitudinal sway brace - .
INSTALLATION -
Per these instruction
including NFPA 13 and 13R.
see drawing
Load rating - see chart.
The required type, number and size of fasteners used to structure attachment
fitting shall be in accordance with NFPA 13.
DO NOT BEND - If angle required use part #070, #076 or #077
.
ASSEMBLY
Combine with proper components.
AFCON
Insert brace pipe into fitting against the pivot bolt .
Tighten set bolt until head contacts bracket.
FEATURES
Visual inspection, verifies proper installation.
*
Bolt hole fits #410/411 sway brace fitting.
*
ORDERING -
Part #, pipe size and finish.
Part # 078
Part # 410
Horizontal Load Ratings
Size
1-11/4
FM
1200
2015
Specific products are exclusively designed to be compatible with other products including parts and fasteners, resulting in a listed sway brace, restrainer or hanger assembly.
AFCON AFCON
the following warranty restriction will apply. - will warrant against the failure of its products when used in combination with other products, parts or systems
Be advised DISCLAIMER NOT
not manufactured or sold by . shall be liable under any circumstances whatsoever for any direct or indirect, incidental or consequential damages of any kind, including but not
limited to loss of business or profit, when non- products have been, or are used.
AFCON AFCON
AFCON
NOT
ONLY
AFCON
8/11
CAD
Loading...