Afcon 077 User Manual

P.O. Box 3365 South El Monte, CA 91733 626.444.0541 Fax [phone] www. Afcon.org

077

ATTACHMENT FITTING

LOCKING

17/32"

SIZE - BRACE PIPE
MATERIAL ­FINISH -

Carbon Steel, Ductile Iron or

Plain or E.G.

: 1" and 1 1/4" Sch. 40

S.S. (Type 304).

17/32"

LISTING/APPROVAL -

203A-EX2625

FUNCTION

FM

FM Approved
OSHPD

- Structure attachment fitting of an sway brace assembly.

- 1950

OPA-0601-07 See Website

AFCON

.

Sway brace assemblies are intended to be installed in accordance with
NFPA 13 and the manufacturer's installation instructions.

INSTALLATION - Per these instructions

including NFPA 13 and 13R.

Load rating - see chart.

Install fasteners in accordance with NFPA 13.

ASSEMBLY

Combine with proper components- .

AFCON

see disclaimer below

Insert brace pipe into fitting against the pivot bolt.
Tighten set bolt until head contacts bracket.

FEATURES

* Swivel allows attachment at any angle.
* Visual inspection, verifies proper installation.
* Larger fastener hole available.- Consult factory.

ORDERING -

Part #, pipe size and finish.

Horizontal Load Ratings

Base

Material
Ductile
Steel

FM

1500

---

2015
2015

Specific products are exclusively designed to be compatible with other products including parts and fasteners, resulting in a listed sway brace, restrainer or hanger assembly.

AFCON AFCON

the following warranty restriction will apply. - will warrant against the failure of its products when used in combination with other products, parts or systems

Be advised DISCLAIMER NOT

not manufactured or sold by . shall be liable under any circumstances whatsoever for any direct or indirect, incidental or consequential damages of any kind, including but not
limited to loss of business or profit, when non- products have been, or are used.

AFCON AFCON

AFCON

NOT

ONLY

AFCON

11/11

CAD

CAD
CAD