Afcon 076 User Manual

P.O. Box 3365 South El Monte, CA 91733 626.444.0541 Fax [phone] www. Afcon.org

076

ATTACHMENT FITTING

UNIVERSAL LOCKING

17/32"

17/32"

SIZE - BRACE PIPE

- 1" thru 2" Sch. 40

May be used with strut channel and structural steel.

MATERIAL
FINISH

- D Carbon Steel .

uctile iron and

- Plain or E.G.

LISTING/APPROVAL -

203A-EX 2625

FM

FM Approved

.

FUNCTION

OSHPD

-

Structure attachment fitting of an sway brace assembly.

OPA-0601-07 See Website

AFCON

Sway brace assemblies are intended to be installed in accordance with
NFPA 13 and the manufacturer's installation instructions.

INSTALLATION - Per these instructions

including NFPA 13 and 13R.

Load rating - see chart.

The required type number and size of fasteners used for the structure
attachment fitting shall be in accordance with NFPA 13.

ASSEMBLY

Combine with proper components.

AFCON

Insert brace element into fitting snug against back of jaw.
Install set bolt finger tight, then additionally tighten 1 1/2 turns or torque to 40 ft. lbs.

FEATURES

* Swivel allows attachment at any angle.
* Larger fastener hole available.- Consult factory.

ORDERING ,

- Part #, pipe size material and finish.

Horizontal Load Ratings

Base

Material
Ductile
Steel

FM

3250

---

2765
2015

Specific products are exclusively designed to be compatible with other products including parts and fasteners, resulting in a listed sway brace, restrainer or hanger assembly.

AFCON AFCON

the following warranty restriction will apply. - will warrant against the failure of its products when used in combination with other products, parts or systems

Be advised DISCLAIMER NOT

not manufactured or sold by . shall be liable under any circumstances whatsoever for any direct or indirect, incidental or consequential damages of any kind, including but not
limited to loss of business or profit, when non- products have been, or are used.

AFCON AFCON

AFCON

NOT

ONLY

AFCON

8/11

CAD