Aethra D2500 DATASHEET

D2500

f

A

Telecom Analyzer

ISDN & Telecom standards

On board support for multiple protocols

WAN & DATACOM

Leased line & Datacom
Pre-Qualification Testing

Flexible Operation

Control all Functions locally
or via Remote Control

The D2500 Telecom Analyzer is the
culmination of thirty years o
experience that Aethra has in the
development and production of test
instruments.
It has been designed to meet the
requirements of technicians working
in the Telecoms industry, and its
range of capabilities makes it an
indispensable toolkit - probably the
only tester the engineer needs to
carry around with him.

Wide Range of Features

The D2500 to address a wider range of applications such as Service
Verification over PRI, BRI, Frame Relay Links, WAN and ISDN lines,
and also testing of DCE/DTE connections over a range of interfaces.

dditionally, testing for G.SHDSL, HDSL and IP across the Internet is

also provided.

Graphic Interfaces

The new, improved Graphical User Interface uses smart windows
drop-down menus. This makes navigating around the configuration
procedures extremely easy and minimizes time required to achieve
proficiency with the tester.

Smart Status™

This feature is always available - even while a test is in progress, thus
allowing continuous monitoring of clock frequency, alarms, errors,
PCM time-slot status, channel configurations and test parameters, as
well as the unit’s own device status.

D2500

Technical Specifications

Telecom Interfaces

• Basic Rate Access

- S/T : ITU-T Rec.I.430, ETS 300 012

- U : 2B1Q and 4B3T, TS 102 080

• Primary Rate Access

- Interface CCITT G.703 (2Mbps) / G.704

- E1 : ITU-T Rec.I.431, ETS 300 011

- 2Mbit : PCM30/CRC, PCM31/CRC, Unframed

• WAN/Datacom (option)

- Sync : X.21/V.11, V.24, V.35, V.36 (RS449), G.703 co­ dir

- Bit Rates : 50bps - 2048Kbps (Nx64)

- Async V.24 (RS232)

- Bit Rates : 50bps - 230400bps

- V.11/X.21 interface : Integrated on board (VX21-2500
option)

- Clock frequency Measurement (±1Hz) and shift
management (±100ppm)

Protocols Supported

• Simulation mode : EDSS-1, Q.SIG, 1TR6, TN1R6®, VN4,

X.25, X.31, DASS-2, DPNSS, CorNet
PPP, IP, UDP, DHCP, ICPM, TFTP, HTTP, FTP, Frame
Relay,

• Monitor mode : EDSS-1, Q.SIG, 1TR6, TN1R6
X.25, X.31, DASS-2, DPNSS, CorNet

• Other protocols available : V.5.1, V.5.2, NI1, DMS100,
5ESS

Operating Modes Available

• Basic Rate Access : BRI TE-S, BRI MON-S, BRI NT-S,
BRI NT-U, BRI MON-U (D2022 option), BRI LT-U (LTU-
2K option), BRI S/T-Bus wiring test, (WT2000 option)

• Primary Rate Access : PRI TE-E1, PRI MON-E1, PRI
MON-E1 PMP, PRI NT-E1, • POTS/Analog TE (AB2000N
option), MON (AB2000N option)

• V/X : DTE, DCE (VX2000 and VX21-2500 option when
required)

• Pattern generation : Single, n x 64Kbit timeslot

Smart Status™

• G.826/M.2100 (only PRI) : ES, SES, BBER, UAS

• ISDN line : Layers 1, 2, 3 and B ch status

• V/X interface : Control leads, test running, loop, clock
frequency, clock phasing

• 2Mbit : FAS, NFAS, MFAS, NMFAS, alarms, errors, sync,
CAS channel status,

• Frame Relay (FR2K) : DLCI, LMI, and quality test

Background Monitor

• Modes : High impedance and during simulation

• Protocol analysis on-board

• Programmable filters : Independent filters’ capturing and
displaying

• Statistics information

• Analysis of the results : stored on PC PC108 for
Windows

™

Automatic Access Test

• Fully automated Access test

• Supplementary services automatic test

• Programmable test sequence

Bit Error Rate Test

• G.821 statistics : ES, SES, US, DM, PASS/FAIL, S-LOSS

• Pseudo-Random bit sequences User : definable 211-1,
215-1, 223-1, All 0’s, All 1’s, 10101010, 16 bit octet,
HDLC frame

• Error Injection : Manual, Automatic, Single

®-N, -NX, -NQ, -T,

®, VN4,

®-N, -NX, -NQ, -T,

Manual sending

• Types : Bit, LFA, LOS, AIS, NMFAS, Sa, RAI (A bit), E
bit, CRC, CV, control leads

Generate Traffic

• Number of cycles : Up to 65535

• Number of parallel calls : Up to 30 (PRI)

• Delay between calls : User selectable

X.25/X.31

• Modes : SVC, PVC

• Logical Types : DTE, DCE

• Tests : Traffic generator, Echo port

IP

• Modes : IP routed, IP over PPP (Client and Server)

• IP address supported : Static, Dynamic

• Authentication protocol :

• Protocols : IPv4, UDP, DNS, DHCP, ICMP, TFTP, HTTP,
FTP

Frame Relay (FR2K)

• Frame Relay Forum : FRF.1.1, FRF.3.1, FRF.12.1,
FRF.14

• Type of traffic : IP, IP over PPP

• LMI : ITU-T Q.933, ANSI T1.617, original LMI CISCO

• Logical Types : UNI, CPE, NNI

• QoS statistics : FECN, BECN, DE, NLPID, DLCI, FRF.12

U-BUS loop qualification

• U-Bus voltage measurement

• Loop resistance measurement (Ω)

• Programmable simulation “NT-load” over U-Bus

• Activation/Deactivation time measurement (msec.)

History and predefined tests features

Saving and recalling of 10 different setup and results
for each kind of test

Connectors

• Primary Access interface : RJ45 120Ω, BNC 75Ω

• V.11/X.21 : DB-15

• S/T Basic Access interface : RJ45 (ISO 8877)

• U Basic Access interface : RJ45 (ISO 8877)

• RS232 : DB-9 (V.28 CCITT ISO4902)

• Handset : 4 wires RJ9. Balanced, 600Ω

• Power in : External AC/DC adapter

• Power out : Mini-DIN 4 wires connector

Environmental characteristics

• Dimension

- Weight, with battery : 1 kg

- Dimensions with holster (mm) : 130(w)x260(l)x65(d)

• Power

- Battery Type : Rechargeable, Ni-MH

- Battery life : 3 hours @ 25°C, LCD back-lit off

- External AC/DC adapter : 115/230Vac ±10%@50/60Hz

Temperature

• Storage/Transport : - 40°C to +70°C

• Operating, nominal : - 5°C to +45°C

• Operating, limits : -10°C to +55°C

• Humidity, non-condensing

- ≤ 93% RH @ 40°C

- ≤ 70% RH @ 55°C

• User's Safety Aspects : EN 61010-1,EN 60950, EN 41003

• EMC Aspects : EN 55022, EN55024, EN 61000-3-2 / -3-3

• CE Marking : Class B (residential devices)

PAP, CHAP (MD5)

Miscellaneous

• LCD display : 240x200 Graphic display wide bright an
back-lit

• Internal microphone & loudspeaker

• Upgradable firmware

• MultiMediaCard

Options

• INET2500 : HTTP, FTP Internet download

• VX21-2500 : X.21 / V.11 interface

• WT2000 : S0/T0 wiring test

• AB2000N : Analog (POTS) line adapter

• LT-U2K : BRI LT-U simulation

• D2022-Q : BRI U (2B1Q) interface monitor

• D2022-T : BRI U (4B3T) interface monitor

• MMC2000 : MMC Memory extention

• VX2000 : DTE/DCE Datacom tester

• FR2K : Frame Relay test suite

• PC108XP EXPERT license : More performing version for
protocol analysis and remote management

• KCX21-DXE2500 : X21/VII DTE/DCE CABLE KIT

• KCX2K-DTE

- Cable Kit for VX2000

- DTE simulation mode

• KCX2K-DCE

- Cable Kit for VX2000

- DCE simulation mode

TM

memory extension MMC2000 Option

A TLC Srl
Legal Office

via Giovanni Battista Martini, 2
00100 Roma (Italy)

All information provided by A TLC in this datasheet is believed to be accurate. A TLC Srl reserves the right to discontinue and change specifications and prices at any time without prior notice.
Copyright © 2010 A TLC Srl - all rights reserved.

Operating Office

via Matteo Ricci, 10
60126 Ancona (Italy)
Telephone [phone]

Email:[e-mail]

www.aethra.com

Code 071072016GB Rev.1 (07/10)