Aervoe Deluxe Induction Cooktop User Manual

Section 5 ___________________________________________________

CARE AND MAINTENANCE

• Do Not clean with metal souring pads, abrasives, or solvents

• Stainless steel cleaner is recommended on the body

• Do Not immerse cord or unit in water or other liquids

• Unplug when not in use and before cleaning

• Allow unit to cool before storing

• Do not place objects heavier than 50 pounds on the glass cooktop

• Do Not use if ceramic cooktop or power cord is damaged

• Keep away from other sources of heat

Unplug and let cool before cleaning. Use a mild liquid detergent with a moist cloth to wipe off
grease and stains. Let dry. Cover the unit to protect it from dust when being stored.

Section 6 ___________________________________________________

TROUBLESHOOTING GUIDE & CUSTOMER SERVICE

If after reviewing the troubleshooting guide the problem is not resolved, do not attempt to repair
yourself. Contact your dealer or call our Customer Service Department at 1-800-227-0196 for
additional information.

After plugging in the power cord, the Power Indicator light does not illuminate
and/or the exhaust fan is not running.

• The plug may be loose in the electrical outlet

• Check your circuit breaker. It may be inoperative.

The power indicator light is on, but the fan is not running and the cookware is
not heating up.

• The cookware is unsuitable and it is preventing operation (see Selecting the Proper
Cookware)

• The pan needs to be centered on the ceramic plate

• The ceramic plate may be cracked

The induction cooktop suddenly stops heating during operation and shuts down.

• The overheating sensor detected an excessive high surface temperature and caused it to
automatically shutdown. Heating empty cookware may cause this.

• The air inlet or exhaust fan is blocked and caused it to overheat

• The unit was accidentally unplugged

• The fuse or circuit breaker has malfunctioned

Error code guide:

If an error code appears in the LED display, follow the instructions for the particular problem.

E0 = Cookware Sensor Detection

Proper cookware is not detected.
Remedy: Place correct cookware back on the cooktop within 30 seconds to reset. Unplug

from the power receptacle. Wait one minute and connect power supply and restart unit,
assuring first that proper cookware is placed on cooktop.

E01 = Internal Overheat Sensor

Internal temperature exceeds operation limit, cooling fan malfunction, or inadequate ventilation
for the cooktop.
Remedy: Unplug from the power receptacle. Make sure that the fan is at least 4” away from

any obstruction. Wait 10 minutes for the cooktop and cookware to cool down, and then plug
it back into the 120V power receptacle. Make sure the fan is running.

E02 = Glass Cooktop Overheat Sensor

Glass cooking surface temperature exceeds the limit of 450°F (232°C), and shuts down after
one minute.
Remedy: Unplug from the power receptacle. Wait 10 minutes for cooktop and cookware to

cool down and reconnect to the power receptacle. Restart, checking that the cooling/exhaust
fan is running and at least 4” away from any obstruction. If the error continues, try using
another size of cookware.

E03 = Incorrect Voltage Sensor

The 120V input power supply is too high or too low voltage and shuts down after one minute.
Remedy: Unplug from the power receptacle. Using voltage sensor, verify that the voltage is

110/120V AC. If not, switch electrical outlets or correct before operating the unit.
Note: If any of the above remedies fail to correct the problem, please contact Customer Service
at 1-800-227-0196.

4

Section 7 ___________________________________________________

Commonly asked questions

What are the advantages of using an induction cooktop?

The induction cooktop plugs into a standard 110/120-volt outlet. With 1800 watts of power,
these cooktops are nearly 50% more powerful than gas stoves and heat nearly twice as fast as
electric cooking elements, yet they do not require high amperage electrical lines or 220-volt
power.

Is induction cooking more efficient than gas?

The induction cooktop is 83% energy efficient. Gas burners are only 30-35% efficient and butane
burners cost $1.65 per hour to operate. Operating an induction cooktop costs only 12 cents per
hour.

Is induction cooking safe?

The induction cooktop creates heat only in the cooking pan. There is no open flame or hot
cooking element. The ceramic top stays cool, except where it is in contact with the cooking pan.

How much electrical power is needed?

All single burner induction units designed for the U.S. market are capable of operating efficiently
on a standard 110/120-volt outlet. However, since each unit will draw about (15 amps), it is
strongly recommended that a dedicated outlet be provided for each individual unit being used.

What type of pans can I use?

Pans made from ferrous metals such as cast iron, sheet enameled steel, or magnetic stainless
steel work very well (see Section 3).

How does electric and induction cooking compare?

Induction units place the electrical energy directly into the cooking pan. Resistive electric cooking
elements use energy to heat the elements and then through conduction, the cooking pan gradually
gets hot. Resistive elements are very inefficient and not responsive. Induction cooking is very
rapid and responsive to temperature control changes and even faster and more efficient than
gas cooking.

Is it easy to use?

The rapid heating of the pan makes warming, sautéing, frying, and pasta cooking fast and easy
to do. With no open flame or heating elements, there is no burned-on food to clean. Just wipe
the ceramic surface.

Section 8 ___________________________________________________
SPECIFICATIONS

Power Source...............120V/60Hz 15 amp circuit

Output ....................................... 500 – 1800 watts

Power Levels.............................................. 1 – 10

Temperature Range 100°F – 450°F (38°C – 232°C)

Weight.............................................. 6 lbs., 12 oz.

Dimensions ................ 13.3” L x 12.5” W x 2.6” H

Cord Length ................................................... 5 ft.

Glass Cooktop Dimensions ..............9.75” x 11.5”

Aervoe Industries, Inc.

Gardnerville, NV 89410 • [phone]

CS: 5/3/13 Max Burton is a registered trademark of Aervoe Industries, Inc.

www.aervoe.com • [e-mail]

Safety Features

1 Non-suitable cookware detection
2 Overheat protection
3 Improper voltage supply detection

Approvals

ETL approved to UL 1026 requirement
FCC approved to Part 18
Certified to CSA Std. C22.2 No. 64

5

DELUXE INDUCTION COOKTOP

OPERATING INSTRUCTIONS

TABLE OF CONTENTS

Page

Section 1 Important Warnings & Safeguards.................................1

Section 2 Parts Identification .........................................................1

Section 3 Selecting the Proper Cookware ......................................2

Section 4 Operating Instructions....................................................2

Section 5 Care & Maintenance.......................................................4

Section 6 Troubleshooting Guide & Customer Service...................4

Section 7 Commonly Asked Questions ..........................................5

Section 8 Specifications.................................................................5

MAX BURTON® DELUXE INDUCTION COOKTOP #6200

Section 1

Important Warnings & Safeguards

Read all instructions thoroughly before operating this unit to avoid injury to self or property
and avoid damage to the unit. Keep instructions handy for reference during use.

CAUTION: This unit emits an electromagnetic field. Persons with cardiac implanted pacemakers
or other implantable heart devices should consult with their physician before using.

Electrical Hazards

• Do Not submerge unit or electrical cord in liquid, touch with wet hands, or use in a wet

• Do Not use if cooktop is cracked

• Do Not operate if the cord has frayed and wires are exposed

• Do Not let cord hang over the edge of a table or counter

• Never move the unit by pulling on the power cord

Personal Safety

• Do Not touch the hot cooktop surface or cookware. It may remain hot for several

• Do Not move the unit during cooking or with hot cookware on top

• Do Not place metal objects on the cooktop other than metal cookware or our Max Burton

• Do Not heat unopened cans of food. The container could explode.

• Do Not use in or around flammable or explosive environments.

• Administer close supervision when operating around children

• Electric shock hazard. Only qualified experts may perform repair and maintenance work

Product & Property Damage

• Do Not heat any empty containers on the cooktop

• Do Not place objects heavier than 50 pounds on the glass plate

• Do Not block the air inlet or exhaust fan

• Do Not operate on flammable surfaces

• Do Not clean in a dishwasher

• Do Not use the unit for other than its intended use

• Do Not place objects with a magnetic strip near the unit while in operation.

• Use a dedicated 120V, 15 amp electrical outlet that is not shared with other appliances to

• Keep the rear and sides of the unit at least 4” from walls for proper ventilation

Section 2 ___________________________________________________

PARTS IDENTIFICATION

___________________________________________________

outdoor environment

minutes after use.

Induction Interface Disk. Do Not place the cooktop on any metal surface. Metal surfaces
and other metal accessories may become very hot during cooking.

on the unit. Never attempt to repair yourself.

avoid overheating or shutdown

COOKWARE PLACEMENT GUIDE

FUNCTION BUTTON

POWER

INDICATOR

TEMPERATURE FUNCTION INDICATOR

ON/OFF

BUTTON

TIMER FUNCTION INDICATOR

GLASS PLATE

COOL AIR INLET & FAN

POWER FUNCTION

INDICATOR

INCREASE & DECREASE BUTTONS

1 2 3

WARM AIR

EXHAUST FAN

LED DISPLAY

110V ELECTRICAL

CORD AND PLUG

CONTROL

PANEL

FCC REQUIREMENTS

Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment

NOTE: This equipment has been tested and found to comply with the limits for consumer ISM
equipment, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.

If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect to an outlet on a circuit different from the receiver

• Consult the dealer or an experienced radio/TV technician for help.

Section 3 ___________________________________________________

SELECTING THE PROPER COOKWARE

NOTE: Your induction cooktop will not operate without the proper cookware. The following
properties and configurations are essential to provide maximum efficiency for your unit. In
general if a magnet will stick to the bottom of the cookware, the cookware will work on your

induction cooktop.

1. The outside surface must be made of ferrous magnetic materials including cast iron, carbon
steel, and magnetic stainless steel (18/0)

2. Flat bottom surface. An uneven surface will not work.

3. Minimum bottom diameter of 4”; Maximum recommendend diameter of 13”

SUITABLE COOKWARE

Cast Iron Pot Magnetic Magnetic
Stainless Steel Pot Stainless Steel/Enamel

Iron/Steel Frying Pan Iron Tray/Grille Iron Enamelware

UNSUITABLE COOKWARE

Material: Glass, Ceramic, Copper, Aluminum, Non Magnetic S/S (18/10, 18/8)

1.5” 1.5” 4” 4”

Size and Form

Diameter 4” minimum

Cookware should have

a flat surface.

Unsuitable Size and Form

Cookware of which the

height from

induction plate is

over 1.5” and the bottom

diameter is less than 4”.

Section 4 ___________________________________________________

OPERATING INSTRUCTIONS

If the unit doesn’t operate as intended, please see the Troubleshooting Guide in section 6.

CAUTION:

110/120V and will require 15 amps. For optimum performance of your unit, use only
one appliance per outlet. NEVER HEAT AN EMPTY PAN. This will immediately cause
overheating to occur, which can damage the cookware and cause the unit to shut off.

Setup

ALWAYS USE A DEDICATED OUTLET. This unit is designed to operate on

1. Place the unit on a dry, stable and level surface at least 4 inches away from walls to allow
proper ventilation from the COOL AIR INLET and WARM AIR EXHAUST FAN. Never place
on a flammable surface (table cloth or carpet).

2. Plug the POWER CORD into a 120V/15 amp electrical socket. The red POWER INDICATOR
light will illuminate.

3. Before turning the unit on, make sure the ingredients are in the proper cookware, it is on
the GLASS PLATE and centered over the COOKWARE PLACEMENT GUIDES. See Selecting
the Proper Cookware section above.

4. To turn the power on, press the ON/OFF button once. The fan will run and the default power
setting of 5 will appear in the LED DISPLAY.

5. After cooking is completed, press the ON/OFF button to turn off the unit. The LED DISPLAY
will turn off. The fan will continue running until the unit has cooled.

CAUTION: The cooking surface will remain hot for several minutes after the pan has been removed.

NOTE: The power will completely shut off and beep within 1 second if either (a) the wrong type of cookware

is applied, or (b) no cookware is placed on the unit (see Selecting the Proper Cookware section left).

This unit offers two methods of precise and efficient cooking using built-in computer
controls and an automatic timer.

10 Power Modes
10 Temperature Modes from 100° to 450°F (38° to 232°C).
180-minute Timer

POWER MODE OPERATION

The POWER MODE function works independently from the temperature mode function. The power
selected directly relates to the amount of wattage or the BTU/HR equivalent the cooktop uses. As
you increase the power level, the cooking speed is increased, and more wattage is used.

• To select the POWER MODE function, press the FUNCTION button until the Power Mode LED is
illuminated. The default power level setting is 5. Press the up or down buttons to adjust power
level from 1–10.

• In the Power Mode, the temperature of the food being cooked is not regulated; only the power
being used is set. For example, if you want to bring a pot of water to a boil quickly (higher power
level), or a specific cooking temprature is not required, use the power level setting.

• If a specific cooking temperature is required, it is recommended that you use the TEMPERATURE
MODE function.

• To avoid over-cooking or burning food, it is recommended that you start with a low power level
setting and increase to a higher setting if required, until you become familiar with the performance
of the cooktop.

POWER WATTS COOKING
LEVEL LEVEL

1 200 Simmer - keep warm
2 500 Simmer - keep warm
3 800 Low
4 1000 Medium-low
5 1200 Medium-low

POWER WATTS COOKING

LEVEL LEVEL

6 1300 Medium-high
7 1400 Medium-high
8 1500 High
9 1600 High
10 1800 High

TEMPERATURE MODE OPERATION

The TEMPERATURE MODE function works independently from the power mode function. The
Temperature Mode should be used when a specific cooking temperature is required. Once the
cookware has reached this temperature, the unit self-regulates by turning the internal cooling
fan on and off to maintain the desired cooking temperature.

• To select the TEMPERATURE MODE function, press the FUNCTION button until the Temperature
Mode LED is illuminated.

• The default temperature level setting is 250°F (115°C). Press the up or down buttons to adjust
temperature level from lowest to highest settings. Cooking in the Temperature Mode is recommended
when a desired temperature must be maintained. To keep warm put on setting #1.

TEMP TEMP TEMP
SETTING °F °C

1 100 38
2 150 66
3 210 99
4 250 124
5 280 137

TEMP TEMP TEMP

SETTING °F °C

6 320 160
7 360 182
8 390 199
9 430 221
10 450 232

COOKING WITH INDUCTION INTERFACE DISKS

T

he Induction Interface Disk (#6010) is an accessory that allows you to use cookware that is not
induction-rated (not ferrous or magnetic metal). It acts as an interface between your non-magnetic
cookware and the induction cooktop to transfer the heat to the non-magnetic cookware. When
cooking in this manner, you can expect efficiency to drop compared to using induction-rated
cookware. The benefit is that you don’t have to replace your current cookware. Item #6010 is sold
separately, and is available on our website at www.aervoe.com.

180-MINUTE AUTOMATIC TIMER

1. To use the automatic timer with either Temperature or Power Mode, press the FUNCTION
button until the TIMER light illuminates red and “0” will appear in the LED DISPLAY.

2. Use the INCREASE and DECREASE buttons to set the time. Time increases or decreases
by 1 minute each time the increase button is pressed. This allows for quick increase of
time and adjustment down if necessary.

3. The time may be adjusted up or down at any time during operation.

4. When the time has expired, the timer will beep and the cooktop will turn off.