AEROTRAK 7010 User Manual

AEROTRAK®+ REMOTE

RELIABLE MEASUREMENT

CONFIDENT RESULTS

ACTIVE AIR SAMPLER

MODEL 7010

TSI® AeroTrak®+ 7010 Remote Active Air Sampler (AAS)
oers aseptic manufacturers condent and reliable
microbial monitoring in pharmaceutical manufacturing
Grade A and B environments with external vacuum
systems. With active ow measurement and proactive
ow alarms, the AAS allows cleanroom technicians to
correct facility conditions before monitoring is aected
to reduce production waste. The AAS integrates into TSI
Facility Monitoring Software to put critical data at your
ngertips – without worry of data interruption or loss.

Features & Benets

RELIABLE MEASUREMENT

+ Easy compliance with FDA cGMP and EU GMP regulations

by way of low d50 (0.8 µm) and active ow measurement

+ Quick corrective action driven by real-time ow measurement

warnings—e.g., kinked tubing, vacuum loss, etc.

+ Design specic for Grade A and B environments with traceable

materials and thoughtful accessories

+ Reduced interventions to change agar plates through

intermittent sampling

CONFIDENT RESULTS

+ Complete environmental monitoring system by TSI with

integrated total particle and microbial monitoring

+ Hassle-free data integrity with FMS Software integration

and automated, sample-based reporting

+ Secure shareability—OPC UA interface to LIMS

+ Distributed architecture without common points of failure

+ No lost data—sampling completes even if network fails

CONFIDENT, RELIABLE, NO-HASSLE
COMPLIANCE & DATA INTEGRITY

TSI Complete Facility Monitoring Systems
Learn more at www.tsi.com/reliablesystem

UNDERSTANDING, ACCELERATED

SPECIFICATIONS

AEROTRAK®+ REMOTE ACTIVE AIR SAMPLER
MODEL 7010

Flow Rate 28.3 LPM (1.0 CFM)

with ±5% accuracy

Sampling Method Sieve impaction

d

50

Sampling Continuous or Intermittent

Vacuum Source External vacuum > 15 in.

Control Box Enclosure Stainless steel

Sample Head
(Base and Cap) 316L SS

Recommended Tubing
(Between Sample Head
and Control Box) 0.5 in. ID x 0.625 in. OD

Agar Plate
Recommended
Dimensions 90 mm agar plate, deep ll (27 ml)

Standards CE

Operating Environment Indoor use only

Temperature 50° to 104°F (10° to 40°C)
Relative Humidity 20% to 95% non-condensing
Altitude <10,000 ft. (3,050 m)
Pollution Degree 1

Communication TSI FMS5 Monitoring System

Status Indicator Power, ow, sample and ethernet

Data Storage 256,000 sample records

Dimensions

Sample Head 4.5 in. x 3.4 in.

Control Box (H x W x D) 5.6 in. x 4.5 in. x 2.6 in.

0.8µm per ISO 14698-1:2003

(38.1 cm) of Hg

20 m maximum length

(11.4 cm x 8.6 cm)

(14.2 cm x 11.4 cm x 6.7 cm)

Weight

Sample Head 1.3 lb. (0.59 kg)
Control Box 2.3 lb. (1.05 kg)

Power Power-over-Ethernet (PoE

compliant with IEEE 802.3at)
or 12-24 VDC @ 30W

Relay Load 0.5 A at 125 VAC; 2 A at 30 VDC
Overvoltage Category II

Storage Range 14° to 122°F (-10° to 50°C) /

Up to 98% non-condensing

Included Accessories Power connector, 90 mm plate

standos, and operating manual
and conguration utility on
USB ash drive

Optional Accessories Sample cap, power supply, plate

holder, exhaust lter, sanitary tting
inlet, tri-clamp ttings, alarm cable,
sample tubing, vacuum tubing and
mounting bracket

NO INTERRUPTIONS.
NO DATA LOSS.
NO-HASSLE COMPLIANCE.

Complete facility monitoring systems oered by TSI.

Learn more at www.tsi.com/reliablesystem

1

Monitor

OPC UA

Client/Server

UNDERSTANDING, ACCELERATED

TSI Incorporated

USA Tel: [phone]
UK Tel: [phone]
France Tel: [phone]
Germany Tel: [phone]

P/N 5002612 Rev B ©2021 TSI Incorporated

Printed in U.S.A.

- Visit our website www.tsi.com for more information.

India Tel: [phone]
China Tel: [phone]
Singapore Tel: [phone]

2

Client

3

Database

AeroTrak, TSI and the TSI Logo are registered trademarks
of TSI Incorporated in the United States and may be
protected under other country’s trademark registrations.