AeroTrak 7201, 7301, 7501, 7310, 7510 User Manual
...
AEROTRAK®+
REMOTE PARTICLE COUNTER
MODELS 7201/7301/7501/7310/7510
MODELS 6201/6301/6501
OPERATION MANUAL
P/N 6012577 REVISION C
MAY 2020
AEROTRAK®+
REMOTE PARTICLE COUNTER
MODELS 7201/7301/7501/7310/7510
MODELS 6201/6301/6501
OPERATION MANUAL
P/N 6012577 REVISION C
MAY 2020
SHIP TO/MAIL TO:
TSI Incorporated
500 Cardigan Road
Shoreview, MN 5512A-3996
USA
U.S.
Technical Support:
(800) 680-1220/(651) 490-2860
Fax:
(651) 490-3824
E-mail address:
technical.services@tsi.com
Website:
http://www.tsi.com
INTERNATIONAL
Technical Support:
(001 651) 490-2860
Fax:
(001 651) 490-3824
ii
Manual History
The following is a manual history of the AeroTrak®+ Remote Particle
Counter, Models 7201/7301/7501/7310/7510/6201/6301/6501
Operation Manual (P/N 6012577).
Revision
Date
A
May 2019
B
December 2019
C
May 2020
iii
Warranty
Part Number
6012577 / Revision C / May 2020
Copyright
©TSI Incorporated / 2019-2020 / All rights reserved.
Address
TSI Incorporated / 500 Cardigan Road / Shoreview, MN 55126 / USA
E-mail Address
answers@tsi.com
Limitation Of Warranty And Liability
(effective April 2014)
(For country-specific terms and conditions outside of the USA, please visit www.tsi.com.)
Seller warrants the goods, excluding software, sold hereunder, under normal use and
service as described in the operator's manual, to be free from defects in workmanship and
material for 24 months, 60 months laser replacement, and 12 months for Part
Number 7510-22050V, from the date of shipment to the customer. This warranty period is
inclusive of any statutory warranty. This limited warranty is subject to the following
exclusions and exceptions:
a. Hot-wire or hot-film sensors used with research anemometers, and certain other
components when indicated in specifications, are warranted for 90 days from the date of
shipment;
b. Pumps are warranted for hours of operation as set forth in product or operator’s
manuals;
c. Parts repaired or replaced as a result of repair services are warranted to be free from
defects in workmanship and material, under normal use, for 90 days from the date of
shipment;
d. Seller does not provide any warranty on finished goods manufactured by others or on
any fuses, batteries or other consumable materials. Only the original manufacturer's
warranty applies;
e. This warranty does not cover calibration requirements, and seller warrants only that the
instrument or product is properly calibrated at the time of its manufacture. Instruments
returned for calibration are not covered by this warranty;
f. This warranty is VOID if the instrument is opened by anyone other than a factory
authorized service center with the one exception where requirements set forth in the
manual allow an operator to replace consumables or perform recommended cleaning;
g. This warranty is VOID if the product has been misused, neglected, subjected to
accidental or intentional damage, or is not properly installed, maintained, or cleaned
according to the requirements of the manual. Unless specifically authorized in a
separate writing by Seller, Seller makes no warranty with respect to, and shall have no
liability in connection with, goods which are incorporated into other products or
equipment, or which are modified by any person other than Seller.
The foregoing is IN LIEU OF all other warranties and is subject to the LIMITATIONS stated
herein. NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR
PARTICULAR PURPOSE OR MERCHANTABILITY IS MADE. WITH RESPECT TO
SELLER’S BREACH OF THE IMPLIED WARRANTY AGAINST INFRINGEMENT, SAID
WARRANTY IS LIMITED TO CLAIMS OF DIRECT INFRINGEMENT AND EXCLUDES
CLAIMS OF CONTRIBUTORY OR INDUCED INFRINGEMENTS. BUYER’S EXCLUSIVE
REMEDY SHALL BE THE RETURN OF THE PURCHASE PRICE DISCOUNTED FOR
REASONABLE WEAR AND TEAR OR AT SELLER’S OPTION REPLACEMENT OF THE
GOODS WITH NON-INFRINGING GOODS.
TO THE EXTENT PERMITTED BY LAW, THE EXCLUSIVE REMEDY OF THE USER OR
BUYER, AND THE LIMIT OF SELLER'S LIABILITY FOR ANY AND ALL LOSSES,
INJURIES, OR DAMAGES CONCERNING THE GOODS (INCLUDING CLAIMS BASED
ON CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) SHALL BE
THE RETURN OF GOODS TO SELLER AND THE REFUND OF THE PURCHASE PRICE,
OR, AT THE OPTION OF SELLER, THE REPAIR OR REPLACEMENT OF THE GOODS.
IN THE CASE OF SOFTWARE, SELLER WILL REPAIR OR REPLACE DEFECTIVE
SOFTWARE OR IF UNABLE TO DO SO, WILL REFUND THE PURCHASE PRICE OF
THE SOFTWARE. IN NO EVENT SHALL SELLER BE LIABLE FOR LOST PROFITS,
BUSINESS INTERRUPTION, OR ANY SPECIAL, INDIRECT, CONSEQUENTIAL OR
INCIDENTAL DAMAGES. SELLER SHALL NOT BE RESPONSIBLE FOR INSTALLATION,
DISMANTLING OR REINSTALLATION COSTS OR CHARGES. No Action, regardless of
form, may be brought against Seller more than 12 months after a cause of action has
accrued. The goods returned under warranty to Seller's factory shall be at Buyer's risk of
loss, and will be returned, if at all, at Seller's risk of loss.
iv AeroTrak®+ Remote Particle Counter Operation Manual
Buyer and all users are deemed to have accepted this LIMITATION OF WARRANTY AND
LIABILITY, which contains the complete and exclusive limited warranty of Seller. This
LIMITATION OF WARRANTY AND LIABILITY may not be amended, modified or its terms
waived, except by writing signed by an Officer of Seller.
Service Policy
Knowing that inoperative or defective instruments are as detrimental to TSI as they are to
our customers, our service policy is designed to give prompt attention to any problems. If
any malfunction is discovered, please contact your nearest sales office or representative, or
call TSI’s Customer Service department at 1-800-680-1220 (USA) or +001 (651) 490-2860
(International).
Trademarks
TSI, the TSI logo, and AeroTrak are registered trademarks of TSI Incorporated. Teflon is a
registered trademark of DuPont. Modbus is a registered trademark of Modicon,
Incorporated. Windows and Internet Explorer are registered trademarks of Microsoft
Corporation. Wi-Fi is a registered trademark of the Wi-Fi Alliance.
v
Contents
Manual History ......................................................................................... ii
Warranty .................................................................................................. iii
Contents ................................................................................................... v
Safety ...................................................................................................... vii
Laser Safety............................................................................................. vii
Labels ..................................................................................................... viii
Description of Caution/Warning Symbols ........................................... viii
Caution ............................................................................................. viii
Warning .............................................................................................. ix
Caution or Warning Symbols ................................................................ ix
Reusing and Recycling ......................................................................... ix
Getting Help .............................................................................................. ix
CHAPTER 1 Introduction and Unpacking ......................................... 1-1
Unpacking the AeroTrak+ Remote Particle Counter ............................. 1-3
Optional Accessories ......................................................................... 1-4
All Models ....................................................................................... 1-4
2.83 L/min, 0.1 cfm Models (7201, 7301, 7501, 6201, 6301,
6501) ............................................................................................ 1-4
28.3 L/min, 1.0 cfm Models (7310, 7510) ....................................... 1-5
CHAPTER 2 Installation and Getting Started ................................... 2-1
Indicator LEDs ....................................................................................... 2-1
Electrical Connections ........................................................................... 2-2
Device Connections ........................................................................... 2-2
12-24 VDC / Relay Connector ........................................................ 2-2
Ethernet Connector ......................................................................... 2-3
USB-C Connector ........................................................................... 2-3
AeroTrak+ Wi-Fi Node Operation ................................................... 2-3
4-20 mA Analog Output / Wireless Connector ................................ 2-4
Tubing Connections ............................................................................... 2-4
Inlet ..................................................................................................... 2-4
Installation .............................................................................................. 2-5
Determine the Installation Location .................................................... 2-5
Mounting the Remote Particle Counter .............................................. 2-5
Supplying Power to the Remote Particle Counter .............................. 2-6
Using Power-Over-Ethernet (PoE+) ............................................... 2-6
Using DC Power ............................................................................. 2-6
Connecting the Remote Particle Counter to a Computer .................. 2-7
Modbus® TCP over Ethernet ........................................................... 2-7
Tubing Installation .............................................................................. 2-7
Connecting Vacuum Tubing (Models 7201, 7301, 7501,
7310, 7510 only) .......................................................................... 2-7
Connecting Sample Tubing ............................................................ 2-8
CHAPTER 3 Communications and Configurations .......................... 3-1
Setting the IP Address of the Particle Counter ...................................... 3-1
Viewing Device Information ................................................................... 3-2
Title Bar .............................................................................................. 3-2
Main Page—Counts Tab .................................................................... 3-3
vi AeroTrak®+ Remote Particle Counter Operation Manual
Main Page—Instrument Tab .............................................................. 3-4
Main Page—Communication Tab ...................................................... 3-5
Configuring the Particle Counter ........................................................... 3-6
Tech Page—Configuration (Config) Tab ............................................ 3-8
Tech Page—Alarm Tab ...................................................................... 3-9
Tech Page—Relay Tab .................................................................... 3-10
Tech Page—Analog Tab .................................................................. 3-11
Tech Page—Instrument (Instr) Tab ................................................. 3-12
Non-Pump Models ........................................................................ 3-13
Pump Models ................................................................................ 3-13
Tech Page—Data Tab ..................................................................... 3-14
Tech Page—Password (Passwd) Tab ............................................. 3-15
Tech Page—Reset Tab .................................................................... 3-15
Loading or Saving a Configuration ................................................... 3-16
Particle Counter Report Page .............................................................. 3-16
Saving a Configuration Report ......................................................... 3-17
About Page .......................................................................................... 3-18
CHAPTER 4 Troubleshooting ............................................................. 4-1
CHAPTER 5 Contacting Customer Service ...................................... 5-1
Technical Contacts ................................................................................ 5-1
International Contacts ........................................................................ 5-1
Service ............................................................................................ 5-1
Technical Support ........................................................................... 5-2
Returning for Service ............................................................................. 5-2
APPENDIX A Specifications ............................................................... A-1
Specific Model Specifications ................................................................ A-2
Compliance ............................................................................................ A-3
Dimensional Diagram Models 7201, 7301, 7501, 7310, 7510 ............. A-3
Dimensional Diagram Models 6201, 6301, 6501 ................................. A-4
Index
vii
Safety
This section gives instructions to promote safe and proper handling of
the AeroTrak
®
+ Remote Particle Counter.
I M P O R T A N T
There are no user-serviceable parts inside the instrument. Refer all
repair and maintenance to a qualified factory-authorized technician. All
maintenance and repair information in this manual is included for use by
a qualified factory-authorized technician.
Laser Sa f e t y
The TSI AeroTrak®+ Remote Particle Counter (particle counter) are
Class I laser-based instruments. During normal operation, you
WILL NOT be exposed to laser radiation.
The following precautions should be taken to avoid exposure to
hazardous radiation in the form of intense, focused, visible light.
Exposure to this light may cause blindness.
• DO NOT remove any parts from the particle counter unless you are
specifically told to do so in this manual.
• DO NOT remove the housing or covers. There are no user-
serviceable components inside the housing.
W A R N I N G
There are no user-serviceable parts inside this instrument. The
instrument should only be opened by TSI or a TSI approved
service technician.
W A R N I N G
If the Particle Counter is used in a manner not specified by the
manufacturer, the protection provided by the equipment may
be impaired.
W A R N I N G
The use of controls, adjustments, or procedures other than those
specified in this manual may result in exposure to hazardous
optical radiation.
When operated according to the manufacturer’s instruction, this device is
a Class I laser product as defined by U.S. Department of Health and
Human Services standards under the Radiation Control for Health and
Safety Act of 1968. A certification and identification label like the one
shown below is affixed to each instrument.
viii AeroTrak®+ Remote Particle Counter Operation Manual
Labels
Advisory labels and identification labels are attached to the outside of the
particle counter housing and to the optics housing on the inside of the
instrument.
1. Serial number label
(left-side panel)
2. Calibration label
(right-side panel)
3. Laser radiation label (internal)
4. Laser radiation symbol label
(internal)
5. European symbol for nondisposable item. Item must
be recycled.
Description of Caution/Warning Symbols
Appropriate caution/warning statements are used throughout this manual
and on the instrument. They require you to take cautionary measures
when working with the instrument.
Caution
C A U T I O N
Caution means be careful. Not following the procedures prescribed in
this manual may result in irreparable equipment damage. Caution also
indicates important information about the operation and maintenance of
this instrument is included.
DANGER!
VISIBLE LASER RADIATION WHEN
OPEN. AVOID DIRECT
EXPOSURE TO BEAM
WARNING: NO USER SERVICABLE
PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL
Safety ix
Warning
W A R N I N G
Warning means unsafe use of the instrument could result in serious
injury or cause irrevocable damage to the instrument. Follow the
procedures prescribed in this manual to use the instrument safely.
Caution or Warning Symbols
The following symbols may accompany cautions and warnings to
indicate the nature and consequences of hazards:
Warns that uninsulated voltage within the instrument may
have sufficient magnitude to cause electric shock.
Therefore, it is dangerous to come into contact with any
part inside the instrument.
Warns that the instrument contains a laser and that
important information about its safe operation and
maintenance is included in the manual.
Warns that the instrument is susceptible to electro-static
dissipation (ESD) and ESD protection procedures should
be followed to avoid damage.
Indicates the connector is connected to earth ground and
cabinet ground.
Reusing and Recycling
As part of TSI Incorporated’s effort to have a minimal
negative impact on the communities in which its products
are manufactured and used:
• DO NOT dispose of used batteries in the trash.
• Follow local environmental requirements for battery
recycling.
• If instrument becomes obsolete, return to TSI for
disassembly and recycling.
Getting H e l p
To obtain assistance with this product or to submit suggestions, please
contact Customer Service:
TSI Incorporated
500 Cardigan Road
Shoreview, MN 55126 U.S.A.
Fax: (651) 490-3824 (USA)
Fax: 001 651 490 3824 (International)
Telephone: 1-800-680-1220 (USA) or (651) 490-2860
International: 001 651 490-2860
E-mail Address: technical.services@tsi.com
Web site: www.tsi.com
x AeroTrak®+ Remote Particle Counter Operation Manual
(This page intentionally left blank)
1–1
C H A P T E R 1
Introduction and
Unpacking
The AeroTrak®+ Remote Particle Counter (particle counter) is a compact
sensor that is appropriate for use in multiple locations in a large clean
room or critical environment to continuously monitor a process. The
sensors are very simple compared to a typical particle counter. They
have no display (other than several LED indicators) and can run with no
pump (central vacuum is used along with an integrated critical orifice) or
with an internal pump that is controlled to provide a constant volumetric
flow rate for 0.1 cfm (2.83 L/min) models.
Sensor data and particle counter information is communicated to an
external device via integrated Ethernet (TCP/IP), serial Modbus RTU
communications, a digital contact. 4-20 mA or wireless outputs are
available on select models. Oftentimes, this data is sent to a data logging
and reporting software, like TSI Incorporated’s Facility Monitoring
System Software.
The following table shows the remote particle counter models covered by
this manual.
* A denote 4-20 mA analog outputs
+
V denotes VHP resistant
* W denotes unit is capable of receiving the external wireless node
Part Number
Flow Rate
Size Channels (um)
No. Size
Channels
7201-22003
2.8 L/min (0.1 cfm)
0.2/0.3 um
2
7201-22003W*
2.8 L/min (0.1 cfm)
0.2/0.3 um
2
7201-24010
2.8 L/min (0.1 cfm)
0.2/0.3/0.5/1.0 um
4
7201-24010A*
2.8 L/min (0.1 cfm)
0.2/0.3/0.5/1.0 um
4
7201-24010W*
2.8 L/min (0.1 cfm)
0.2/0.3/0.5/1.0 um
4
7301-22005
2.8 L/min (0.1 cfm)
0.3/0.5 um
2
7301-22005W*
2.8 L/min (0.1 cfm)
0.3/0.5 um
2
7301-24050
2.8 L/min (0.1 cfm)
0.3/0.5/1.0/5.0 um
4
7301-24050A*
2.8 L/min (0.1 cfm)
0.3/0.5/1.0/5.0 um
4
7301-24050W*
2.8 L/min (0.1 cfm)
0.3/0.5/1.0/5.0 um
4
7301-24100
2.8 L/min (0.1 cfm)
0.3/0.5/5.0/10 um
4
7301-24100A*
2.8 L/min (0.1 cfm)
0.3/0.5/5.0/10 um
4
7301-24100W*
2.8 L/min (0.1 cfm)
0.3/0.5/5.0/10 um
4
7301-26250
2.8 L/min (0.1 cfm)
0.3/0.5/1.0/5.0/10/25 um
6
7301-26250A*
2.8 L/min (0.1 cfm)
0.3/0.5/1.0/5.0/10/25 um
6
7301-26250W*
2.8 L/min (0.1 cfm)
0.3/0.5/1.0/5.0/10/25 um
6
1–2 AeroTrak®+ Remote Particle Counter Operation Manual
Part Number
Flow Rate
Size Channels (um)
No. Size
Channels
7501-22050
2.8 L/min (0.1 cfm)
0.5/5.0 um
2
7501-22050W*
2.8 L/min (0.1 cfm)
0.5/5.0 um
2
7501-24100
2.8 L/min (0.1 cfm)
0.5/1.0/5.0/10 um
4
7501-24100A*
2.8 L/min (0.1 cfm)
0.5/1.0/5.0/10 um
4
7501-24100W*
2.8 L/min (0.1 cfm)
0.5/1.0/5.0/10 um
4
7501-25250
2.8 L/min (0.1 cfm)
0.5/1.0/5.0/10/25 um
5
7501-25250A*
2.8 L/min (0.1 cfm)
0.5/1.0/5.0/10/25 um
5
7501-25250W*
2.8 L/min (0.1 cfm)
0.5/1.0/5.0/10/25 um
5
7501-24250
2.8 L/min (0.1 cfm)
0.5/5.0/10/25 um
4
7501-24250A*
2.8 L/min (0.1 cfm)
0.5/5.0/10/25 um
4
7501-24250W*
2.8 L/min (0.1 cfm)
0.5/5.0/10/25 um
4
7310-22005
28.3 L/min (1 cfm)
0.3/0.5 um
2
7310-22005W*
28.3 L/min (1 cfm)
0.3/0.5 um
2
7310-24050
28.3 L/min (1 cfm)
0.3/0.5/1.0/5.0 um
4
7310-24050A*
28.3 L/min (1 cfm)
0.3/0.5/1.0/5.0 um
4
7310-24050W*
28.3 L/min (1 cfm)
0.3/0.5/1.0/5.0 um
4
7310-24100
28.3 L/min (1 cfm)
0.3/0.5/5.0/10 um
4
7310-24100A*
28.3 L/min (1 cfm)
0.3/0.5/5.0/10 um
4
7310-24100W*
28.3 L/min (1 cfm)
0.3/0.5/5.0/10 um
4
7510-22050
28.3 L/min (1 cfm)
0.5/5.0 um
2
7510-22050V+
28.3 L/min (1 cfm)
0.5/5.0 um
2
7510-22050W*
28.3 L/min (1 cfm)
0.5/5.0 um
2
7510-24100
28.3 L/min (1 cfm)
0.5/1.0/5.0/10 um
4
7510-24100A*
28.3 L/min (1 cfm)
0.5/1.0/5.0/10 um
4
7510-24100W*
28.3 L/min (1 cfm)
0.5/1.0/5.0/10 um
4
7510-24250
28.3 L/min (1 cfm)
0.5/5.0/10/25 um
4
7510-24250A*
28.3 L/min (1 cfm)
0.5/5.0/10/25 um
4
7510-24250W*
28.3 L/min (1 cfm)
0.5/5.0/10/25 um
4
6201-24010
2.8 L/min (0.1 cfm)
0.2/0.3/0.5/1.0 um
4
6201-24010A*
2.8 L/min (0.1 cfm)
0.2/0.3/0.5/1.0 um
4
6201-24010W*
2.8 L/min (0.1 cfm)
0.2/0.3/0.5/1.0 um
4
6301-24100
2.8 L/min (0.1 cfm)
0.3/0.5/5.0/10 um
4
6301-24100A*
2.8 L/min (0.1 cfm)
0.3/0.5/5.0/10 um
4
6301-24100W*
2.8 L/min (0.1 cfm)
0.3/0.5/5.0/10 um
4
6301-26250
2.8 L/min (0.1 cfm)
0.3/0.5/1.0/5.0/10/25 um
6
6301-26250A*
2.8 L/min (0.1 cfm)
0.3/0.5/1.0/5.0/10/25 um
6
6301-26250W*
2.8 L/min (0.1 cfm)
0.3/0.5/1.0/5.0/10/25 um
6
6501-24100
2.8 L/min (0.1 cfm)
0.5/1.0/5.0/10 um
4
6501-24100A*
2.8 L/min (0.1 cfm)
0.5/1.0/5.0/10 um
4
6501-24100W*
2.8 L/min (0.1 cfm)
0.5/1.0/5.0/10 um
4
Introduction and Unpacking 1–3
Part Number
Flow Rate
Size Channels (um)
No. Size
Channels
6501-24250
2.8 L/min (0.1 cfm)
0.5/5.0/10/25 um
4
6501-24250A*
2.8 L/min (0.1 cfm)
0.5/5.0/10/25 um
4
6501-24250W*
2.8 L/min (0.1 cfm)
0.5/5.0/10/25 um
4
6501-25250
2.8 L/min (0.1 cfm)
0.5/1.0/5.0/10/25 um
5
6501-25250A*
2.8 L/min (0.1 cfm)
0.5/1.0/5.0/10/25 um
5
6501-25250W*
2.8 L/min (0.1 cfm)
0.5/1.0/5.0/10/25 um
5
Unpacki n g t h e AeroTrak+ R e m o t e Parti c l e C o u nter
Carefully unpack the AeroTrak+ Remote Particle Counter from the
shipping container and check the contents of the shipment against the
tables below. If any parts are missing or broken, notify TSI immediately.
Keep the shipping container for returning the device for service.
Qty.
Item Description
Part/Model
Reference Picture
1
AeroTrak+ Remote
Particle Counter
7201
7301
7501
7310
7510
6201
6301
6501
1
Operation Manual
(6012577) and
Configuration Utility
on USB drive
7003732
1
Calibration Certificate
N/A
1
12-24 VDC / Relay
Connector
6003398
1–4 AeroTrak®+ Remote Particle Counter Operation Manual
Optional Accessories
The following tables list optional accessories. If you ordered optional
accessories, make certain they have been received and are in
working order.
All Models
Item Description
Part/Model
Reference Picture
Power Supply*
PSU-ARWP
USB-C Cable
700360
AeroTrak+ Wi-Fi® Node
700500
*Manufacturer’s Declaration for Korea: This product is intended to be powered by
PoE+ or user-supplied 12–24V supply. PSU-ARWP power supply accessory not
for use in the Korean market.
2.83 L/min, 0.1 cfm Models (7201, 7301, 7501, 6201, 6301, 6501)
Item Description
Part/Model
Reference Picture
0.1 CFM Zero Filter
AR-PF-001
Mounting Bracket
700008
Isokinetic Inlet (2.8 L/min,
0.1 cfm)
Stainless Steel
ISPDM-00145
Isokinetic Barb Sampling
Probe Al 0.1 cfm
700477
Isokinetic Barb Sampling
Probe SS 0.1 cfm
700478
®
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Introduction and Unpacking 1–5
Item Description
Part/Model
Reference Picture
Adapter, Isokinetic Zero
Cap, 0.1 cfm
700481
Sample Tubing
Superthane Tubing – 1/8 ID
1/4 OD 100 FT
Superthane Tubing – 1/8 ID
1/4 OD 1000 FT
700009
700010
28.3 L/min, 1.0 cfm Models (7310, 7510)
Item Description
Part/Model
Ref.
1 CFM Zero Filter
AR-PF-010
Mounting Bracket
700008-1
Stainless Steel
Isokinetic inlet (28.3 L/min,
1.0 cfm)
ISPDM-01045
Isokinetic Barb Sampling
Probe Al 1.0 cfm
700479
Isokinetic Barb Sampling
Probe SS 1.0 cfm
700480
Isokinetic Cap
700252
Loading...