AeroScout EX3300 User Manual
EX3300 SERIES EXCITERS
INSTALLATION & CONFIGURATION GUIDE
Disclaimer
The information and know-how included in this document are the exclusive property of STANLEY Healthcare
and are intended for the use of the addressee or the user alone. The addressees shall not forward to another
their right of using the information, know-how or document forwarded herewith, in whole or in part in all
matters relating or stemming from or involved therein, whether for consideration or without consideration,
and shall not permit any third party to utilize the information, know-how or the documents forwarded
herewith or copies or duplicates thereof, unless at the company’s consent in advance and in writing. Any
distribution, advertisement, copying or duplication in any form whatsoever is absolutely prohibited. The
Company reserves the right to sue the addressee, user and/or any one on their behalves, as well as third
parties, in respect to breaching its rights pertaining to the intellectual rights in particular and its rights of
whatever kind or type in the information, know-how or the documents forwarded by them herewith in
general, whether by act or by omission.
This document is confidential and proprietary to STANLEY Healthcare and is not to be distributed to any
persons other than licensed AeroScout Visibility System users or other persons appointed in writing by
STANLEY Healthcare.
Trademark Acknowledgements
AeroScout is a trademark of Stanley Black & Decker, Inc. or its affiliates. Other brand products and service
names are trademarks or registered trademarks of their respective holders. Below is a partial listing of other
trademarks or registered trademarks referenced herein:
Cisco™ is a trademark of Cisco Systems, Inc.
Sun, Sun Microsystems, the Sun Logo, Java, JRE and all other Sun trademarks, logos, product names, service
names, program names and slogans that are referred to or displayed in this document are trademarks or
registered trademarks of Sun Microsystems, Inc. in the United States and other countries.
This product includes software developed by the Apache Software Foundation (http://www.apache.org/).
This product includes code licensed from RSA Data Security
Skype, SkypeIn, SkypeOut, Skype Me, the Skype Logo and the S logo and other marks indicated on Skype’s
website are trademarks of Skype Limited or other related companies.
ESper is a trademark of EsperTech, Inc.
Jboss is a trademark of Red Hat Middleware, LLC.
Oracle 10G is a registered trademark of Oracle Corporation and/or its affiliates.
MS SQL Server 2005 is a registered trademark of Microsoft Corporation in the United States and/or other
countries.
JasperSoft, the JasperSoft Logo, JasperReports, the JasperReports logo, JasperIntelligence, JasperDecisions,
JasperAnalysis, Scope Center, Scope Designer, and JasperServer are trademarks or registered trademarks of
JasperSoft, Inc. in the United States and other countries.
2015 STANLEY Healthcare. All rights reserved.
Doc: 0981-184-000 Rev A Published: 2015/04/02 KB Article: 5587
EX3300 Series Exciter Installation & Configuration Guide
Table of Contents
Introduction ......................................................................................................... 4
EX3300 Features ................................................................................................... 5
Supported Dispenser Models ............................................................................... 6
Installing the Exciters ........................................................................................... 7
Adding the Exciters to the Engine Manager ..................................................... 18
Advanced Configuration .................................................................................... 20
Replacing a Malfunctioning Exciter ................................................................... 21
EX3300 Series Exciter Models and Cables Summary.......................................... 22
EX3300 Specifications ......................................................................................... 23
EX3300 Series Exciter Installation & Configuration Guide
Introduction
The EX3300 Series Embedded Exciters are key components of STANLEY
Healthcare’s Hand Hygiene Compliance Monitoring Solution. Together with
STANLEY Healthcare’s suite of enterprise visibility solutions, the EX3300 Exciters
provide robust and sophisticated RFID detection and monitoring capabilities.
The EX3300 Exciters are designed specifically to be embedded in touch free or
automated Hand Hygiene dispensers. When a dispenser with an embedded
EX3300 Exciter is activated, the Exciter triggers a tag located in range of the
Exciter and the tag in turn transmits a message to a location receiver or
compatible access point in range. This provides instant acknowledgment that a
tagged staff member has used the dispenser. The Hand Hygiene Compliance
Monitoring Solution detects, records, and reports dispenser usage by staff
member, providing a revolutionary way for healthcare facilities to monitor staff
compliance with the hand hygiene policy.
Figure 1: EX3300 embedded in a dispenser triggering a staff tag
Introduction 4
EX3300 Series Exciter Installation & Configuration Guide
EX3300 Features
Hand Hygiene D ispenser Inte gr ation
EX3300 Exciters are designed to be embedded in specific touch free or
automated GoJo or Ecolab dispensers. The embedded Exciter reacts to dispenser
activation and triggers the tag, in range, to transmit a message.
Configurable Transmissi on Range
EX3300s have a range of up to2 meters (6.5 ft.) which can be configured using
the Exciter Manager Tool.
Exciter Type Identificatio n
EX3300 Exciters are configured with a predefined message identifying them as
Hand Hygiene devices. The triggered tag transmits the message over the
network. MobileView identifies the message as a Hand Wash event.
EX3300 Features 5
EX3300 Series Exciter Installation & Configuration Guide
Supported Dispenser Models
The EX3300 Exciters are designed for integration in the following GoJo and
EcoLab dispensers.
Description Image
GOJO TFX Touch Free Dispensers
Includes the following TFX dispenser brands:
• PURELL TFX Touch Free Dispenser
• PURELL Surgical Scrub TFX Touch Free Dispenser
• PROVON TFX Touch Free Dispenser
GOJO LTX Touch Free Dispensers
GOJO TFX Provon with CHG Dispensers
EcoLab Next Gen Touch-Free Dispenser
EcoLab NEXA Touch-Free Dispensers
Supported Dispenser Models 6
EX3300 Series Exciter Installation & Configuration Guide
Installing the Exciters
This chapter describes how to install the EX3300 Exciters in the different
dispenser models. Each dispenser model is compatible with a specific EX3300
Exciter model.
The EX-3300 Exciter must only be installed in the EcoLab Hand Sanitizer
Note
Installing the EX3300 Exciter in an EcoLab Next Gen Dispenser
To open the dispenser:
Press the large button situated on the bottom of the dispenser. This 1.
Note
Dispenser or the GoJo Hand Sanitizer Dispensers.
releases the (bottom) hinged dispenser outer casing from the back panel,
allowing it to open forwards.
Approach the dispenser from the side, being careful not to activate the
dispensing mechanism.
To Install the EX3300 Exciter:
Remove the tape from the double sided Velcro on the back of the Exciter 1.
casing.
Align the positioning nodes on the Exciter casing with the holes on the 2.
dispenser's front panel and fix the Exciter in place.
Installing the Exciters 7
EX3300 Series Exciter Installation & Configuration Guide
To attach the Exciter Connector Cable:
Connect the black connector of the connector cable into the Exciter. 3.
Remove the entire internal dispenser mounting assembly from the 4.
dispenser casing by depressing the holding clip on the top of the assembly.
Route the cable over the top of the assembly ensuring the cable is not 5.
snagged or twisted.
Apply the connector wire retaining tape to the top of the mounting 6.
assembly.
Installing the Exciters 8
Loading...