Aero Mist 67014 User Manual

AEROJVUST

Model #67014

14^^ Dual Head Air Cireulator

OWNER’S MANL AL

[ndoor/Outdoor Fan

READ & SAVE THESE [NSTRUCTIONS

Safety Rules______________________________________________________________________________ 1
Unpacking Your Fan._______________________________________________________________________ 2
Installing Your Fan
Troubleshooting___________________________________________________________________________ 8
Specification

________________________________________________________________________

_____________________________________________________________________________

3

9

Table of Contents

READ AND SAVE THESE INSTRUCTIONS

To reduce the risk of electric shock, insure electricity has
been turned off at the circuit breaker or fuse box before
beginning.

2.

All wiling must be in accordarrce with the National
Electrical Code C ANSI / NFPA 70-1999 ) and local
electrical codes. Electrical installation should be
performed by a qualified licensed electrician.

3.

WARNING: To reduce the risk of electrical shock and
fire, do not use this fan with any solid-state fan speed
control device.

4.

CAUTION: To reduce the risk of personal injury, use only
the screws provided with the outlet box.

5,

The outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum of
35 pounds. Use only UL Listed outlet boxes marked “FOR
FAN SUPPORT.”

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK

OR PERSONAL INJURY, MOUNT FAN TO OUTLET BOX
HARKED acceptable FOR FAN SUPPORT WITH THE

SCREWS PROVIDED WITH THE OUTLET BOX.

WARNING

6. The fan must be mounted with a minimum of 7 feet

clearance from the trailing edge of the blades to the floor.

7. Avoid placing objects in the path of the blades.

8. To avoid personal injury or damage to the fan and other
items, be cautious when working around or cleaning the
fan.

9. Do not use water or detergents when cleaning the fan or
fan blades. A dry dust cloth or lightly dampened cloth
will be suitable for most cleaning.

10. After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into
outlet box. The wires should be spread apart with the
grounded conductor and the equipment-grounding
conductor on one side of the outlet box,

11. Electrical diagrams are for reference only. Light kits
that are not packed with the fan must be UL Listed and
marked suitable for use with the model fan you are
installing. Switches must be UL General Use Switches,
Refer to the instructions packaged with the light kits and
switches for proper assembly. Use 2 x i-i W CFL

bulbs max.

12. Thi.s fan is suitable for outdoor use. Lise only on GFCT
protected receptacles as a oiitdmr fan.

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND

THE BLADE BRACKETS (ALSO REFERRED TO AS ‘‘FLANGES’’)

DURING ASSEMBLY OR AFTER INSTALLATION. DO NOT

INSERT OBJECTS IN THE PATH OF THE BLADES.

WARNING

1. Safety Rules

Unpack your fan and check the contents. You should ha\ e the follow ing items:

1. Fan Motor Assembly <>■ Bulb ( 2 )

2. Canopy

3. Coupling Cover

4. Standard Downrod Assembly

5. Light kit

Unpacking Your Fan 2.

a) Mounting hardware
(1 bolt. 1 clex'is pin)
b) Electrical hardware
(3 plastic wire connectors. 2 pull chain for
the fan. 1 pull chain for the light kit).