Aerohive Networks AP230 User Manual

Aerohive Devices QuickStart
Install Aerohive devices (APs, switches, and routers) on your network.
1
Power
Connect the Aerohive device to a power source: a 100-240 AC power outlet, or, for APs, PSE (power sourcing equipment).
Aerohive
device
2
Network
Aerohive AP or switch: Connect an Ethernet cable from Eth0 on an AP and from
any port on a switch to an upstream network device - switch, router, firewall...
Aerohive router: Connect an Ethernet cable from WAN/Eth0 to a DSL router, cable
modem, or other Internet device.
Aerohive AP
or switch
Aerohive devices act as DHCP clients by default. For deployment on networks without DHCP, see product documentation at www.aerohive.com/techdocs.
Aerohive
router
Local
network
Local
network
For more information about your
device, scan the QR code or visit
www.aerohive.com/quick
For Aerohive APs, attach external antennas, if necessary.
Internet
Firewall
Internet
DSL router, cable modem, or other Internet device.
3
Management
After connecting to the network, the Aerohive device contacts HiveManager Online or a HiveManager physical appliance or HiveManager Virtual Appliance on premises. The device is now ready to be managed.
Aerohive
device
Host name: AH-123456
HiveManager
Online
To register, get the latest product documentation (including a limited number of translations), see compliance information and download software updates, visit www.aerohive.com/support.
©
2014 Aerohive Networks Inc. Aerohive Networks Inc. and the Aerohive logo are U.S. registered trademarks of Aerohive Networks Inc.
P/N 330111-01 Rev. A
AH-123456!
OR
HiveManager
physical appliance
on premises
HiveManager
OR
Virtual Appliance
After the device connects to HiveManager, the status LED glows white.
Loading...