AeroBed Premier IntelliWarmth Cover User Manual [en, es, fr]

8052 Rev. 7/05 Pump 111

_______________________________________________ _______________________________________________ _______________________________________________ _______________________________________________

PLACE STAMP

HERE

AeroBed®Premier IntelliWarmth

Instruction Manual

Manual de Instrucciones

Mode d'emploi

English 1

Español 9

Français 17

WARRANTY DEPARTMENT AERO PRODUCTS INTERNATIONAL, INC. 1225 KARL COURT WAUCONDA IL 60084-1098

Made in China.

Thank you for joining the Aero®family by purchasing one of our upscale products.

ADJUST

INFINF

DEFDEF

ADJUST

INF

DEF

ADJUST

INFINF

DEFDEF

ADJUST

INF

DEF

You can expect topnotch quality, innovation and imagination from every Aero product.

English

You are about to enjoy the luxuriously comfortable

Aero®Bed IntelliWarmth

comprising advanced, patented, FiberThermics®technology with SMART microchip control from

ThermoSoft®. Your AeroBed IntelliWarmth is made with soft, flexible

fiber heating elements that will provide many years of safe, comfortable use when cared for properly. Please read these instructions carefully before using.

IMPORTANT: Preparation of your bed requires no tools. Use of tools may damage your bed.

Read, follow and retain this instruction manual for future reference.

— Keep the control away from an open window.

— Do not use pins. They may damage the electrical wiring.

— Be sure that this mattress pad is used on an alternating-current (AC) supply

English

circuit of the proper Voltage.

— Turn the controller switch to the “0” position when the mattress pad is not in actual

use.

— Excessive heating and irreparable damage may result from folding this mattress

pad when in actual use.

— Do not dry clean this mattress pad. Cleaning solvents may have a deteriorating

effect on the insulation of the heating element.

— Unplug product(s) when not in use.

IMPORTANT SAFETY INFORMATION

AND WARNINGS

— WARNING: Adult supervision required for inflation, deflation and maintenance.

Follow all safety instructions to avoid serious injury.

—

WARNING: This is an electrical product - not a toy.To avoid risk of fire, burns,

injury, and shock, it should not be played with or placed where small children can reach it. Do not use in or around water.

— This is not a water toy. Use as a mattress only.

— This mattress is not intended for infants or persons with limited mobility. They may

roll off of the mattress and become entrapped between the mattress and a wall.

— Remove all sharp objects from area where bed will be set up and used. Bed may

puncture.

— Product is intended for household use only. Do not step or jump on bed or use as

a trampoline.

— Place bed in a safe area before use, making sure that there are no sharp edges,

steps, drops, or breakable items nearby. Use on flat surfaces only. Bed may tip over on uneven surfaces.

— Do not use this bed on abrasive surfaces or near pointed/sharp items or surfaces.

Protruding objects may puncture the bed.

— This bed is made of plastic and therefore may melt or burn if it comes in contact

with any flame or heat source. Do not place it near or against heaters, open flame or other hot objects.

Do not use this mattress pad with an inf

—

ant, a helpless person, or an

insensitive to heat such as a person with poor blood circulation.

Do not tuc

—

k in the wired area of this mattress pad.

— Do not route electrical cords under the mattress or between mattress and box

spring. Do not allow the cords to be pinched.

1 2

yone

— Do not attempt to dissemble, repair, or service the pump. No serviceable parts are

contained inside. Contact Aero Products International, Inc. at 1225 Karl Court, Wauconda, IL 60084, for repair or servicing information.

INFLATION AND MATTRESS PAD INSTRUCTIONS

1. Remove your AeroBed®and Intelliwarmth Mattress Pad from its lightweight duffle bag. Keep bag for storage.

inflating or it may cause air leaks.

2. Remove AC plug, cord and comfort control wand from plastic bag and shrink wrap. Because this is an electrical device, do not use this in or around water.

3. Plug pump into any standard polarized 110 Volt AC electrical outlet. North American Electrical rating: 120VAC (NOTE: 230VAC product sold outside of North America)

4. This product has a polarized attachment plug (one blade is wider than the other) as a safety feature. This plug will fit into a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not attempt to defeat this safety feature.

5. Push and hold inflation button on the control wand for approximately 60 seconds to inflate your AeroBed to the full (firmest) capacity. Bed will not over-inflate.

Lie on the bed and use control wand to adjust the firmness to

6. your desired level. For firmer bed, press the inflate button. For softer bed, press the adjust button.

NOTE: Bed must be at room temperature prior to

7. Lay your IntelliWarmth mattress pad flat over the bed with the mattress pad

ADJUSTADJUST

INFINF

DEF

ADJUST

INF

A T

DEF

connector positioned at the head of the bed and the label facing up.Tuck the skirt of the warming mattress pad under all four sides of your mattress for a snug fit.

English

CAUTION: Only the skirt should be tucked under. The heated portion of the

mattress pad must lie flat on the top of the bed.

should not be folded during use

. Make your bed as you usually do, but NEVER

Your IntelliWarmth mattress pad

add another warming mattress pad or warming blanket.

8. Grip the (3-pin) connector coming from the mattress pad and insert the (3-hole) plug coming from the controller.

Make sure these

connections are snug.

9. Route the controller cord to an electrical outlet and Do not route cord under mattress or between mattress and box spring.

10. Make sure the controller switch is in the “0” position before plugging it into the wall

outlet.

11 Plug the controller cord into a 110-120V outlet. IMPORTANT: this mattress pad

has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

12. Turn the controller switch to any numerical setting to turn it ON.

The numerical indicator light should come on.

13. Turn the dial to your desired heat setting. You may need to

re-adjust your settings if the ambient temperature in the room changes: higher settings for colder rooms. The mattress pad automatically boosts power for fast warm-up in the first one-half hour. After 1 hour, settings 5 & 6 automatically reduce to setting 4 for an all night comfortable sleep setting.

14. Your

IntelliWarmth mattress pad will turn off automatically after 10 hours or after

a power outage. The numerical indicator light will flash when the mattress pad has been turned off automatically. This is a reminder to turn off the mattress pad by turning the numerical indicator to “0” and then turning it back to a numerical setting to turn it on. You will hear a click when the dial is turned to “0” and when it is turned back to a number above 0.

DEFLATION AND STORAGE

1. To disconnect Intelliwarmth Mattress Pad, switch the controller to “0”, unplug the controller from the wall outlet, then disconnect the controller from the mattress pad.

2. To deflate the AeroBed, press the deflate button on the control wand. Deflation takes approximately 60 seconds.

3. Roll or fold the AC cord with wand controller and secure it. Fold sides of bed into the center along its length. Tightly roll your AeroBed around the pump. When the bed is completely rolled, place it into the lightweight duffle bag for storage.

4. Store your AeroBed in a clean dry place at room temperature (above 50°F/10° C). Storing your AeroBed under 50° F (10° C) and over 100° F (38° C) may affect its performance and will not be covered under warranty.

NOTE: Bed must be at room temperature prior to inflating or it may cause air leaks.

CARE AND MAINTENANCE

1. Inspect your AeroBed prior to each use.

2. Keep your AeroBed away from any sharp objects. Large cuts or snags may not be repairable and will not be covered by your warranty.

3. When not in use, store your AeroBed in a clean, dry place out of extreme temperatures. Product must be at room temperature prior to inflating.

4. Do not store your AeroBed folded inside sofa beds or roll-aways.This may cause damage to your bed that will not be covered under your warranty.

5. In case of incidental damage to your bed, a repair kit has been included. Please follow repair instructions carefully.

6. Intelliwarmth Mattress Pad Controller care:

English

To restart your mattress pad, always turn your mattress pad controller to “0”, make sure the mattress pad is laying flat on the bed, and wait at least 10 seconds. Then, switch the controller to a number above “0” and adjust the temperature dial to your desired setting. If mattress pad fails to restart – see section titled “Troubleshooting Instructions”.

IMPORTANT REMINDERS:

1. Before plugging in your mattress pad, make sure the controller is set to the “0” position.

2. Always plug the controller into the mattress pad first, then, plug the controller into the w

all outlet.

• Keep controller dry - do not spill beverages and liquids on the controller.

• Do not locate controller where exposed to rain, direct sunlight, space heaters or other heat sources. The controller may be damaged by excessive heat.

• Note: the controller may feel slightly warm – this is normal.

CLEANING

ADJUSTADJUST

INFINF

AATT

DEFDEF

ADJUST

INF

DEF

Do not dry clean Do not iron Do not bleachTu mble dryWash Do not twist

40°

AeroBeds

We recommend that you do not let the plush surface of your AeroBed®get wet.

English

Repeated exposure to water or other liquids may cause damage to the plush surface that will not be covered by your warranty. Should liquid come in contact with the plush surface, blot liquid dry and use a damp cloth to remove any stain. Let surface air dry completely.

You may clean the PVC on the sides and bottom of your AeroBed with a mild dishwashing detergent or household cleaner. Do not use strong chemicals or other compounds. Allow your bed to air dry completely after cleaning and before storing.

Intelliwarmth Mattress Pad

Turn controller switch to “0”, unplug cord from the wall outlet, and then unplug cord from the mattress pad before washing the mattress pad.

MACHINE WASHING INSTRUCTIONS

• Use a small amount of mild laundry soap.

• Fill tub with warm water to wash, cold water for rinse.

• Wash mattress pad on gently cycle, and spin dry.

HAND WASHING INSTRUCTIONS

• Use a small amount of mild laundry soap in warm water.

• Let mattress pad soak for 5 minutes.

• Gently move the mattress pad up and down for 5 minutes.

• Do not rub, scrub, twist or wring mattress pad.

• Rinse thoroughly in cool water by moving up and down.

DRYING INSTRUCTIONS

• Machine dry on LOW until dry– make sure the mattress pad tumbles freely.

• If line drying, do not use clothes pins which might pinch the heating elements. Suggestion: drape over two lines.

• Do not plug in mattress pad while damp or wet.

• Do not iron.

• Never use commercial dryers at the laundromat which may be too hot.

TO CLEAN CONTROLLER:

• Wipe gently with a dry, non-abrasive cloth.

• Do not wash or immerse in liquid.

TROUBLESHOOTING

Very rarely, your AeroBed®may fail to inflate properly. Should this occur, please use the following check list.

1. If you Aero Bed Doesn’t appear to be inflating:

First, make sure the bed is plugged into an active electrical outlet.

Push the control wand’s inflate button firmly.

2. If air leakage occurs:

Carefully inspect the bed for a puncture or tear. If damaged, repair using the kit included with your bed. Follow all instructions and warnings included in the kit.

3. If Intelliwarmth Mattress Pad fails for warm:

Make sure that the controller switch is set to “0”, unplug your mattress pad from the wall outlet and make sure the wall outlet is 110-120V and has power. Check the mattress pad connector and the controller plug to make certain the controller plug is inserted snugly into the mattress pad connector. Plug the controller into the wall outlet and make sure that the wall connection is snug.Turn the controller switch to any numerical setting above “0”. The numerical indicator light should come on.

4. If the mattress pad fails to warm up, or if improper operation of the mattress pad is observed, discontinue its use immediately and consult Customer Service. The mattress pad may have been permanently damaged and is now inoperable.

5. Permanent damage may be caused by:

• Folding or bunching of the mattress pad during use.

• Pinching, piercing or cutting of the heating elements

• Exposing the controller to moisture, excessive impact, or excessive heat.

6. If trouble persists, please phone our Customer Service center for assistance.

U.S. 1-888-462-4468 Monday through Friday, 9 AM to 5 PM Central Standard Time

Canada 1-888-702-8281

Or visit our website at : www.thinkaero.com

English

LIMITED EXPRESS WARRANTY

Aero Products International, Inc. ("us") warrants to the original purchaser ("you") that the AeroBed

English

workmanship for the following periods: the pump and valve, two (2) years from the date of purchase; the mattress one (1) year from the date of purchase; IntelliWarmth mattress pad and controller one (1) year from the date of purchase.

OUR EXCLUSIVE OBLIGATION, AND YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED EXPRESS WARRANTY OR OTHERWISE SHALL BE THE REPAIR OR REPLACEMENT OF ANY PRODUCT OR PARTS WHICH MAY PROVE DEFECTIVE UNDER THE CONDITIONS AND DURING THE PERIODS DESCRIBED ABOVE AT OUR SOLE COST AND EXPENSE. IN THE EVENT THE PRODUCTS OR PARTS CANNOT BE REPAIRED OR REPLACED, YOU SHALL RECEIVE A FULL REFUND OF THE PURCHASE PRICE AT OUR OPTION. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

("product") is guaranteed against defects in materials and

EXCLUSIONS

Our obligation under this limited express warranty shall not apply if our inspection shows:

A. That the product is used for other than normal indoor sleeping purposes.

B. Any product or part has been damaged by alteration.

C. Any product or part has been subject to accident, misuse, abuse or has been

operated contrary to our written instructions.

WARRANTY REDEMPTION

You must obtain an authorization from us before returning a defective product. Call us at 1-888-462-4468 or write us at Aero Products International, 1225 Karl Court, Wauconda, IL 60084-1098 for a return authorization. The product should be carefully packaged and delivered postage or delivery charges prepaid at the address set forth above. You are responsible for all damages incurred in shipping.

WARRANTY DISCLAIMER

EXCEPT FOR THE LIMITED EXPRESS WARRANTY SET FORTH IN THIS SECTION, OR ANY IMPLIED WARRANTIES PERMITTED UNDER APPLICABLE LAW, SELLER MAKES NO EXPRESS OR IMPLIED REPRESENTATIONS. ALL CLAIMS AGAINST US MUST BE BROUGHT WITHIN ONE (1) YEAR FROM THE TIME THEY ARISE.

TES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED

SOME ST WARRANTY LASTS, SO THE ABOVE DISCLAIMER MAY NOT APPLY TO YOU.

LIMITATION OF LIABILITY

TO THE FULLEST EXTENT PERMITTED BY LAW, SELLER SHALL NOT BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WITH RESPECT TO THE SALE OR USE OF THE PRODUCTS, INCLUDING ANY LOST REVENUES, LOSS OF USE OR LOST PROFITS, REGARDLESS OF THE THEORY BY WHICH ANY CLAIM MAY BE BASED, INCLUDING ANY TORT, TANGIBLE PROPERTY DAMAGE OR STATUTORY CAUSES OF ACTION. NOTWITHSTANDING THE TERM OF ANY LIMITED OR IMPLIED WARRANTY, OR IN THE EVENT THAT ANY LIMITED WARRANTY FAILS OF ITS ESSENTIAL PURPOSE, IN NO EVENT WILL OUR ENTIRE LIABILITY TO YOU EXCEED THE PURCHASE PRICE ACTUALLY PAID BY YOU FOR THE PRODUCTS, OR ANY DEFECTIVE OR NONCONFORMING PORTION THEREOF, WHICHEVER IS THE LESSER AMOUNT.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

THIS LIMITATION DOES NOT APPLY TO ANY CLAIMS FOR PERSONAL INJURY. THIS AGREEMENT AND ANY CLAIMS AND DISPUTES BETWEEN THE PARTIES SHALL BE GOVERNED BY AND SUBJECT TO THE INTERNAL LAWS (EXCLUSIVE OF THE CONFLICTS OF LAW PROVISIONS) AND DECISIONS OF THE COURTS OF THE STATE OF ILLINOIS.THE EXCLUSIVE VENUE AND JURISDICTION FOR ALL CLAIMS AND DISPUTES SHALL BE THE STATE OR FEDERAL COURT LOCATED IN WAUCONDA, ILLINOIS.

Aero Products International, Inc. neither assumes nor authorizes any representative or other person to assume any obligation or liability other than those expressly set forth herein.

Made in China. This product is covered under one or more of the following U.S. and/or foreign patents: U.S. Pat. Nos. 4,977,633; 5,367,726; 6,237,621; 6,508,264; 6,755,208; AU 731613; BR PI9710873-1-1; CH 97196557.9; DE 69024962.4; DE 69230797.4; EPC 0 487 641; EPC 0 605 624; HK 1025374; JP 3419774; Singapore 61207; Taiwan 62301 and patents pending.

Patented warming technology provided by , US Patent No: 6,403,935; 6,563,094; 6,713,733.

ETL Listed.

Our Customer Service Department is available Monday - Friday, 9 AM to 5 PM Central Standard Time, to answer any questions you may have about your new

product.

Aero Please call us toll free at 1-888-462-4468. Canada: 1-888-702-8281.

U.S.A.

Aero Products International, Inc. 1225 Karl Court

auconda, IL 60084-1098 USA

English

www.thinkaero.com

PLEASE TURN TO BACK OF MANUAL FOR PRODUCT WARRANTY CARD.

7 8

+ 9 hidden pages

AeroBed Premier IntelliWarmth Cover User Manual [en, es, fr]

Specifications and Main Features

Frequently Asked Questions

User Manual